I believe just EIGRP stub will work as it automatically includes connected routes but lab it and see Regards,
Joe Astorino CCIE #24347 (R&S) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com -----Original Message----- From: M Jay <[email protected]> Date: Tue, 30 Jun 2009 15:43:01 To: IP expert<[email protected]> Subject: [OSL | CCIE_RS] plz suggest--- EIGRP Hi, I have a question plz suggest ( please find the attached dig. ) Question is to Configure EIGRP AS-100 routing protocol between Rx and BBx (Backbone router): BBx never sends queries to Rx including Rx loopback 0 Solution: Router EIGRP 100 Network 150.3.1.1 0.0.0.0 no auto EIGRP Stub Or Router EIGRP 100 Network 150.3.1.1 0.0.0.0 no auto EIGRP Stub redistribute connected Or Router EIGRP 100 Network 150.3.1.1 0.0.0.0 no auto EIGRP Stub redistribute connected summary The connected keyword will permit the EIGRP Stub Routing feature to send connected routes. If the connected routes are not covered by a network statement, it may be necessary to redistribute connected routes with the redistribute connected command under the EIGRP process. This option is enabled by default. (http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/eigrpstb.html) which option is correct and should I use the keyword redistribute-connected as the above statement says that it is enabled by default Thanks & Regards, M. Jay _________________________________________________________________ Windows Live™ SkyDrive™: Get 25 GB of free online storage. http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009
