I agree on ordering from ABR Industries. I see that you have placed the
order already. I have ordered from them in the past and each time I
received the shipment within two to three days. I just recently received
a length of 50 foot of RG8X with the ferrite beads, and I'm going to
determine if the 50 foot with beads performs any different than the 50
foot RG8X coax I have without beads.
From what I have heard on k8MRD's YouTube videos, ABR Industries is
going to stop distributing their coax to HRO, though I don't know when
that will take place.
73
John Denison
KD5YOU
On 11/28/2023 12:08 PM, David Lira via BVARC wrote:
Hi all,
I'm looking for 25+ish feet of rg8x or similar /better lighter weight
50ohm coax to complete the run going from my tuner to the antenna.
This will allow me to go from my mobile setup to a fixed position and
back again.
If anyone has some scrap laying around they're willing to let go of I
would be grateful. If the coax has one or no connectors that's fine, i
only need one end with a pl259 and the other bare and can attach my
own if needed.
I'll come to you or meet wherever.
Also is there some place local that sells decent quality coax? It's a
bummer trying to get this stuff shipped and I would prefer to shop
local when I can.
73,
David Lira - KJ5BGL
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here:
https://www.mail-archive.com/bvarc@bvarc.org/
________________________________________________
Brazos Valley Amateur Radio Club
BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/
