Thanks Niklas.
I believe the slave is called the Project SpamAssassin-trunk
(https://builds.apache.org/hudson/job/SpamAssassin-trunk/)
To install the NetAddr module, you could do it a few different ways:
1 - as root, run cpan NetAddr::IP or cpan install NetAddr::IP (depends
on the version of cpan bundle installed)
2 - or you could install it manually with the following commands as root
should work.
cd /tmp/
wget
http://www.peregrinehw.com/downloads/SpamAssassin/NetAddr-IP-4.044.tar.gz
tar zxvf /tmp/20070905SPAM/NetAddr-IP-4.044.tar.gz
cd NetAddr-IP-4.044/
perl Makefile.PL
make test && make install
If you give us feedback on how that goes, we can then give you more
instructions for the other modules we would like.
Regards,
KAM
On 5/24/2011 3:06 PM, Niklas Gustavsson wrote:
This belongs on builds@a.o so I'm moving it there.
Yes, we can install this for you. On what slaves do you need it and
can you please provide instructions as to how we should install them?
/niklas
On Tue, May 24, 2011 at 7:07 PM, Kevin A. McGrail<kmcgr...@pccc.com> wrote:
Greetings,
My name is Kevin A. McGrail and I am a PMC member for the ASF SpamAssassin
project.
I am uncertain if this is something we can resolve without infrastructure
but we need perl modules installed/updated for Hudson/Jenkins.
Specifically, NetAddr::IP needs to be updated to 4.010 or later.
http://search.cpan.org/~miker/NetAddr-IP-4.044/
4.044 is the current version
That is the most pressing issue.
However, the following request has been made:
Similarly, Hudson is not testing several other optional modules:
SPF plugin because Mail::SPF is not installed; RelayCountry plugin
because IP::Country module is not installed; Razor plugin because
Razor2 module is not installed; DKIM plugin because Mail::DKIM
is not installed, and a few more non-essential items. It would
probably be prudent to install missing modules for Hudson (but I
don't know how). Also, can we get Hudson an IPv6 connectivity?
Is this something infrastructure handles or is this something we already
have the ability to maintain and upgrade?
Sincerely,
Kevin A. McGrail aka KAM
On 5/24/2011 12:55 PM, Apache Jenkins Server wrote:
See<https://builds.apache.org/hudson/job/SpamAssassin-trunk/7074/changes>
Changes:
[kmcgrail] Pass #2 on cleaning up Debian Files
[kmcgrail] Patch for issue 6520 - Might break Jenkins due to NetAddr::IP
requirement
[jm] auto-generated test rules
------------------------------------------
Started by an SCM change
Building remotely on solaris1
Updating http://svn.apache.org/repos/asf/spamassassin/trunk
U rulesrc/sandbox/jm/20_sought_fraud.cf
U debian/spamc.substvars
U debian/files
U debian/spamc.debhelper.log
U debian/spamc/DEBIAN/control
U debian/spamc/DEBIAN/md5sums
U debian/spamc/usr/share/doc/spamc/procmailrc.example
U debian/spamc/usr/share/doc/spamc/copyright
U debian/spamc/usr/share/doc/spamc/TRADEMARK
U debian/spamc/usr/share/doc/spamc/sample-spam.txt
U debian/spamc/usr/share/doc/spamc/README.Debian
U debian/spamassassin.debhelper.log
U lib/Mail/SpamAssassin/Util/DependencyInfo.pm
U MANIFEST
U Makefile.PL
At revision 1127137
[locks-and-latches] Checking to see if we really have the locks
[locks-and-latches] Have all the locks, build can start
[SpamAssassin-trunk] $ /bin/bash -xe /var/tmp/hudson3473510243112391558.sh
+ cd<https://builds.apache.org/hudson/job/SpamAssassin-trunk/ws/sa_trunk>
+ ./build/hudson/run_build
+ . /export/home/jm/tools/setenvs
PATH=/export/home/jm/tools/perl586/bin:/usr/ccs/bin:/sbin:/usr/sbin:/etc:/usr/etc:/usr/local/bin:/usr/bin/mh:/export/home/jm/bin:/sbin:/usr/sbin:/etc:/usr/etc:/usr/local/bin:/usr/bin/mh:/export/home/jm/bin:/sbin:/usr/sbin:/etc:/usr/etc:/usr/local/bin:/usr/bin/mh:/usr/bin:/opt/sfw/bin:/opt/SUNWspro/bin
+ export PATH
+ rm -rf t/log t/log.* artifacts testxml Mail-SpamAssassin-3.4.0
Mail-SpamAssassin-3.4.0.tar.gz
+ make distclean
rm -f \
blib/script/sa-compile blib/script/spamc \
blib/script/sa-learn blib/script/sa-awl \
blib/script/spamassassin blib/script/spamd \
blib/script/sa-check_spamd blib/script/sa-update
rm -f \
*.a core \
core.[0-9] blib/arch/auto/Mail/SpamAssassin/extralibs.all \
core.[0-9][0-9] SpamAssassin.bso \
pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
SpamAssassin.x \
perl tmon.out \
*.o pm_to_blib \
blib/arch/auto/Mail/SpamAssassin/extralibs.ld blibdirs.ts \
core.[0-9][0-9][0-9][0-9][0-9] *perl.core \
core.*perl.*.? Makefile.aperl \
perl SpamAssassin.def \
core.[0-9][0-9][0-9] mon.out \
libSpamAssassin.def perlmain.c \
perl.exe so_locations \
SpamAssassin.exp
rm -rf \
spamc/version.h spamc/config.log \
sa-check_spamd t/bayessql.cf \
doc spamc/qmail-spamc \
spamc/*.so pod2htm* \
spamc/*.o* t/do_net \
t/log t/sql_based_whitelist.cf \
version.env sa-update \
spamc/Makefile sa-learn \
spamd/spamd rules/*.pm \
spamc/replace/*.o* rules/70_inactive.cf \
sa-compile spamc/*.cache \
spamc/spamc spamc/config.status \
sa-awl spamassassin \
spamc/config.h spamc/spamc.h \
*.cache spamd/*spamc* \
blib qmail
mv Makefile Makefile.old> /dev/null 2>&1
rm -f \
Makefile.old Makefile
rm -rf \
Mail-SpamAssassin-3.4.0
/export/home/jm/tools/perl586/bin/perl "-MExtUtils::Manifest=fullcheck" -e
fullcheck
Not in MANIFEST: lib/Mail/SpamAssassin/Plugin/AskDNS.pm
+ mkdir artifacts testxml
+ perl Makefile.PL
What email address or URL should be used in the suspected-spam report
text for users who want more information on your filter installation?
