Dave Jones has proposed merging ~waveform/ubuntu-manual-tests:pi-server-changes
into ubuntu-manual-tests:main.
Requested reviews:
Ubuntu Testcase Admins (ubuntu-testcase)
For more details, see:
https://code.launchpad.net/~waveform/ubuntu-manual-tests/+git/ubuntu-manual-tests/+merge/473755
Various changes to the Pi server test cases that I noticed during the Oracular
Beta testing. Each commit is a specific change to the definitions, with the
last commit simply being the regeneration of the output.
--
Your team Canonical's Ubuntu QA is subscribed to branch
ubuntu-manual-tests:main.
diff --git a/definitions/pi_server_cases.xml b/definitions/pi_server_cases.xml
index 54f6a4f..42ac3af 100644
--- a/definitions/pi_server_cases.xml
+++ b/definitions/pi_server_cases.xml
@@ -35,6 +35,17 @@
</dd>
</ut:test>
+ <ut:test id="running">
+ <dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+ </ut:test>
+
<ut:test id="flash-kernel">
<dt>
Run <code>sudo flash-kernel</code>
@@ -170,6 +181,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
@@ -198,20 +210,19 @@
<dt>
With <ut:var name="device" />, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the <ut:var name="output" />:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the <ut:var name="output" /> (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the <ut:var name="output" />:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the <ut:var name="output" /></li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -224,6 +235,7 @@
<ut:case id="1711_RaspberryPi 4 2GB Post-install">
<ut:define name="model">Raspberry Pi 4 2GB</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -253,6 +265,7 @@
<ut:case id="1719_RaspberryPi 4 4GB Post-install">
<ut:define name="model">Raspberry Pi 4 4GB</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -282,6 +295,7 @@
<ut:case id="1720_RaspberryPi 4 8GB Post-install">
<ut:define name="model">Raspberry Pi 4 8GB</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -311,6 +325,7 @@
<ut:case id="1721_RaspberryPi 3B+ Post-install">
<ut:define name="model">Raspberry Pi 3B+</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -333,6 +348,7 @@
<ut:case id="1722_RaspberryPi 3B Post-install">
<ut:define name="model">Raspberry Pi 3B</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -355,6 +371,7 @@
<ut:case id="1723_RaspberryPi 3A+ Post-install">
<ut:define name="model">Raspberry Pi 3A+</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -376,6 +393,7 @@
<ut:case id="1724_RaspberryPi 2 Post-install">
<ut:define name="model">Raspberry Pi 2</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -395,6 +413,7 @@
<ut:case id="1726_RaspberryPi CM3+ Post-install">
<ut:define name="model">Raspberry Pi Compute Module 3+</ut:define>
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -409,6 +428,7 @@
<ut:case id="1727_RaspberryPi CM3+ Lite Post-install">
<ut:define name="model">Raspberry Pi Compute Module 3+ Lite</ut:define>
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -424,6 +444,7 @@
<ut:case id="1740_RaspberryPi 400 Post-install">
<ut:define name="model">Raspberry Pi 400</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -446,11 +467,7 @@
<ut:case id="1741_RaspberryPi CM4 2GB Post-install">
<ut:define name="model">Raspberry Pi Compute Module 4 2GB</ut:define>
- <ut:define name="post-install">
- <p>Before booting your CM4 with the new image, edit config.txt on the boot
- (1st) partition and uncomment the <code>#dtoverlay=dwc2,dr_mode=host</code>
- line to ensure the USB ports on the IO board operate correctly</p>
- </ut:define>
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -473,11 +490,7 @@
<ut:case id="1742_RaspberryPi CM4 4GB Post-install">
<ut:define name="model">Raspberry Pi Compute Module 4 4GB</ut:define>
- <ut:define name="post-install">
- <p>Before booting your CM4 with the new image, edit config.txt on the boot
- (1st) partition and uncomment the <code>#dtoverlay=dwc2,dr_mode=host</code>
- line to ensure the USB ports on the IO board operate correctly</p>
- </ut:define>
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -500,11 +513,7 @@
<ut:case id="1777_RaspberryPi CM4 8GB Post-install">
<ut:define name="model">Raspberry Pi Compute Module 4 8GB</ut:define>
- <ut:define name="post-install">
- <p>Before booting your CM4 with the new image, edit config.txt on the boot
- (1st) partition and uncomment the <code>#dtoverlay=dwc2,dr_mode=host</code>
- line to ensure the USB ports on the IO board operate correctly</p>
- </ut:define>
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -533,6 +542,7 @@
activity, but should otherwise remain lit.
