> -----Original Message----- > From: Alex Harui [mailto:aha...@adobe.com] > Sent: Sunday, 15 December 2013 4:19 AM > To: builds@apache.org; ga...@16degrees.com.au; 'Erik de Bruin' > Subject: Re: [windows1] Pixelbender installation > > Hi Gavin, > > The build script is using a simple Ant Delete task and can't delete jars. > Can you assist in investigating why the delete is failing?
Seems the jars think they are still being used, and refuse to delete. At the next opportunity when no or little builds running, I'll have to reboot the slave. To answer another question, this slave has not been rebuilt or modified in any way prior to these builds starting to fail (that I know of). Only thing I've been doing extra to investigating your builds is also building a new windows2 slave that is obviously needed. Note also my delayed replies are due to me being GMT + 10 Gav... > > Thanks, > -Alex > > > On 12/14/13 7:33 AM, "Alex Harui" <aha...@adobe.com> wrote: > > >It occurred to me that the tests are also going to want a window so if > >we're having issues with that, it could have causes the tests to hang > >waiting for them to even run. > > > >I've removed the test target and started a new build. But we'll see if > >it can delete those jars or not. > > > >-Alex > > > >On 12/14/13 7:12 AM, "Alex Harui" <aha...@adobe.com> wrote: > > > >>Hi Gavin, > >> > >>Looks like build are running. Jenkins says that a flex-sdk build was > >>running, compiled cleanly but timed out after an hour while running > >>tests, and then the next flex-sdk build failed because it couldn't > >>delete some jars. > >> > >>I'm wondering if the job that was running tests somehow locked those > >>jars? > >> Can you delete those jars manually (or tell me how to; I'm a newbie > >>at Jenkins? Also, can you confirm that the server was not rebuilt. > >>Our build will fail and get stuck running tests if the FlashPlayer "trust" > >>files are not set up properly which I believe is a manual step on a > >>fresh setup. > >> > >>Thanks, > >>-Alex > >> > >>On 12/14/13 2:05 AM, "Gavin McDonald" <ga...@16degrees.com.au> > wrote: > >> > >>> > >>> > >>>> -----Original Message----- > >>>> From: Erik de Bruin [mailto:e...@ixsoftware.nl] > >>>> Sent: Saturday, 14 December 2013 6:00 PM > >>>> To: Alex Harui > >>>> Cc: builds@apache.org; ga...@16degrees.com.au > >>>> Subject: Re: [windows1] Pixelbender installation > >>>> > >>>> Gavin, please, please, pretty please, can you have a look at the > >>>>'windows1' > >>>> situation? Please? > >>>> > >>>> Or, if you don't have time - which I would totally understand and > >>>>respect - please tell us so one of the other 8 admins on the > >>>>'windows1' slave can step in. > >>>> > >>>> Our project needs the builds, as I explained in earlier > >>>>communications, third party teams depend on them and I think we > may > >>>>be loosing their cooperation and contributions if we don't deliver > >>>>soon. > >>> > >>>Yep, totally understand about that. Rest assured the stability of the > >>>Jenkins and buildbot builds is a priority. > >>> > >>>Gav... > >>> > >>>> > >>>> EdB > >>>> > >>>> > >>>> > >>>> On Fri, Dec 13, 2013 at 8:19 AM, Alex Harui <aha...