Today after upgrading to latest snapshot xenodm hanged for a while.
During the hang I couldn't ssh from another machine. I had to reboot as
single user, comment out xenodm flag in /etc/rc.conf.local and reboot.
Using startx happened the same, the problem is with Xorg, it hangs
during several minutes and segfaults.
I tried changing from modesetting to intel driver but that didn't solve
the problem.
I also upgraded to latest snapshot in my laptop which also has a intel
integrated graphics and there Xorg starts correctly. So, the problem is
only with this machine.
xenodm info (pid 76990): Starting
xenodm info (pid 76990): Starting X server on :0
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: OpenBSD chancha.roquesor.com 7.6 GENERIC.MP#258 amd64
Current version of pixman: 0.42.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 17 10:59:43 2024
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
Failed to create /var/empty/.cache for shader cache (Permission
denied)---disabling.
WARNING: Kernel has no file descriptor comparison support: No such file or
directory
Failed to create /var/empty/.cache for shader cache (Permission
denied)---disabling.
(EE) Segmentation fault at address 0x1ddc18b3008
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
(EE)
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) Server terminated with error (1). Closing log file.
xenodm error (pid 76990): Server for display :0 terminated unexpectedly: 1536
xenodm info (pid 76990): Starting X server on :0
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: OpenBSD chancha.roquesor.com 7.6 GENERIC.MP#258 amd64
Current version of pixman: 0.42.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 17 11:03:29 2024
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
Failed to create /var/empty/.cache for shader cache (Permission
denied)---disabling.
WARNING: Kernel has no file descriptor comparison support: No such file or
directory
Failed to create /var/empty/.cache for shader cache (Permission
denied)---disabling.
(EE) Segmentation fault at address 0xe4529d74008
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
(EE)
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) Server terminated with error (1). Closing log file.
*** /var/log/Xorg.0.log ***
[ 678.472] (WW) checkDevMem: failed to open /dev/mem and /dev/xf86
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 678.472] linear framebuffer access unavailable
[ 678.502] (--) Using wscons driver on /dev/ttyC4
[ 678.535]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 678.535] Current Operating System: OpenBSD chancha.roquesor.com 7.6
GENERIC.MP#258 amd64
[ 678.535]
[ 678.535] Current version of pixman: 0.42.2
[ 678.535] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 678.535] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 678.536] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 17 11:10:34
2024
[ 678.536] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 678.536] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 678.537] (==) No Layout section. Using the first Screen section.
[ 678.537] (==) No screen section available. Using defaults.
[ 678.537] (**) |-->Screen "Default Screen Section" (0)
[ 678.537] (**) | |-->Monitor "<default monitor>"
[ 678.538] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 678.538] (**) | |-->Device "Intel"
[ 678.538] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 678.538] (**) Allowing byte-swapped clients
[ 678.538] (==) Automatically adding devices
[ 678.538] (==) Automatically enabling devices
[ 678.538] (==) Not automatically adding GPU devices
[ 678.538] (==) Automatically binding GPU devices
[ 678.538] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 678.538] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 678.538] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 678.538] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 678.538] (II) Loader magic: 0x842f8778500
[ 678.538] (II) Module ABI versions:
[ 678.538] X.Org ANSI C Emulation: 0.4
[ 678.538] X.Org Video Driver: 25.2
[ 678.538] X.Org XInput driver : 24.4
[ 678.539] X.Org Server Extension : 10.0
[ 678.539] (--) PCI:*(0@0:2:0) 8086:2992:103c:2802 rev 2, Mem @
0xf0400000/1048576, 0xe0000000/268435456, I/O @ 0x00001100/8
[ 678.539] (II) LoadModule: "glx"
[ 678.540] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 678.547] (II) Module glx: vendor="X.Org Foundation"
