It is "iffy" and would be a good one to ask the proctor about. The BETTER solution is the one in the proctor guide. I say that because with the PG solution of inter-area filtering you are not allowing the information into the area at all. With your solution, the information is still being injected into the area, but R9 is just not moving it into the RIB. The information is still in the OSPF database in your case. Therefore it could potentially be interpreted that the routes were "sent" to R9.
2009/7/22 khaled Saholy <[email protected]> > > Dear Experts, > I have some questions regading the VOL3 labs. So I'll start with lab7. > In lab 7 , task 3.5 , the task is asking for R9 to receive only even > routes from BB2 via serial 0/2/0 only and the odd routes via serial 0/2/1 > only. The solutions in the proctor guide has been configured in R6 with two > long prefix-lists. I did the configuration in R9 with the (distribute-list > in) with the access-lists and it gave me the same result. > > Is my solution correct ? > > Thanks for the reply in advance. > > Khaled Al-Saholy > > > > ------------------------------ > See all the ways you can stay connected to friends and > family<http://www.microsoft.com/windows/windowslive/default.aspx> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