@adobe.com> > wrote: > >>>> > We just pushed changes to put all the pixel bender stuff in its > >>>> > own upstream package that won't be built by Jenkins (because it > >>>> > rarely changes). Theoretically, this eliminates the need for the > >>>> > Flex > >>>>build > >>>> > to need a window. We'll see how the next builds come out. > >>>> > > >>>> > Thank you for trying to fix this. Creating the upstream package > >>>>isn't > >>>> > just a workaround for this issue, it also gives us a more > >>>> > consistent build experience for our Linux users as the > >>>> > PixelBender compiler > >>>>does > >>>> > not work on Linux. > >>>> > > >>>> > Hopefully the builds will start to work now, but I won't be > >>>>surprised > >>>> > if there is some other issue waiting to be discovered. > >>>> > > >>>> > Thanks, > >>>> > -Alex > >>>> > > >>>> > On 12/12/13 8:24 AM, "OmPrakash Muppirala" > <bigosma...@gmail.com> > >>>> wrote: > >>>> > > >>>> >>On Dec 12, 2013 12:45 AM, "Gavin McDonald" > >>>> >><ga...@16degrees.com.au> > >>>> wrote: > >>>> >>> > >>>> >>> So, the slave is configured for Œweb start¹ via JNLP and that > >>>> >>> is > >>>>how > >>>> >>> it > >>>> >>is currently connected. > >>>> >>> > >>>> >>> The Œservice¹ was also running (which JNLP can control too) so > >>>> >>> I turned > >>>> >>that off and set it to > >>>> >>> > >>>> >>> Œmaunal¹ start only. > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> There are 3 builds running. I¹ll reboot the server at an > >>>>appropriate > >>>> >>interval within the next hour or > >>>> >>> > >>>> >>> so and we¹ll try again. > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> GavŠ > >>>> >>> > >>>> >> > >>>> >>Okay, can you please let me know when you start it again? > >>>> >> > >>>> >>Thanks, > >>>> >>Om > >>>> >> > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> From: omup...@gmail.com [mailto:omup...@gmail.com] On > Behalf Of > >>>> >>>OmPrakash > >>>> >>Muppirala > >>>> >>> Sent: Thursday, 12 December 2013 7:15 PM > >>>> >>> To: builds@apache.org; Gavin McDonald > >>>> >>> Cc: Erik de Bruin > >>>> >>> > >>>> >>> Subject: Re: [windows1] Pixelbender installation > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> Hi Gav, > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> Any updates on this issue? > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> Thanks, > >>>> >>> > >>>> >>> Om > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> On Tue, Dec 10, 2013 at 4:02 PM, OmPrakash Muppirala > >>>> >>><bigosma...@gmail.com> > >>>> >>wrote: > >>>> >>>> > >>>> >>>> On Tue, Dec 10, 2013 at 3:53 PM, Gavin McDonald > >>>> >>>><ga...@16degrees.com.au> > >>>> >>wrote: > >>>> >>>>> > >>>> >>>>> > >>>> >>>>> > >>>> >>>>> > -----Original Message----- > >>>> >>>>> > From: omup...@gmail.com [mailto:omup...@gmail.com] On > >>>> >>>>> > Behalf > >>>> Of > >>>> >>>>> > OmPrakash Muppirala > >>>> >>>>> > >>>> >>>>> > Sent: Wednesday, 11 December 2013 10:51 AM > >>>> >>>>> > To: Gavin McDonald > >>>> >>>>> > Cc: builds@apache.org; Erik de Bruin > >>>> >>>>> > Subject: Re: [windows1] Pixelbender installation > >>>> >>>>> > > >>>> >>>>> > >>>> >>>>> > On Tue, Dec 10, 2013 at 3:46 PM, OmPrakash Muppirala > >>>> >>>>> > <bigosma...@gmail.com>wrote: > >>>> >>>>> > > >>>> >>>>> > > On Tue, Dec 10, 2013 at 3:39 PM, Gavin McDonald > >>>> >>>>> > <ga...