[ 678.547] compiled for 1.21.1.13, module version = 1.0.0
[ 678.547] ABI class: X.Org Server Extension, version 10.0
[ 678.547] (II) LoadModule: "modesetting"
[ 678.548] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 678.548] (II) Module modesetting: vendor="X.Org Foundation"
[ 678.548] compiled for 1.21.1.13, module version = 1.21.1
[ 678.548] Module class: X.Org Video Driver
[ 678.548] ABI class: X.Org Video Driver, version 25.2
[ 678.549] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 678.556] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 678.557] (II) modeset(0): using default device
[ 678.557] (II) modeset(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 678.557] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 678.557] (==) modeset(0): RGB weight 888
[ 678.557] (==) modeset(0): Default visual is TrueColor
[ 678.558] (II) Loading sub module "glamoregl"
[ 678.558] (II) LoadModule: "glamoregl"
[ 678.560] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 678.567] (II) Module glamoregl: vendor="X.Org Foundation"
[ 678.568] compiled for 1.21.1.13, module version = 1.0.1
[ 678.568] ABI class: X.Org ANSI C Emulation, version 0.4
[ 678.740] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R)
965Q (BW)
[ 678.740] (II) modeset(0): glamor initialized
[ 678.740] (==) modeset(0): VariableRefresh: disabled
[ 678.740] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 678.754] (II) modeset(0): Output VGA-1 has no monitor section
[ 678.772] (II) modeset(0): EDID for output VGA-1
[ 678.772] (II) modeset(0): Manufacturer: GSM Model: 4e79 Serial#: 301586
[ 678.772] (II) modeset(0): Year: 2007 Week: 6
[ 678.772] (II) modeset(0): EDID Version: 1.3
[ 678.772] (II) modeset(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 678.772] (II) modeset(0): Sync: Separate SyncOnGreen
[ 678.772] (II) modeset(0): Max Image Size [cm]: horiz.: 43 vert.: 27
[ 678.772] (II) modeset(0): Gamma: 2.20
[ 678.772] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[ 678.772] (II) modeset(0): First detailed timing is preferred mode
[ 678.772] (II) modeset(0): redX: 0.651 redY: 0.333 greenX: 0.277 greenY:
0.614
[ 678.772] (II) modeset(0): blueX: 0.145 blueY: 0.082 whiteX: 0.313 whiteY:
0.329
[ 678.772] (II) modeset(0): Supported established timings:
[ 678.772] (II) modeset(0): 720x400@70Hz
[ 678.772] (II) modeset(0): 640x480@60Hz
[ 678.772] (II) modeset(0): 640x480@75Hz
[ 678.772] (II) modeset(0): 800x600@56Hz
[ 678.772] (II) modeset(0): 800x600@60Hz
[ 678.772] (II) modeset(0): 800x600@75Hz
[ 678.772] (II) modeset(0): 832x624@75Hz
[ 678.772] (II) modeset(0): 1024x768@60Hz
[ 678.772] (II) modeset(0): 1024x768@75Hz
[ 678.772] (II) modeset(0): 1280x1024@75Hz
[ 678.772] (II) modeset(0): 1152x864@75Hz
[ 678.772] (II) modeset(0): Manufacturer's mask: 0
[ 678.772] (II) modeset(0): Supported standard timings:
[ 678.772] (II) modeset(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 678.772] (II) modeset(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 678.772] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 678.772] (II) modeset(0): #3: hsize: 1280 vsize 960 refresh: 60 vid:
16513
[ 678.772] (II) modeset(0): #4: hsize: 1152 vsize 864 refresh: 75 vid:
20337
[ 678.772] (II) modeset(0): Supported detailed timing:
[ 678.772] (II) modeset(0): clock: 119.0 MHz Image Size: 434 x 270 mm
[ 678.772] (II) modeset(0): h_active: 1680 h_sync: 1728 h_sync_end 1760
h_blank_end 1840 h_border: 0
[ 678.772] (II) modeset(0): v_active: 1050 v_sync: 1053 v_sync_end 1059
v_blanking: 1080 v_border: 0
[ 678.773] (II) modeset(0): Supported detailed timing:
[ 678.773] (II) modeset(0): clock: 146.2 MHz Image Size: 434 x 270 mm
[ 678.773] (II) modeset(0): h_active: 1680 h_sync: 1784 h_sync_end 1960
h_blank_end 2240 h_border: 0
[ 678.773] (II) modeset(0): v_active: 1050 v_sync: 1053 v_sync_end 1059
v_blanking: 1089 v_border: 0
[ 678.773] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max:
83 kHz, PixClock max 155 MHz
[ 678.773] (II) modeset(0): Monitor name: L204WS
[ 678.773] (II) modeset(0): EDID (in hex):
[ 678.773] (II) modeset(0): 00ffffffffffff001e6d794e129a0400
[ 678.773] (II) modeset(0): 061101036a2b1b78ead105a655479d25
[ 678.773] (II) modeset(0): 155054a76b80950f950081808140714f
[ 678.773] (II) modeset(0): 0101010101017c2e90a0601a1e403020
[ 678.773] (II) modeset(0): 3600b20e1100001a21399030621a2740