</ut:define>
</ut:include>
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -547,9 +557,36 @@
<ut:include ref="bluetooth" />
</ut:case>
+ <ut:case id="1824_RaspberryPi 5 2GB Post-install">
+ <ut:define name="model">Raspberry Pi 5 2GB</ut:define>
+ <ut:include ref="power-led" />
+ <ut:include ref="running" />
+ <ut:include ref="flash-kernel" />
+ <ut:include ref="reboot" />
+ <ut:include ref="shutdown" />
+ <ut:include ref="ram-free"><ut:define name="mem">1.6-1.8GB</ut:define></ut:include>
+ <ut:include ref="usb-file-transfer" />
+ <ut:include ref="usb-keyboard"><ut:define name="usb">USB2 (black)</ut:define></ut:include>
+ <ut:include ref="usb-keyboard"><ut:define name="usb">USB3 (blue)</ut:define></ut:include>
+ <ut:include ref="audio">
+ <ut:define name="device">an HDMI monitor that supports audio plugged into
+ the HDMI0 output</ut:define>
+ <ut:define name="output">HDMI0 port</ut:define>
+ </ut:include>
+ <ut:include ref="audio">
+ <ut:define name="device">an HDMI monitor that supports audio plugged into
+ the HDMI1 output</ut:define>
+ <ut:define name="output">HDMI1 port</ut:define>
+ </ut:include>
+ <ut:include ref="ethernet"><ut:define name="intf">eth0</ut:define></ut:include>
+ <ut:include ref="wifi"><ut:define name="intf">wlan0</ut:define></ut:include>
+ <ut:include ref="bluetooth" />
+ </ut:case>
+
<ut:case id="1793_RaspberryPi 5 4GB Post-install">
<ut:define name="model">Raspberry Pi 5 4GB</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
@@ -575,6 +612,7 @@
<ut:case id="1794_RaspberryPi 5 8GB Post-install">
<ut:define name="model">Raspberry Pi 5 8GB</ut:define>
<ut:include ref="power-led" />
+ <ut:include ref="running" />
<ut:include ref="flash-kernel" />
<ut:include ref="reboot" />
<ut:include ref="shutdown" />
diff --git a/testcases/image/1711_RaspberryPi 4 2GB Post-install b/testcases/image/1711_RaspberryPi 4 2GB Post-install
index 29a5ddf..a14a58f 100644
--- a/testcases/image/1711_RaspberryPi 4 2GB Post-install
+++ b/testcases/image/1711_RaspberryPi 4 2GB Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -99,20 +109,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -126,20 +135,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -152,20 +160,19 @@
<dt>
With a pair of headphones with a 3.5mm jack, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the headphone jack:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the headphone jack (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the headphone jack:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the headphone jack</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -222,6 +229,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1719_RaspberryPi 4 4GB Post-install b/testcases/image/1719_RaspberryPi 4 4GB Post-install
index e4c350a..560d7aa 100644
--- a/testcases/image/1719_RaspberryPi 4 4GB Post-install
+++ b/testcases/image/1719_RaspberryPi 4 4GB Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -99,20 +109,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -126,20 +135,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -152,20 +160,19 @@
<dt>
With a pair of headphones with a 3.5mm jack, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the headphone jack:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the headphone jack (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the headphone jack:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the headphone jack</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -222,6 +229,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1720_RaspberryPi 4 8GB Post-install b/testcases/image/1720_RaspberryPi 4 8GB Post-install
index e9bf868..473bfcc 100644
--- a/testcases/image/1720_RaspberryPi 4 8GB Post-install
+++ b/testcases/image/1720_RaspberryPi 4 8GB Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -99,20 +109,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -126,20 +135,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -152,20 +160,19 @@
<dt>