@16degrees.com.au>wrote: > >>>> >>>>> > > > >>>> >>>>> > >> Interesting, and puzzling why, but interactive desktop > >>>> >>>>> > >> flag was turned off. > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> I've now re-enabled it, please try again. > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >>>> >>>>> > >> Gav. > >>>> >>>>> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > > Great! I have kicked off a build. Will report back in a > >>>>bit. > >>>> >>>>> > > > >>>> >>>>> > > Was the windows1 slave started via JNLP or as a windows > >>>>service? > >>>> >>>>> > > Starting via JNLP (using webstart) ensures that the > >>>> >>>>> > > interactive > >>>> >>flag is > >>>> >>>>> set. > >>>> >>>>> > > Whereas if it is modified to be started as a service, you > >>>>will > >>>> >>>>>have > >>>> >>to > >>>> >>>>> > > manually turn the interactive flag (which sometimes may > >>>> >>>>> > > not > >>>> >>propagate > >>>> >>>>> > > all the way down the process we try to invoke) > >>>> >>>>> > > > >>>> >>>>> > > If this does not work, will you be able to restart the > >>>> >>>>> > > slave via > >>>> >>JNLP? > >>>> >>>>> > > > >>>> >>>>> > > Thanks, > >>>> >>>>> > > Om > >>>> >>>>> > > > >>>> >>>>> > > >>>> >>>>> > Yes, the build failed as I was typing my previous response. > >>>> >>>>> > > >>>> >>>>> > Any chance you could restart the windows1 Jenkins instance > >>>> >>>>> > as just a > >>>> >>JNLP > >>>> >>>>> > slave agent instead of modifying it into windows webservice? > >>>>[1] > >>>> >>>>> > >>>> >>>>> I could, but I don't understand, this Jenkins slave has been > >>>> >>>>>running as > >>>> >>a > >>>> >>>>> service since the day > >>>> >>>>> I built it years ago. > >>>> >>>>> > >>>> >>>>> Gav... > >>>> >>>> > >>>> >>>> > >>>> >>>> > >>>> >>>> I don't understand too, but doing this in our test environment > >>>> >>>>fixed the > >>>> >>problem, whereas manually setting the interactive flag did not. > >>>> >>As you mentioned earlier, something somewhere reset the > >>>> >>interactive > >>>>flag > >>>> >>on the root process. Unless you want to dig deeper and figure > >>>> >>out what happened, I think that restarting it to run as a JNLP > >>>> >>slave > >>>>agent > >>>> >>should fix the problem (as per Jenkins' docs) . > >>>> >>>> > >>>> >>>> Do you have any other ideas on how to fix this? > >>>> >>>> > >>>> >>>> Thanks, > >>>> >>>> Om > >>>> >>>> > >>>> >>>> > >>>> >>>> > >>>> >>>>> > >>>> >>>>> > >>>> >>>>> > > >>>> >>>>> > Thanks, > >>>> >>>>> > Om > >>>> >>>>> > > >>>> >>>>> > [1] > >>>> >>>>> > https://wiki.jenkins- > >>>> >>>>> > > >>>> > >>>>>>ci.org/display/JENKINS/Installing+Jenkins+as+a+Windows+service#I > ns > >>>>>>tal > >>>>>>l > >>>> >>ingJ > >>>> >>>>> > enkinsasaWindowsservice- > >>>> >>>>> > > InstallSlaveasaWindowsservice%28require.NET2.0framework%29 > >>>> >>>>> > >>>> >>>>> > > >>>> >>>>> > > >>>> >>>>> > > >>>> >>>>> > > > >>>> >>>>> > > > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> *From:* omup...@gmail.com > [mailto:omup...@gmail.com] *On > >>>> >>>>> > >> Behalf > >>>> >>>>> > Of > >>>> >>>>> > >> *OmPrakash Muppirala > >>>> >>>>> > >>>> >>>>> > >> *Sent:* Wednesday, 11 December 2013 9:36 AM > >>>> >>>>> > >> *To:* builds@apache.org; Gavin McDonald > >>>> >>>>> > >> *Cc:* Erik de Bruin > >>>> >>>>> > >>>> >>>>> > >> > >>>> >>>>> > >> *Subject:* Re: [windows1] Pixelbender installation > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >>>> >>>>> > >> Thanks Gav! > >>>> >>>>> > >> > >>>> >>>>> > >> We did a bunch of tests to repro this issue on our side. > >>>>One > >>>> >>>>> > >> way > >>>> >>we > >>>> >>>>> > >> could reproduce this on our Jenkins installation was > >>>> >>>>> > >> that > >>>>if > >>>> >>>>> > >> we > >>>> >>>>>ran > >>>> >>>>> > >> the job as a service, we are getting the same error > >>>>messages > >>>> >>>>> > >> (AIF Internal exception). > >>>> >>>>> > >> > >>>> >>>>> > >> Jenkins