Grettings, fellow gentlemen and ladies.
Hereby I want to announce the following issue that I got while running
`torsocks sysupgrade -n` on 1 machine.
Dmesg should be attached below.
I'll summarize the sysupgrade output because the X11 doesn't work right
now so I can't easily copy everything now because of the current bug.
Fetching from [REDACTED for increased anonymity]
SHA256.sig 100% ...
Signature Verified
BUILDINFO 100% ...
INSTALL.amd64 100% ...
[literally everything else from base76.tgz to xshare76.tgz, all 100%]
Verifying sets.
(SHA256) bsd: FAILED
[literally everything else from this bsd to xshare76, all FAILED]
and that's where it ends.
If it were because of the transition to 76, then it would stop immediately,
right?
In all of my time of using OpenBSD, this is the 1st time this has happened
to me.
Does this have something to do with the specific mirror that I use?
Is that mirror being fishy?
I use Tor for anonymity reasons and have done this many times successfully.
The currently used snapshot should be like from within 24 hours.
Speaking of sysupgrade, if I use it with I2P (installurl is a localhost link
to a I2P tunnel that goes to a I2P mirror for OpenBSD), then sometimes it just
quits with 0 output, shortly after starting, OR
case b) it stalls forever, which probably has something to do with what Solene
said for this exact use-case - ftp drops the connection way too soon.
I made the entire process exactly ONCE, and it was such a good feeling!
Nothing better than downloading a snapshot for half a day, at 0-50kb/s :')
seriously, it feels like the good old days, except you're more-less anonymous,
safe and cozy.
It wouldn't be bad to have a verbose option for sysupgrade like some other
utilities do, but it more-less gets the job done so ohwell :/
OpenBSD 7.6-beta (GENERIC.MP) #263: Sun Aug 18 12:20:10 MDT 2024
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3899949056 (3719MB)
avail mem = 3758567424 (3584MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7d74a040 (15 entries)
bios0: vendor coreboot version "CBET4000 20220710" date 07/09/2022
bios0: LENOVO 6475J92
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG APIC DMAR HPET
acpi0: wakeup devices HDEF(S4) USB1(S4) USB2(S4) USB3(S4) EHC1(S4) USB4(S4)
USB5(S4) USB6(S4) EHC2(S4) SLT1(S4) SLT2(S4) SLT3(S4) SLT6(S4) LANC(S3)
LANR(S3) SLPB(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz, 1600.21 MHz, 06-17-0a, patch
00000a0b
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=408e3fd<SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
cpu0: cpuid 6 eax=3<SENSOR> ecx=3<EFFFREQ>
cpu0: cpuid a vers=2, gp=2, gpwidth=40, ff=3, ffwidth=40
cpu0: cpuid 80000001 edx=20100800<NXE,LONG> ecx=1<LAHF>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB 64b/line
24-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz, 1600.22 MHz, 06-17-0a, patch
00000a0b
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpi0: WARNING EC not initialized
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP03)
acpiprt5 at acpi0: bus 4 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 5 (PCIB)
acpiec0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: SLPB(wakeup)
acpibtn1 at acpi0: LID_(wakeup)
acpithinkpad0 at acpi0: version 1.0
acpicmos0 at acpi0
"PNP0C0B" at acpi0 not configured
"BOOT0000" at acpi0 not configured
acpicpu0 at acpi0: !C3(250@55 mwait.1@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: !C3(250@55 mwait.1@0x20), !C2(500@1 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpipwrres0 at acpi0: FPWR, resource for FAN_
acpitz1 at acpi0: critical temperature is 99 degC
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD0
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xa0000000, size 0x10000000
inteldrm0: apic 2 int 16, GM45, gen 4
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
NOADDRESSFORU
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03
pci4 at ppb3 bus 4
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 5
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int 16
"Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int 18
sdhc0: SDHC 1.00, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit
"Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
"Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, XXXXXXXXX, XX> xx.XXXXXX
sd0: xxx, 512 bytes/sector, xxx sectors
cd0 at scsibus1 targ 1 lun 0: <Optiarc, DVD RW AD-7910S, 1.D0> removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.0, 0x1c0b1 0xb00000 0x0 0xd04791 0x20000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: unknown
efifb at mainbus0 not configured
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/3.20 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: xxxMB, 512 bytes/sector, xxxx sectors
root on sd1a (xxxxx.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
urtwn0 at uhub0 port 1 configuration 1 interface 0 "Realtek 802.11n NIC" rev
2.00/0.00 addr 3
urtwn0: MAC/BB xxxxxx, xx xxx xxx, address NOADDRESSFORYOU