[ 678.773] (II) modeset(0): 68b03600b20e1100001c000000fd0038
[ 678.773] (II) modeset(0): 4b1c530f000a202020202020000000fc
[ 678.773] (II) modeset(0): 004c32303457530a202020202020007c
[ 678.773] (II) modeset(0): Printing probed modes for output VGA-1
[ 678.773] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760
1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[ 678.773] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 678.773] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 678.773] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 678.773] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688
1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 678.773] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 678.773] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 678.773] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 678.773] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 678.773] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 678.773] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 678.773] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 678.773] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 678.773] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 678.773] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 678.773] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 678.773] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 678.773] (II) modeset(0): Output VGA-1 connected
[ 678.773] (II) modeset(0): Using exact sizes for initial modes
[ 678.774] (II) modeset(0): Output VGA-1 using initial mode 1680x1050 +0+0
[ 678.774] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 678.774] (--) modeset(0): Display dimensions: (434, 270) mm
[ 678.774] (--) modeset(0): DPI set to (98, 98)
[ 678.774] (II) Loading sub module "fb"
[ 678.774] (II) LoadModule: "fb"
[ 678.774] (II) Module "fb" already built-in
[ 679.074] (==) modeset(0): Backing store enabled
[ 679.074] (==) modeset(0): Silken mouse enabled
[ 679.092] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 679.092] (==) modeset(0): DPMS enabled
[ 679.093] (II) modeset(0): [DRI2] Setup complete
[ 679.093] (II) modeset(0): [DRI2] DRI driver: crocus
[ 679.093] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 679.093] (II) Initializing extension Generic Event Extension
[ 679.094] (II) Initializing extension SHAPE
[ 679.095] (II) Initializing extension MIT-SHM
[ 679.096] (II) Initializing extension XInputExtension
[ 679.098] (II) Initializing extension XTEST
[ 679.099] (II) Initializing extension BIG-REQUESTS
[ 679.100] (II) Initializing extension SYNC
[ 679.101] (II) Initializing extension XKEYBOARD
[ 679.102] (II) Initializing extension XC-MISC
[ 679.103] (II) Initializing extension SECURITY
[ 679.104] (II) Initializing extension XFIXES
[ 679.105] (II) Initializing extension RENDER
[ 679.107] (II) Initializing extension RANDR
[ 679.109] (II) Initializing extension COMPOSITE
[ 679.110] (II) Initializing extension DAMAGE
[ 679.111] (II) Initializing extension MIT-SCREEN-SAVER
[ 679.112] (II) Initializing extension DOUBLE-BUFFER
[ 679.113] (II) Initializing extension RECORD
[ 679.114] (II) Initializing extension DPMS
[ 679.116] (II) Initializing extension Present
[ 679.117] (II) Initializing extension DRI3
[ 679.118] (II) Initializing extension X-Resource
[ 679.119] (II) Initializing extension XVideo
[ 679.120] (II) Initializing extension XVideo-MotionCompensation
[ 679.120] (II) Initializing extension GLX
[ 679.131] (II) AIGLX: Loaded and initialized crocus
[ 679.131] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 679.131] (II) Initializing extension XFree86-VidModeExtension
[ 679.133] (II) Initializing extension XFree86-DGA
[ 679.134] (II) Initializing extension XFree86-DRI
[ 679.134] (II) Initializing extension DRI2
[ 679.136] (II) modeset(0): Damage tracking initialized
[ 679.136] (II) modeset(0): Setting screen physical size to 434 x 270
[ 831.230] (EE) Segmentation fault at address 0x845c183d008
[ 831.231] (EE)
Fatal server error:
[ 831.231] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 831.231] (EE)
[ 831.231] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 831.231] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[ 831.231] (EE)
[ 837.825] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 839.538] (EE) Server terminated with error (1). Closing log file.