docs says that for jobs that require Desktop > >>>> >>>>> > >> Access > >>>> >>>>>(which > >>>> >>>>> > >> Pixel Bender does), the root service process that is > >>>>running > >>>> >>>>> > >> the > >>>> >>job > >>>> >>>>> > >> needs to have the 'interactive flag' enabled in the > >>>> >>>>> > >> Windows > >>>> >>>>>Service > >>>> >>>>> > >> Manager. [1] > >>>> >>>>> > >> > >>>> >>>>> > >> One way this setting could have changed is if the way > >>>> >>>>> > >> the windows slave starts was modified. > >>>> >>>>> > >> > >>>> >>>>> > >> Can you please take a look under the hood and see if you > >>>>find > >>>> >>>>> > >> something amiss? > >>>> >>>>> > >> > >>>> >>>>> > >> Thanks, > >>>> >>>>> > >> Om > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> [1] > >>>> >>>>> > >> https://wiki.jenkins- > >>>> >>>>> > ci.org/display/JENKINS/My+software+builds+on+my+ > >>>> >>>>> > >> computer+but+not+on+Jenkins > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> On Tue, Dec 10, 2013 at 2:11 PM, Gavin McDonald > >>>> >>>>> > >> <ga...@16degrees.com.au> > >>>> >>>>> > >> wrote: > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > -----Original Message----- > >>>> >>>>> > >> > From: Erik de Bruin [mailto:e...@ixsoftware.nl] > >>>> >>>>> > >> > >>>> >>>>> > >> > Sent: Tuesday, 10 December 2013 7:14 PM > >>>> >>>>> > >> > To: builds@apache.org > >>>> >>>>> > >> > Cc: Gavin McDonald > >>>> >>>>> > >> > >>>> >>>>> > >> > Subject: Re: [windows1] Pixelbender installation > >>>> >>>>> > >> > > >>>> >>>>> > >> > Gavin, > >>>> >>>>> > >> > > >>>> >>>>> > >> > >>>> >>>>> > >> > Can you please copy-paste this line into a command > >>>> >>>>> > >> > prompt and > >>>> >>tell > >>>> >>>>> > >> > us > >>>> >>>>> > >> what > >>>> >>>>> > >> > the result is: > >>>> >>>>> > >> > > >>>> >>>>> > >> > "%PIXELBENDER_HOME%\pbutil.exe" > >>>> >>>>> > >> > "F:\hudson\hudson-slave\workspace\flex- > >>>> >>>>> > >> > > >>>> >>>>> > > >>>> > >>>>>sdk\frameworks\projects\framework\src\mx\graphics\shaderClasse > >>>> >>>>>s > >>>> \Color. > >>>> >>>>> > >> > pbk" > >>>> >>>>> > >> > "F:\hudson\hudson-slave\workspace\flex- > >>>> >>>>> > >> > > >>>> >>>>> > > >>>> > >>>>>sdk\frameworks\projects\framework\src\mx\graphics\shaderClasse > >>>> >>>>>s > >>>> \Color. > >>>> >>>>> > >> > >>>> >>>>> > >> > pbj" > >>>> >>>>> > >> > > >>>> >>>>> > >> > (mind the wrap) > >>>> >>>>> > >> > > >>>> >>>>> > >> > Thanks! > >>>> >>>>> > >> > >>>> >>>>> > >> Result is a slight pause, then the prompt returns. No > >>>>error, > >>>> >>>>> > >> no > >>>> >>output. > >>>> >>>>> > >> > >>>> >>>>> > >> (PixelBender is where its meant to be, > PIXELBENDER_HOME > >>>> >>>>> > >> is > >>>>a > >>>> >>>>> > >> user > >>>> >>>>> > >> variable.) > >>>> >>>>> > >> > >>>> >>>>> > >> Let me know what's next to check , thanks > >>>> >>>>> > >> > >>>> >>>>> > >> Gav... > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > > >>>> >>>>> > >> > EdB > >>>> >>>>> > >> > > >>>> >>>>> > >> > > >>>> >>>>> > >> > > >>>> >>>>> > >> > On Mon, Dec 9, 2013 at 11:16 PM, OmPrakash Muppirala > >>>> >>>>> > >> > <bigosma...@gmail.com> wrote: > >>>> >>>>> > >> > > On Mon, Dec 9, 2013 at 2:02 PM, Gavin McDonald > >>>> >>>>> > >> > <ga...