With a pair of headphones with a 3.5mm jack, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the headphone jack:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the headphone jack (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the headphone jack:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the headphone jack</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -222,6 +229,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1721_RaspberryPi 3B+ Post-install b/testcases/image/1721_RaspberryPi 3B+ Post-install
index 7d86774..4e3c9d6 100644
--- a/testcases/image/1721_RaspberryPi 3B+ Post-install
+++ b/testcases/image/1721_RaspberryPi 3B+ Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -90,20 +100,19 @@
<dt>
With an HDMI monitor that supports audio, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -116,20 +125,19 @@
<dt>
With a pair of headphones with a 3.5mm jack, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the headphone jack:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the headphone jack (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the headphone jack:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the headphone jack</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -186,6 +194,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1722_RaspberryPi 3B Post-install b/testcases/image/1722_RaspberryPi 3B Post-install
index a9fa390..cf084bd 100644
--- a/testcases/image/1722_RaspberryPi 3B Post-install
+++ b/testcases/image/1722_RaspberryPi 3B Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -90,20 +100,19 @@
<dt>
With an HDMI monitor that supports audio, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -116,20 +125,19 @@
<dt>
With a pair of headphones with a 3.5mm jack, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the headphone jack:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the headphone jack (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the headphone jack:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the headphone jack</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -186,6 +194,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1723_RaspberryPi 3A+ Post-install b/testcases/image/1723_RaspberryPi 3A+ Post-install
index c9de086..2269b88 100644
--- a/testcases/image/1723_RaspberryPi 3A+ Post-install
+++ b/testcases/image/1723_RaspberryPi 3A+ Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -90,20 +100,19 @@
<dt>
With an HDMI monitor that supports audio, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -116,20 +125,19 @@
<dt>
With a pair of headphones with a 3.5mm jack, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the headphone jack:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the headphone jack (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the headphone jack:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the headphone jack</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -171,6 +179,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1724_RaspberryPi 2 Post-install b/testcases/image/1724_RaspberryPi 2 Post-install
index 61dc8c4..8000863 100644
--- a/testcases/image/1724_RaspberryPi 2 Post-install
+++ b/testcases/image/1724_RaspberryPi 2 Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -90,20 +100,19 @@
<dt>
With an HDMI monitor that supports audio, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -116,20 +125,19 @@
<dt>
With a pair of headphones with a 3.5mm jack, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the headphone jack:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the headphone jack (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the headphone jack:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the headphone jack</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
diff --git a/testcases/image/1726_RaspberryPi CM3+ Post-install b/testcases/image/1726_RaspberryPi CM3+ Post-install
index d404995..c069a71 100644
--- a/testcases/image/1726_RaspberryPi CM3+ Post-install
+++ b/testcases/image/1726_RaspberryPi CM3+ Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -12,6 +12,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -81,20 +91,19 @@
<dt>
With an HDMI monitor that supports audio, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
