Thanks. Cheers.
----- Original Message ----- From: Wayne Lawson [[email protected]] Sent: 07/04/2009 01:06 PM AST To: Robert Wyzykowski Cc: Larry Hadrava <[email protected]>; ccie_rs <[email protected]>; Ryan Barnum <[email protected]>; Drew LePla <[email protected]> Subject: Re: [OSL | CCIE_RS] CCIE Lab version 4.0 study material availability They should be in the same members area. I will copy support for assistance. Regards, Wayne A. Lawson II - CCIE #5244 Founder, President & CEO: - IPexpert, Inc. - Proctor Labs, Inc. - Platinum Solutions Group, LLC. Mailto: [email protected] Mobile: +1.810.334.1564 :: Message sent from iPhone. On Jul 4, 2009, at 1:00 PM, Robert S Wyzykowski <[email protected]> wrote:
I only see workbooks volume 1,2, and3. Under "my ebooks" section of the web site. Is that where I should be looking? Or are the updates in some other section of the web page? Where would these updates be? From: Larry Hadrava [[email protected]] Sent: 07/04/2009 12:50 PM AST To: Robert Wyzykowski Cc: ccie_rs <[email protected]> Subject: Re: [OSL | CCIE_RS] CCIE Lab version 4.0 study material availability Robert: We are shipping our updated workbooks for the new R&S blueprint now with the detailed solution guides to come shortly. Please check your IPexpert members area for the updates. Thanks Larry Hadrava CCIE #12203 CCNP Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Sat, Jul 4, 2009 at 12:23 PM, Robert S Wyzykowski <[email protected] > wrote: When is the CCIE Version 4 study material going to be available? There are no more seats available for the 3.0 lab, so it looks like my next attempt I'll have to deal with the new blue print. I'd like to get started on the new material ASAP. Thanks From: Bryan Bartik [[email protected]] Sent: 07/04/2009 10:02 AM CST To: [email protected] Cc: [email protected] Subject: Re: [OSL | CCIE_RS] workbook 1 lab 9 - cat addressing Eric, what volume is this? What page of the PG are you looking at? Thanks, On Sat, Jul 4, 2009 at 9:51 AM, Eric Stanfield <[email protected]> wrote: Apologies if I am again missing something written in the guide, but I can't seem to find any indication of what interfaces should be built on the 4 switches in order to peer them together in as10101. When I load the configs into the proctorlabs rack, cat1 has a svi in 150.100.81.0/24 with which it can later peer with R8 and then a handful of routed interfaces which appear to be one side of routed links to the other three cats. Cat2 has no l3 interfaces until the 200.x.x.x loopbacks are created. Cat3 and Cat4 have no l3 interfaces at all. The PG shows Cat2/3/4 being configured with network commands referencing the subnets shown in the bottom right of diagram 1. Is this some unspoken task of having to finalize the routed link configs on Cat2/3/4 or am I just missing something obvious. Thanks -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
