All, I’m looking forward to meeting more of BVARC at this weekend’s hamfest. Keeping fingers crossed for good weather.
Some of you know that I’ve been attempting to get a permit from the City of Pearland to put up a tower in my back yard. I’ve run into issues that make it nearly impossible. Pearland adopted a Unified Development Code in 2006. It specifies that amateur radio antenna towers are allowed as long as they are “less than fifty (50’) feet in height”. Brazoria County code requires that structures be rated for 110mph Basic Wind Speed. Not unreasonable given our proximity to hurricanes. There are only 2 manufacturers of self-supporting towers that meet the Basic Wind Speed requirement: Heights Towers and A/N wireless. Their products come in 10’ sections. So, this means that a tower can be built in 10’ increments. In communication with the building permits folks, a 50’ tower would not be allowed because the UDC specifies “less than”. So, in order to comply with all of the codes, only a 40’ tower can be erected. That gives only about 3-5’ clearance from the top of my house and a Yagi would rake the roofline in a wind. * This is largely a political issue. I’ve tried to get a Conditional Use Permit for a 70’ tower, that failed, then I tried for a 50’ tower and that failed. Back in NC, I was an OES with ARES. I like DX and emergency comms. PRB-1 is just fine as long as you have the dollars to fight in court. I don’t have many dollars left right now. I’m new to the area < 2 years. I’ve not yet participated with ARES, but am eager to join in. But I need your help. I’m sure that some of you have participated in Ecomms here in TX. Can we get a list of the served agencies and contact people so that they can get on the side of this? Would some of you come to a City Council meeting to give a show of support? At the meeting I attended, I overheard one of the council members asking “Why is ham radio still around. If I want to contact somebody on the other side of the world, I have the Internet.” vy 73, Bill, N4HPG _______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
