22.02.2026 18:25, Kirill A. Korinsky пишет:
> I've tried it on my EdgeRouter 4.
> 
> That I do have with snapshot which I just installed:
> 
> machine 1 -> ER4:
> 
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-30.00  sec  1.39 GBytes   397 Mbits/sec  15928             sender
> [  5]   0.00-30.01  sec  1.39 GBytes   397 Mbits/sec                  receiver
> 
> 
> machine 1 -> ER4 -> machine 2
> 
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-30.00  sec  1.71 GBytes   490 Mbits/sec  370688             
> sender
> [  5]   0.00-30.01  sec  1.71 GBytes   489 Mbits/sec                  receiver
> 
> machines are in different vlan.
> 
> Ok, next, cvs checkout with applied your diff:
> 
> machine 1 -> ER4:
> 
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-30.00  sec   590 MBytes   165 Mbits/sec  65568             sender
> [  5]   0.00-30.06  sec   590 MBytes   165 Mbits/sec                  receiver
> 
> machine 1 -> ER4 -> machine 2:
> 
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-30.00  sec   978 MBytes   273 Mbits/sec  2556800             
> sender
> [  5]   0.00-30.01  sec   976 MBytes   273 Mbits/sec                  receiver
> 
> plus extreamly bad performance from ER4 to NFS.
> 
> Next, cvs checkout without your diff:
> 
> machine 1 -> ER:
> 
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-30.00  sec  1.32 GBytes   377 Mbits/sec    0             sender
> [  5]   0.00-30.05  sec  1.32 GBytes   376 Mbits/sec                  receiver
> 
> machine 1 -> ER -> machine 2:
> 
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-30.00  sec  1.73 GBytes   495 Mbits/sec  637120             
> sender
> [  5]   0.00-30.01  sec  1.73 GBytes   494 Mbits/sec                  receiver


Thanks for testing, I certainly did not expect such a massive drop.

I'll test here as well and try to see what this is about before committing 
anything.

I wonder, if this is "just" a weak CPU or something else, e.g. specific to
octeon, NIC drivers and/or in your setup.

Can you share your iperf commands and a dmesg for completeness, please?

Cc'ing Janne:  You tried a similar diff on your boxes;  care to share
which ones and whether you saw any noticable change in performance?

Reply via email to