Hello! Need help with wireless. I use -current and wireless card AX201. Sometimes wireless disconnected and will not connect. Log from dmesg:
iwx0: hw rev 0x350, fw 77.30b1cbd8.0, address 60:e3:2b:f7:eb:94 iwx0: using firmware iwx-QuZ-a0-hr-b0-77 iwx0: begin active scan iwx0: INIT -> SCAN iwx0: end active scan iwx0: best AP 9e:05:d6:96:74:2d "wifi" score 77 iwx0: switching to network "wifi" iwx0: firmware has detected regulatory domain 'RU' (0x5255) iwx0: SCAN -> AUTH iwx0: sending auth to 9e:05:d6:96:74:2d on channel 40 mode 11a iwx0: AUTH -> ASSOC iwx0: sending assoc_req to 9e:05:d6:96:74:2d on channel 40 mode 11a iwx0: ASSOC -> RUN iwx0: associated with 9e:05:d6:96:74:2d ssid "wifi" channel 40 start MCS 0 long preamble long slot time HT enabled VHT enabled iwx0: missed beacon threshold set to 30 beacons, beacon interval is 100 TU iwx0: received msg 1/4 of the 4-way handshake from 9e:05:d6:96:74:2d iwx0: sending msg 2/4 of the 4-way handshake to 9e:05:d6:96:74:2d iwx0: received msg 3/4 of the 4-way handshake from 9e:05:d6:96:74:2d iwx0: sending msg 4/4 of the 4-way handshake to 9e:05:d6:96:74:2d iwx0: sending addba_resp to 9e:05:d6:96:74:2d on channel 40 mode 11ac iwx0: sending addba_resp to 9e:05:d6:96:74:2d on channel 40 mode 11ac iwx0: received msg 1/4 of the 4-way handshake from 9e:05:d6:96:74:2d iwx0: sending msg 2/4 of the 4-way handshake to 9e:05:d6:96:74:2d iwx0: received msg 3/4 of the 4-way handshake from 9e:05:d6:96:74:2d iwx0: sending msg 4/4 of the 4-way handshake to 9e:05:d6:96:74:2d iwx0: sending addba_resp to 9e:05:d6:96:74:2d on channel 40 mode 11ac iwx0: unhandled firmware response 0x3ff/0x20000008 rx ring 98[230] iwx0: dumping device error log iwx0: Start Error Log Dump: iwx0: Status: 0x39, count: 6 iwx0: 0x00000071 | NMI_INTERRUPT_UMAC_FATAL iwx0: 000022F0 | trm_hw_status0 iwx0: 00000000 | trm_hw_status1 iwx0: 004C972E | branchlink2 iwx0: 004BF5DA | interruptlink1 iwx0: 004BF5DA | interruptlink2 iwx0: 00005E20 | data1 iwx0: 00001000 | data2 iwx0: 00000000 | data3 iwx0: C5800033 | beacon time iwx0: A229EFE6 | tsf low iwx0: 00000002 | tsf hi iwx0: 00000000 | time gp1 iwx0: 9B18CD08 | time gp2 iwx0: 00000001 | uCode revision type iwx0: 0000004D | uCode version major iwx0: 30B1CBD8 | uCode version minor iwx0: 00000351 | hw version iwx0: 18889004 | board version iwx0: 802BFC18 | hcmd iwx0: 00020000 | isr0 iwx0: 00400000 | isr1 iwx0: 08F00002 | isr2 iwx0: 00C3028C | isr3 iwx0: 00000000 | isr4 iwx0: 0253001C | last cmd Id iwx0: 00005E20 | wait_event iwx0: 0000E241 | l2p_control iwx0: 00000020 | l2p_duration iwx0: 00000003 | l2p_mhvalid iwx0: 000000A0 | l2p_addr_match iwx0: 00000009 | lmpm_pmg_sel iwx0: 00000000 | timestamp iwx0: 00005878 | flow_handler iwx0: Start UMAC Error Log Dump: iwx0: Status: 0x39, count: 7 iwx0: 0x20003524 | ADVANCED_SYSASSERT iwx0: 0x00000000 | umac branchlink1 iwx0: 0x804561F6 | umac branchlink2 iwx0: 0xC0081228 | umac interruptlink1 iwx0: 0x00000000 | umac interruptlink2 iwx0: 0x9AF99028 | umac data1 iwx0: 0xDEADBEEF | umac data2 iwx0: 0xDEADBEEF | umac data3 iwx0: 0x0000004D | umac major iwx0: 0x30B1CBD8 | umac minor iwx0: 0x9B18CD03 | frame pointer iwx0: 0xC0885E8C | stack pointer iwx0: 0x00B50128 | last host cmd iwx0: 0x00000000 | isr status reg driver status: tx ring 0: qid=0 cur=182 cur_hw=182 queued=0 tx ring 1: qid=1 cur=42 cur_hw=42 queued=0 tx ring 2: qid=2 cur=85 cur_hw=85 queued=1 tx ring 3: qid=3 cur=227 cur_hw=227 queued=0 tx ring 4: qid=4 cur=0 cur_hw=0 queued=0 tx ring 5: qid=5 cur=0 cur_hw=0 queued=0 tx ring 6: qid=6 cur=0 cur_hw=0 queued=0 tx ring 7: qid=7 cur=0 cur_hw=0 queued=0 tx ring 8: qid=8 cur=0 cur_hw=0 queued=0 tx ring 9: qid=9 cur=0 cur_hw=0 queued=0 rx ring: cur=345 802.11 state RUN iwx0: fatal firmware error iwx0: RUN -> INIT iwx0: begin active scan iwx0: INIT -> SCAN iwx0: end active scan