@16degrees.com.au>wrote: > >>>> >>>>> > >> > > > >>>> >>>>> > >> > >> That's fine, I'll take a look. All I'm trying to > >>>> >>>>> > >> > >> get across > >>>> >>>>>is > >>>> >>>>> > >> > >> that NOTHING HAS CHANGED on the Windows slave, > so > >>>> >>>>> > >> > >> is > >>>>it > >>>> >>>>> > >> > >> very slightly possible that the build is failing > >>>> >>>>> > >> > >> due > >>>>to > >>>> >>>>> > >> > >> a coding error? In other words, I've been blamed > >>>>several > >>>> >>>>> > >> > >> times now > >>>> >>>>>for > >>>> >>>>> > >> > >> breaking the build when I haven't been anywhere > >>>> >>>>> > >> > >> near > >>>>the > >>>> >>machine > >>>> >>>>> > in question. > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > > The build does not fail on my or other committers' > >>>>machines. > >>>> >> It > >>>> >>>>> > >> > > must be something specific to whats happening in > >>>>Windows1. > >>>> >> Sorry > >>>> >>>>> > >> > > if it sounds like we are blaming you. We are just > >>>>trying > >>>> >>>>> > >> > > to troubleshoot and are running blind here. > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Either way I'll look. > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > Thanks! > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> And so that we are clear, windows1 is not going > >>>> >>>>> > >> > >> away, > >>>>it > >>>> >>>>> > >> > >> is > >>>> >>very > >>>> >>>>> > >> > >> heavily used, folks are always complaining it is > >>>> >>>>> > >> > >> down, so > >>>> >>>>>I'm > >>>> >>>>> > >> > >> adding a 2ndwindows2 slave in addition to the > >>>> >>>>> > >> > >> windows1 > >>>> >>>>>slave. > >>>> >>>>> > >> > >> Point is, you need to be configured to use both > >>>> >>>>> > >> > >> slaves for > >>>> >>>>>it > >>>> >>to > >>>> >>>>> > >> > >> work, or my time > >>>> >>>>> > >> > building a 2ndmachine is wasted and you'll continue to > >>>> >>>>> > >> > complain about > >>>> >>>>> > >> the > >>>> >>>>> > >> 1 > >>>> >>>>> > >> > st windows box being overloaded all the time. > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > We welcome the addition of a new windows slave, no > >>>>doubt. > >>>> >> Which > >>>> >>>>> > >> > > is why we want to fix Windows1 first. Otherwise it > >>>>will > >>>> >>>>> > >> > > lead > >>>> >>to > >>>> >>>>> > >> > > more variables to troubleshoot. > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > On that note, perhaps you can image windows1 and > >>>> >>>>> > >> > > create > >>>> >>windows2 > >>>> >>>>> > >> > > as a clone of it? > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > Regards, > >>>> >>>>> > >> > > Om > >>>> >>>>> > >> > > > >>>> >>>>> > >> > > > >>>> >>>>> > >> > >>>> >>>>> > >> > >> Gav. > >>>> >>>>> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> *From:* omup...@gmail.com > >>>> [mailto:omup...@gmail.com] *On > >>>> >>>>> > Behalf > >>>> >>>>> > >> > Of > >>>> >>>>> > >> > >> *OmPrakash Muppirala > >>>> >>>>> > >> > >> *Sent:* Tuesday, 10 December 2013 7:28 AM > >>>> >>>>> > >> > >> *To:* builds@apache.org > >>>> >>>>> > >> > >> *Cc:* Gavin McDonald > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> *Subject:* Re: [windows1] Pixelbender installation > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Gavin, > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> This issue is unrelated to Windows2 slave. Our > >>>> >>>>> > >> > >> long running > >>>> >>job > >>>> >>>>> > >> > >> on > >>>> >>>>> > >> > >> Windows1 has started failing for the past few days. > >>>>Can > >>>> >>>>> > >> > >> we first fix that before we start working on > Windows2? > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Or, is Windows2 a replacement for Windows1? > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Thanks, > >>>> >>>>> > >> > >> Om > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> On Sat, Dec 7, 2013 at 12:35 AM, Erik de Bruin > >>>> >>>>> > >> > >> <e...