For some reason it appears that the route-map is not being applied and I am not certain why. I checked the PG and unless I am blind I have the exact same config but as you can see below the address that should show up as 65003 are still as 60000. I also checked the final config file and noticed that the file has a typo. The PG shows it using route-map Task18, however the final config has "Task21" as the name of the route-map. There is no Route-map Task21 anywhere within the final config only Task18. Does anyone see the issue with this config? R1 router bgp 60000 network 92.1.80.0 mask 255.255.255.0 network 92.1.81.0 mask 255.255.255.0 network 92.1.82.0 mask 255.255.255.0 network 92.1.83.0 mask 255.255.255.0 network 100.100.100.0 mask 255.255.255.0 network 150.100.12.0 mask 255.255.255.0 network 200.0.0.1 mask 255.255.255.255 neighbor 150.100.12.2 remote-as 109 neighbor 150.100.12.2 route-map Task18 out ! ip classless ! access-list 21 permit 92.1.80.0 0.0.3.255 route-map Task18 permit 10 match ip address 21 set origin egp 65003 ! route-map Task18 permit 20 ---------------------------------------------------------------- R2 router bgp 64512 no synchronization bgp log-neighbor-changes bgp confederation identifier 109 bgp confederation peers 64513 64514 64613 network 150.100.12.0 mask 255.255.255.0 network 150.100.24.0 mask 255.255.255.0 network 150.100.25.0 mask 255.255.255.0 network 150.100.100.0 mask 255.255.255.0 network 200.0.0.2 mask 255.255.255.255 neighbor 150.100.12.1 remote-as 60000 neighbor 150.100.24.4 remote-as 64512 neighbor 150.100.100.5 remote-as 64513 no auto-summary Network Next Hop Metric LocPrf Weight Path *> 92.1.80.0/24 150.100.12.1 0 0 60000 e *> 92.1.81.0/24 150.100.12.1 0 0 60000 e *> 92.1.82.0/24 150.100.12.1 0 0 60000 e *> 92.1.83.0/24 150.100.12.1 0 0 60000 e *> 100.100.100.0/24 150.100.12.1 0 0 60000 i * 150.100.12.0/24 150.100.12.1 0 0 60000 i *> 0.0.0.0 0 32768 i *> 150.100.24.0/24 0.0.0.0 0 32768 i * 150.100.25.0/24 150.100.100.5 0 100 0 (64513) i *> 0.0.0.0 0 32768 i *>i150.100.40.0/24 150.100.24.4 0 100 0 i *>i150.100.41.0/24 150.100.24.4 0 100 0 i *> 150.100.100.0/24 0.0.0.0 0 32768 i *> 150.100.220.0/24 150.100.100.5 0 100 0 (64513) i *> 150.100.221.0/24 150.100.100.5 0 100 0 (64513) i *> 200.0.0.1/32 150.100.12.1 0 0 60000 i *> 200.0.0.2/32 0.0.0.0 0 32768 i Network Next Hop Metric LocPrf Weight Path *>i200.0.0.4/32 150.100.24.4 0 100 0 i *> 200.0.0.5/32 150.100.100.5 0 100 0 (64513) i *> 200.0.0.6/32 150.100.100.6 0 100 0 (64513 64514) i Rob Phillips, MCSE, CCNP, CCDA, CCEA Network Engineer Swank Audio Visuals 639E Gravois Bluff Blvd Fenton, Mo 63026 636-680-2840 (Direct) 888-Swank-IS (888-792-6547) 636-680-2890 (Fax) www.swankav.com [email protected] SwankLogoR - We Provide Creativity, Confidence and Comfort by delivering "Flawless Execution" with a hospitality approach on every event. - We transform ordinary meetings into extraordinary events. Checked by AVG - www.avg.com Version: 8.5.375 / Virus Database: 270.12.94/2207 - Release Date: 07/14/09 18:03:00
<<image001.jpg>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