diff --git a/testcases/image/1727_RaspberryPi CM3+ Lite Post-install b/testcases/image/1727_RaspberryPi CM3+ Lite Post-install
index f159d81..8c65552 100644
--- a/testcases/image/1727_RaspberryPi CM3+ Lite Post-install
+++ b/testcases/image/1727_RaspberryPi CM3+ Lite Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -12,6 +12,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -81,20 +91,19 @@
<dt>
With an HDMI monitor that supports audio, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
diff --git a/testcases/image/1740_RaspberryPi 400 Post-install b/testcases/image/1740_RaspberryPi 400 Post-install
index a0df411..1728bc0 100644
--- a/testcases/image/1740_RaspberryPi 400 Post-install
+++ b/testcases/image/1740_RaspberryPi 400 Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -83,20 +93,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -110,20 +119,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -180,6 +188,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1741_RaspberryPi CM4 2GB Post-install b/testcases/image/1741_RaspberryPi CM4 2GB Post-install
index 5607718..13a736d 100644
--- a/testcases/image/1741_RaspberryPi CM4 2GB Post-install
+++ b/testcases/image/1741_RaspberryPi CM4 2GB Post-install
@@ -1,21 +1,27 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
+
<p>This test case is to be carried out on a Raspberry Pi Compute Module 4 2GB.</p>
<p>Follow the installation steps at <a href="https://ubuntu.com/download/iot/installation-media";>
IoT installation media</a>
</p>
-
- <p>Before booting your CM4 with the new image, edit config.txt on the boot
- (1st) partition and uncomment the <code>#dtoverlay=dwc2,dr_mode=host</code>
- line to ensure the USB ports on the IO board operate correctly</p>
-
<dl>
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -78,20 +84,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -105,20 +110,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -175,6 +179,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1742_RaspberryPi CM4 4GB Post-install b/testcases/image/1742_RaspberryPi CM4 4GB Post-install
index f2b4a88..7970c01 100644
--- a/testcases/image/1742_RaspberryPi CM4 4GB Post-install
+++ b/testcases/image/1742_RaspberryPi CM4 4GB Post-install
@@ -1,21 +1,27 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
+
<p>This test case is to be carried out on a Raspberry Pi Compute Module 4 4GB.</p>
<p>Follow the installation steps at <a href="https://ubuntu.com/download/iot/installation-media";>
IoT installation media</a>
</p>
-
- <p>Before booting your CM4 with the new image, edit config.txt on the boot
- (1st) partition and uncomment the <code>#dtoverlay=dwc2,dr_mode=host</code>
- line to ensure the USB ports on the IO board operate correctly</p>
-
<dl>
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -78,20 +84,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -105,20 +110,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -175,6 +179,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1752_RaspberryPi Zero 2 Post-install b/testcases/image/1752_RaspberryPi Zero 2 Post-install
index 67a8d54..cb76175 100644
--- a/testcases/image/1752_RaspberryPi Zero 2 Post-install
+++ b/testcases/image/1752_RaspberryPi Zero 2 Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -24,6 +24,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -86,20 +96,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -141,6 +150,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1777_RaspberryPi CM4 8GB Post-install b/testcases/image/1777_RaspberryPi CM4 8GB Post-install
index 0184cac..8fa1a9b 100644
--- a/testcases/image/1777_RaspberryPi CM4 8GB Post-install
+++ b/testcases/image/1777_RaspberryPi CM4 8GB Post-install
@@ -1,21 +1,27 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
+
<p>This test case is to be carried out on a Raspberry Pi Compute Module 4 8GB.</p>
<p>Follow the installation steps at <a href="https://ubuntu.com/download/iot/installation-media";>
IoT installation media</a>
</p>
-
- <p>Before booting your CM4 with the new image, edit config.txt on the boot
- (1st) partition and uncomment the <code>#dtoverlay=dwc2,dr_mode=host</code>
- line to ensure the USB ports on the IO board operate correctly</p>