@ixsoftware.nl> > >>>> >>>>> > >> > wrote: > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Ok, from the top of this thread: > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> "The build on windows1 is failing on the 'Pixelbender' > >>>>task: > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> The build assumes Pixelbender is installed at: > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> PIXELBENDER_HOME=C\:/Program\ Files\ > >>>> (x86)/Adobe/Adobe > >>>> >>>>> > >> > >> Utilities\ - > >>>> >>>>> > >> > \ > >>>> >>>>> > >> > >> CS5/Pixel\ Bender\ Toolkit\ 2 > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Is that still the correct path and does the > >>>>application > >>>> >>>>>start > >>>> >>>>> > >> > >> without errors when you launch it manually?" > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> In another email in this thread I've listed the > >>>>software > >>>> >>>>>that > >>>> >>>>> > >> > >> needs to be on windows2. > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Is there a way to have all our builds run on either > >>>> >>>>> > >> > >> windows1 > >>>> >>OR > >>>> >>>>> > >> > >> windows2? Most of our jobs depend on files in the > >>>> >>>>> > >> > >> workspaces > >>>> >>of > >>>> >>>>> > >> > >> some of our other builds, in order to save on disk > >>>>space > >>>> >>>>> > >> > >> and > >>>> >>build > >>>> >>>>> > time. > >>>> >>>>> > >> > >> If we remove these dependencies, we'd basically be > >>>> >>>>> > >> > >> forced to copy each build into each other build. > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Since it is the weekend, I'll have limited time to > >>>>work > >>>> >>>>> > >> > >> with you, sorry. Next Monday I'll be glad to > >>>> >>>>> > >> > >> check/test/adjust whatever needs > >>>> checking/testing/adjusting. > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Please keep in mind that we are at a very important > >>>> >>>>>milestone > >>>> >>>>> > >> > >> for our project, and with third party teams relying > >>>> >>>>> > >> > >> on our nightly builds, we'd greatly appreciate a > >>>>successful > >>>> >>>>> > >> > >> run of > >>>> >>all > >>>> >>>>> > >> > >> our jobs, on whatever slave works. > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> EdB > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> -- > >>>> >>>>> > >> > >> Ix Multimedia Software > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> Jan Luykenstraat 27 > >>>> >>>>> > >> > >> 3521 VB Utrecht > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> T. 06-51952295 > >>>> >>>>> > >> > >> I. www.ixsoftware.nl > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > >> > >>>> >>>>> > >> > > >>>> >>>>> > >> > > >>>> >>>>> > >> > > >>>> >>>>> > >> > -- > >>>> >>>>> > >> > Ix Multimedia Software > >>>> >>>>> > >> > > >>>> >>>>> > >> > Jan Luykenstraat 27 > >>>> >>>>> > >> > 3521 VB Utrecht > >>>> >>>>> > >> > > >>>> >>>>> > >> > T. 06-51952295 > >>>> >>>>> > >> > I. www.ixsoftware.nl > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > >> > >>>> >>>>> > > > >>>> >>>>> > > > >>>> >>>> > >>>> >>>> > >>>> >>> > >>>> >>> > >>>> > > >>>> > >>>> > >>>> > >>>> -- > >>>> Ix Multimedia Software > >>>> > >>>> Jan Luykenstraat 27 > >>>> 3521 VB Utrecht > >>>> > >>>> T. 06-51952295 > >>>> I. www.ixsoftware.nl > >>> > >> > >
