Hi, You seem to have mailed the Cap'n Proto mailing list. Cap'n Proto is a serialization format typically used at OSI layer 6, e.g. between a client and server communicating over the internet, or as a file format.
Your question doesn't seem to be in any way related to Cap'n Proto. Your question seems to be about OSI layer 1 protocols (hardware link layer), which are far away from anything Cap'n Proto does. Sorry, I don't think we can help you. -Kenton On Sat, Dec 2, 2017 at 11:12 PM, T Obulesu <[email protected]> wrote: > Hello All, Here is my sensor topology.. [image: enter image description > here] <https://i.stack.imgur.com/b1y6r.jpg> > > Here, the atmega128 is the main controller and all other atmega8 are > connected to the main controller using rs485 cable. > > What is the best communication protocol for this to detect and avoid > collision.? > > I have 20 atmega8 connected in a row..(i.e all the tx pins of atmega8 are > connected together and finally connected to the Rx of the main controller) > and distance between the any atmega8 or atmega128 is 3 meters.... > > -- > You received this message because you are subscribed to the Google Groups > "Cap'n Proto" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > Visit this group at https://groups.google.com/group/capnproto. > -- You received this message because you are subscribed to the Google Groups "Cap'n Proto" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/capnproto.
