We are asked to configure R8 for ODR, and R7 should receive a default
route from R8.
I was marked wrong on the verified Proctor Labs:
Begin R7 Section 3.5 Testing
R7#show ip route odr
o* 0.0.0.0/0 [160/1] via 145.45.78.8, 00:00:31, Serial0/0/0
R7#
R7 Section 3.5 is Correct
Begin R8 Section 3.5 Testing
R8#show ip route odr
145.45.0.0/16 is variably subnetted, 26 subnets, 5 masks
o 145.45.7.0/24 [160/1] via 145.45.78.7, 00:00:44, Serial0/0/0
10.0.0.0/32 is subnetted, 8 subnets
o 10.2.7.7 [160/1] via 145.45.78.7, 00:00:44, Serial0/0/0
o 10.3.7.7 [160/1] via 145.45.78.7, 00:00:44, Serial0/0/0
R8#
R8 Section 3.5 is not Correct
Expected three routes from R7
145.45.7.0/24, 10.2.7.7/32, and 10.3.7.7/32
I'm not sure why this wrong; the output on R8 shows all 3 of these
routes.
Thanks,
Rich
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