(In particular, ISPs should change this to a local Postmaster contact)
default text: [the administrator of that system] the administrator of that
system
ERROR: the required NetAddr::IP module is installed ( 4.007),
but is below the minimum required version 4.010,
some functionality will not be available.
NOTE: settings for "make test" are now controlled using "t/config.dist".
See that file if you wish to customise what tests are run, and how.
checking module dependencies and their versions...
***************************************************************************
Used in determining which DNS tests are to be done for each of
the header's received fields, used by AWL plugin for extracting network
address from an IPv6 addresses (and from IPv4 address on nondefault
mask),
and used by DNSxL rules for assembling DNS queries out of IPv6
addresses.
4.010 fixes an issue where NetAddr::IP::full6() causes a full6.al
include
error.
Avoid versions 4.034 and 4.035.
***************************************************************************
NOTE: the optional Digest::SHA module is not installed.
The Digest::SHA module is required by the DKIM plugin.
***************************************************************************
NOTE: the optional DB_File module is not installed.
Used to store data on-disk, for the Bayes-style logic and
auto-whitelist. *Much* more efficient than the other standard Perl
database packages. Strongly recommended.
***************************************************************************
NOTE: the optional Mail::SPF module is not installed.
Used to check DNS Sender Policy Framework (SPF) records to fight email
address forgery and make it easier to identify spams.
***************************************************************************
NOTE: the optional IP::Country module is not installed.
Used by the RelayCountry plugin (not enabled by default) to determine
the domain country codes of each relay in the path of an email.
***************************************************************************
NOTE: the optional Razor2 module is not installed,
minimum required version is 2.61.
Used to check message signatures against Vipul's Razor collaborative
filtering network. Razor has a large number of dependencies on CPAN
modules. Feel free to skip installing it, if this makes you nervous;
SpamAssassin will still work well without it.
More info on installing and using Razor can be found
at http://wiki.apache.org/spamassassin/InstallingRazor .
***************************************************************************
NOTE: the optional Net::Ident module is not installed.
If you plan to use the --auth-ident option to spamd, you will need
to install this module.
***************************************************************************
NOTE: the optional IO::Socket::INET6 module is not installed.
This is required if the first nameserver listed in your IP
configuration or /etc/resolv.conf file is available only via an
IPv6 address. Also used by a DCC plugin to access dccifd over network.
***************************************************************************
NOTE: the optional Mail::DKIM module is not installed,
minimum required version is 0.31, recommended version is 0.37 or higher.
If this module is installed and the DKIM plugin is enabled,
SpamAssassin will perform DKIM signature verification when
DKIM-Signature
header fields are present in the message headers, and check ADSP rules
(e.g. anti-phishing) when a mail message does not contain a valid author
domain signature. Version 0.37 or later is needed to fully support ADSP.
***************************************************************************
NOTE: the optional Encode::Detect module is not installed.
If you plan to use the normalize_charset config setting to detect
charsets and convert them into Unicode, you will need to install
this module.
***************************************************************************
NOTE: the optional Net::Patricia module is not installed,
minimum required version is 1.16.
If this module is available, it will be used for IP address lookups
in tables internal_networks, trusted_networks, and msa_networks.
Recommended
when the number of entries in these tables is large, i.e. in hundreds or
thousands.
REQUIRED module out of date: NetAddr::IP
optional module missing: Digest::SHA
optional module missing: DB_File
optional module missing: Mail::SPF
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: Mail::DKIM
optional module missing: Encode::Detect
optional module missing: Net::Patricia
warning: some functionality may not be available,
please read the above report before continuing!
+ make
make: Fatal error: No arguments to build
[locks-and-latches] Releasing all the locks
[locks-and-latches] All the locks released
Archiving artifacts
Recording test results
