Richard, Yes you are right about the B2B Frame Relay. DLCI's don;t have to be the same as long as you map them properly on each side. Like this:
R6: interface MFR1 ip address 172.30.96.0 255.255.255.254 no keepalive frame-relay map ip 172.30.96.0 609 frame-relay map ip 172.30.96.1 906 broadcast frame-relay interface-dlci 609 R9: interface MFR1 ip address 172.30.96.1 255.255.255.254 no keepalive frame-relay map ip 172.30.96.1 906 frame-relay map ip 172.30.96.0 609 broadcast frame-relay interface-dlci 609 On Fri, Jul 3, 2009 at 9:00 AM, Meraz, Richard <[email protected]>wrote: > The task asks to configure the two links between R6 and R9 using DLIC 609 > on R6 and DLCI 906 for 172.30.96.0/31. The PG has a multilink solution. > Shouldn’t this be configured for MFR? Also, since this is back to back > frame relay, don’t the DLCIs have to be the same on both sides? > > > > Thanks, > Rich > > > -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