-
<dl>
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -78,20 +84,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -105,20 +110,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -175,6 +179,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1793_RaspberryPi 5 4GB Post-install b/testcases/image/1793_RaspberryPi 5 4GB Post-install
index 86d8a6e..bc2c98b 100644
--- a/testcases/image/1793_RaspberryPi 5 4GB Post-install
+++ b/testcases/image/1793_RaspberryPi 5 4GB Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -99,20 +109,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -126,20 +135,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -196,6 +204,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1794_RaspberryPi 5 8GB Post-install b/testcases/image/1794_RaspberryPi 5 8GB Post-install
index d9dc003..6a0a905 100644
--- a/testcases/image/1794_RaspberryPi 5 8GB Post-install
+++ b/testcases/image/1794_RaspberryPi 5 8GB Post-install
@@ -1,6 +1,6 @@
<!-- Please do not edit this file directly; it was generated with the
tools/test_case_gen script using the following configuration as input:
- ./definitions/pi_server_cases.xml
+ definitions/pi_server_cases.xml
-->
@@ -21,6 +21,16 @@
<dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
Run <code>sudo flash-kernel</code>
</dt>
<dd>
@@ -99,20 +109,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI0 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI0 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI0 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -126,20 +135,19 @@
With an HDMI monitor that supports audio plugged into
the HDMI1 output, and an available MP3 file:
<ul>
- <li>Install mpg321 and amixer with <code>sudo apt install mpg321
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
alsa-utils</code></li>
- <li>Find the correct hardware output for the HDMI1 port:
- <code>cat /proc/asound/cards</code> and note the number at the start
- of the line for the HDMI1 port (usually 0 and possibly
- 1 for any connected monitor(s), and 1 or possibly 2 for the headphone
- jack)</li>
- <li>Attempt to play your MP3 file with: <code>mpg321 -o alsa -a
- hw:<em>num</em>,0 <em>music.mp3</em></code> substituting
- <em>num</em> for the number found during the previous step, and
- <em>music.mp3</em> for your choice of MP3 file, e.g. <code>mpg321 -o
- alsa -a hw:0,0 "Jeff Wayne - War of the
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
Worlds.mp3"</code></li>
- <li>Use <tt>Ctrl+C</tt> to end playback early, if you wish</li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
<li>If you cannot hear anything, first check that the mixer's volume is
not set too low; run <code>alsamixer</code>, and adjust the volume
(<tt>J</tt> for down, <tt>K</tt> for up) before exiting
@@ -196,6 +204,7 @@
<dt>
Configure bluetooth, scan for, and pair, a device
<ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
<li>Run <code>sudo bluetoothctl</code></li>
<li>Check bluetoothctl prints <code>Agent registered</code></li>
<li>Check the MAC address looks "real" (not some obviously blank
diff --git a/testcases/image/1824_RaspberryPi 5 2GB Post-install b/testcases/image/1824_RaspberryPi 5 2GB Post-install
new file mode 100644
index 0000000..d45707f
--- /dev/null
+++ b/testcases/image/1824_RaspberryPi 5 2GB Post-install
@@ -0,0 +1,239 @@
+<!-- Please do not edit this file directly; it was generated with the
+ tools/test_case_gen script using the following configuration as input:
+ definitions/pi_server_cases.xml
+-->
+
+
+ <p>This test case is to be carried out on a Raspberry Pi 5 2GB.</p>
+ <p>Follow the installation steps at <a href="https://ubuntu.com/download/iot/installation-media";>
+ IoT installation media</a>
+ </p>
+ <dl>
+
+
+ <dt>
+ After powering on the machine, look at the power LED
+ </dt>
+ <dd>
+ The power LED illuminates and stays illuminated while the kernel continues
+ to boot.
+ </dd>
+
+
+ <dt>
+ After logging in, run <code>systemctl status</code>, and look at the
+ "State:" reported at the top of the output
+ </dt>
+ <dd>
+ State should be reported as "running". In particular, it should
+ <em>not</em> read "degraded".