dmesg:
OpenBSD 7.6-beta (GENERIC.MP) #258: Sat Aug 17 01:11:49 MDT 2024
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4135260160 (3943MB)
avail mem = 3986751488 (3802MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeb920 (70 entries)
bios0: vendor Hewlett-Packard version "786E1 v01.16" date 08/17/2011
bios0: Hewlett-Packard HP Compaq dc7700 Convertible Minitower
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG TCPA SLIC HPET
acpi0: wakeup devices PCI0(S4) COM1(S4) PEG1(S4) IGBE(S4) PCX1(S4) PCX2(S4)
HUB_(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) EUS1(S3) EUS2(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz, 1795.56 MHz, 06-0f-02, patch
0000005d
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=e39d<SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu0: cpuid 6 eax=1<SENSOR> ecx=1<EFFFREQ>
cpu0: cpuid a vers=2, gp=2, gpwidth=40, ff=0, ffwidth=0
cpu0: cpuid 80000001 edx=20100800<NXE,LONG> ecx=1<LAHF>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 2MB 64b/line
8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz, 1795.61 MHz, 06-0f-02, patch
0000005d
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus 32 (PCX1)
acpiprt3 at acpi0: bus -1 (PCX2)
acpiprt4 at acpi0: bus 7 (HUB_)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
"PNP0003" at acpi0 not configured
acpibtn0 at acpi0: PBTN(wakeup)
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
cpu0: Enhanced SpeedStep 1795 MHz: speeds: 1800, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16, I965G, gen 4
"Intel 82Q965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP AMT" rev 0x02: apic 1 int 19,
address 00:0f:fe:77:4f:df
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 1 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 1 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 1 int
21
azalia0: codecs: Realtek ALC262
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02
pci1 at ppb0 bus 32
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 1 int 20
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 1 int 21
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci2 at ppb1 bus 7
pcib0 at pci0 dev 31 function 0 "Intel 82801HO LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD10EZEX-08M2NA0>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhidev0 at uhub5 port 1 configuration 1 interface 0 "EATON Eaton 3S" rev
1.10/1.00 addr 2
uhidev0: iclass 3/0, 255 report ids
upd0 at uhidev0
uhid0 at uhidev0 reportid 2: input=2, output=0, feature=2
uhid1 at uhidev0 reportid 3: input=4, output=0, feature=4
uhid2 at uhidev0 reportid 6: input=4, output=0, feature=4
uhid3 at uhidev0 reportid 7: input=0, output=0, feature=7
uhid4 at uhidev0 reportid 8: input=0, output=0, feature=1
uhid5 at uhidev0 reportid 9: input=0, output=0, feature=4
uhid6 at uhidev0 reportid 10: input=0, output=0, feature=4
uhid7 at uhidev0 reportid 11: input=0, output=0, feature=10
uhid8 at uhidev0 reportid 12: input=0, output=0, feature=7
uhid9 at uhidev0 reportid 13: input=0, output=0, feature=3
uhid10 at uhidev0 reportid 14: input=0, output=0, feature=2
uhid11 at uhidev0 reportid 16: input=0, output=0, feature=1
uhid12 at uhidev0 reportid 18: input=0, output=0, feature=1
uhid13 at uhidev0 reportid 19: input=0, output=0, feature=2
uhid14 at uhidev0 reportid 20: input=0, output=0, feature=1
uhid15 at uhidev0 reportid 21: input=0, output=0, feature=1
uhid16 at uhidev0 reportid 23: input=0, output=0, feature=5
uhid17 at uhidev0 reportid 24: input=0, output=0, feature=10
uhid18 at uhidev0 reportid 25: input=0, output=0, feature=1
uhid19 at uhidev0 reportid 31: input=0, output=0, feature=1
uhid20 at uhidev0 reportid 32: input=0, output=0, feature=1
uhid21 at uhidev0 reportid 34: input=0, output=0, feature=1
uhid22 at uhidev0 reportid 253: input=0, output=0, feature=1
uhid23 at uhidev0 reportid 254: input=0, output=0, feature=10
uhid24 at uhidev0 reportid 255: input=0, output=0, feature=63
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (5cd6a5a83e3a7d56.a) swap on wd0b dump on wd0b
inteldrm0: 1680x1050, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
usbdevs:
Controller /dev/usb0:
addr 01: 8086:0000 Intel, EHCI root hub
high speed, self powered, config 1, rev 1.00
driver: uhub0
Controller /dev/usb1:
addr 01: 8086:0000 Intel, EHCI root hub
high speed, self powered, config 1, rev 1.00
driver: uhub1
Controller /dev/usb2:
addr 01: 8086:0000 Intel, UHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub2
Controller /dev/usb3:
addr 01: 8086:0000 Intel, UHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub3
Controller /dev/usb4:
addr 01: 8086:0000 Intel, UHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub4
Controller /dev/usb5:
addr 01: 8086:0000 Intel, UHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub5
addr 02: 0463:ffff EATON, Eaton 3S
full speed, power 20 mA, config 1, rev 1.00, iSerial Blank
driver: uhidev0