+ </dd>
+
+
+ <dt>
+ Run <code>sudo flash-kernel</code>
+ </dt>
+ <dd>
+ Exit code is clean (0) and no error messages are reported
+ </dd>
+
+
+ <dt>
+ Run <code>sudo reboot</code>
+ </dt>
+ <dd>
+ System reboots successfully to a login prompt
+ </dd>
+
+
+ <dt>
+ Run <code>sudo shutdown -h now</code>
+ </dt>
+ <dd>
+ System shuts down in a reasonable time (less than a minute)
+ </dd>
+
+
+ <dt>
+ Check output of <code>free -h</code>
+ </dt>
+ <dd>
+ Reported "Mem" under "total" is consistent with a
+ Raspberry Pi 5 2GB. It should be in the region of 1.6-1.8GB.
+ </dd>
+
+
+ <dt>
+ Perform a large (300-600MB) file copy to USB storage
+ <ul>
+ <li>Generate a large (500MB) file: <code>dd if=/dev/urandom of=rubbish
+ bs=1M count=500</code></li>
+ <li>Insert a USB stick (appropriately sized) into a spare USB port</li>
+ <li>Make a mount directory: <code>sudo mkdir /mnt/stick</code></li>
+ <li>Mount the stick: <code>sudo mount /dev/sda1 /mnt/stick</code>
+ (modify mount-point as necessary; check <code>sudo dmesg</code>
+ output if unsure)</li>
+ <li>Copy the file: <code>sudo cp rubbish /mnt/stick/</code></li>
+ <li>Unmount the stick: <code>sudo umount /mnt/stick</code></li>
+ <li>Remove the stick from the USB port</li>
+ <li>Re-insert the stick into the USB port</li>
+ <li>Re-mount the stick: <code>sudo mount /dev/sda1 /mnt/stick</code>
+ (again, adjust mount-point as necessary)</li>
+ <li>Compare the copied file to that on the stick: <code>cmp rubbish
+ /mnt/stick/rubbish</code></li>
+ </ul>
+ </dt>
+ <dd>
+ <code>cmp</code> returns 0 and outputs nothing, indicating the files are
+ identical
+ </dd>
+
+
+ <dt>
+ Connect a USB keyboard to one of the USB2 (black) ports
+ </dt>
+ <dd>
+ Verify that keys typed on the keyboard appear on the console
+ </dd>
+
+
+ <dt>
+ Connect a USB keyboard to one of the USB3 (blue) ports
+ </dt>
+ <dd>
+ Verify that keys typed on the keyboard appear on the console
+ </dd>
+
+
+ <dt>
+ With an HDMI monitor that supports audio plugged into
+ the HDMI0 output, and an available MP3 file:
+ <ul>
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
+ alsa-utils</code></li>
+ <li>Find the correct card name for the HDMI0 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI0 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
+ Worlds.mp3"</code></li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
+ <li>If you cannot hear anything, first check that the mixer's volume is
+ not set too low; run <code>alsamixer</code>, and adjust the volume
+ (<tt>J</tt> for down, <tt>K</tt> for up) before exiting
+ (<tt>Esc</tt>) and retrying playback</li>
+ </ul>
+ </dt>
+ <dd>Audio can be heard through the device</dd>
+
+
+ <dt>
+ With an HDMI monitor that supports audio plugged into
+ the HDMI1 output, and an available MP3 file:
+ <ul>
+ <li>Install ffmpeg and amixer with <code>sudo apt install ffmpeg
+ alsa-utils</code></li>
+ <li>Find the correct card name for the HDMI1 port:
+ <code>cat /proc/asound/cards</code> and note the name in [brackets]
+ for the HDMI1 port</li>
+ <li>Attempt to play your MP3 file with: <code>ffmpeg -i
+ <em>music.mp3</em> -f alsa default:CARD=<em>name</em></code>
+ substituting <em>name</em> for the card name found during the
+ previous step, and <em>music.mp3</em> for your choice of MP3 file,
+ e.g. <code>mpg321 -o alsa -a hw:0,0 "Jeff Wayne - War of the
+ Worlds.mp3"</code></li>
+ <li>Use <tt>Ctrl+C</tt> or <tt>q</tt> to end playback early, if you
+ wish</li>
+ <li>If you cannot hear anything, first check that the mixer's volume is
+ not set too low; run <code>alsamixer</code>, and adjust the volume
+ (<tt>J</tt> for down, <tt>K</tt> for up) before exiting
+ (<tt>Esc</tt>) and retrying playback</li>
+ </ul>
+ </dt>
+ <dd>Audio can be heard through the device</dd>
+
+
+ <dt>
+ Check auto-configuration of ethernet
+ <ul>
+ <li>Run <code>ip addr</code></li>
+ <li>Check that a valid IP address is recorded on the eth0 interface</li>
+ <li>Check <code>ping google.com</code> successfully pings a few times
+ (<tt>Ctrl+C</tt> to cancel)</li>
+ </ul>
+ </dt>
+ <dd>
+ The "eth0" interface should have a DHCP
+ assigned IP address and you should be able to ping google.com
+ </dd>
+
+
+ <dt>
+ Configure wifi via netplan
+ <ul>
+ <li>Place the following in <code>/etc/netplan/wifi.yaml</code>
+ (substituting the SSID and password as necessary):</li>
+ <li><pre>
+ network:
+ version: 2
+ wifis:
+ wlan0:
+ dhcp4: true
+ access-points:
+ my-ssid-here:
+ password: my-password-here</pre>
+ </li>
+ <li>Run <code>sudo netplan apply</code></li>
+ <li>Wait a few seconds (to allow DHCP to complete), then run <code>ip
+ addr</code></li>
+ <li>Check that a valid IP address is recorded on the wlan0 interface</li>
+ <li>Check <code>ping google.com</code> successfully pings a few times
+ (<tt>Ctrl+C</tt> to cancel)</li>
+ </ul>
+ </dt>
+ <dd>
+ The "wlan0" interface should have a DHCP
+ assigned IP address and you should be able to ping google.com
+ </dd>
+
+
+ <dt>
+ Configure bluetooth, scan for, and pair, a device
+ <ul>
+ <li>Install bluez with <code>sudo apt install bluez</code></li>
+ <li>Run <code>sudo bluetoothctl</code></li>
+ <li>Check bluetoothctl prints <code>Agent registered</code></li>
+ <li>Check the MAC address looks "real" (not some obviously blank
+ value like AA:AA:AA:AA:AA:AA)</li>
+ <li>Run <code>scan on</code></li>
+ <li>Make some other Bluetooth device visible for pairing (e.g. go into
+ Bluetooth settings on your Android phone)</li>
+ <li>Verify the other Bluetooth device appears in console output</li>
+ <li>Run <code>pair XX:XX:XX:XX:XX:XX</code>
+ where XX:XX:XX:XX:XX:XX is the other device's MAC address, as it
+ appears in scan output
+ </li>
+ <li>Verify the passcode on both devices</li>
+ <li>Check output includes "Pairing successful"</li>
+ <li>Disable scanning with <code>scan off</code></li>
+ <li>Exit tool with <code>quit</code></li>
+ </ul>
+ </dt>
+ <dd>
+ The Bluetooth interface should have a valid MAC address (not
+ AA:AA:AA:AA:AA:AA), can see and pair with another Bluetooth device.
+ </dd>
+
+
+ </dl>
+ <p>If <strong>all</strong> actions produce the expected results listed,
+ please <a href="results#add_result">submit</a> a 'passed' result.</p>
+ <p>If <strong>any</strong> action fails, or produces an unexpected result,
+ please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include
+ the bug number when you <a href="results#add_result">submit</a> your
+ result.</p>
+
\ No newline at end of file
--
Mailing list: https://launchpad.net/~canonical-ubuntu-qa
Post to : canonical-ubuntu-qa@lists.launchpad.net
Unsubscribe : https://launchpad.net/~canonical-ubuntu-qa
More help : https://help.launchpad.net/ListHelp
