Hello,
My name is Asad, I have an MNT Reform with the standard iMX8MQ module. I
attempted to boot the miniroot74.img without any changes to the boot
parameters or using a modified dtb file and it unfortunately panicked.
I've attached the output in 'miniroot-unmodified-dtb.txt.' This issue is
known to the MNT Reform developers and I followed their install
instructions located here
https://community.mnt.re/t/any-news-on-openbsd-update-it-works-now/646/7
using their modified dtb file located here,
https://source.mnt.re/reform/reform-boundary-uboot/-/blob/master/openbsd-support/imx8mq-mnt-reform2.dtb
which disables the PCIe port, rendering my NVMe drive to be unnoticed by
the ramdisk, which can successfully boot after this change.
My interactive install is attached in the file
'install-modified-dtb.txt.' I installed it to the builtin eMMC drive.
The system successfully booted and I have attached the dmesg output in
'dmesg.txt' and the usbdev output in 'usbdev.txt.' There was no output
to pcidump -v in root and I wasn't sure what I should input to the
prefix for the acpidump command so those two files are not included.
After running syspatch at the first boot, once I rebooted, the kernel
panicked and I received a ddb prompt. I ran ps and trace on the prompt.
The system cannot boot anymore with the syspatch. I've attached this
file as 'boot-afterpatch.txt.' Since I couldn't run the system, I was
unable to use the sendbug command, so I emailed bugs@ as described in
the OpenBSD problem report webpage.
Please let me know if there is any other information needed from me to
assist in debugging this if this is of interest.
-Asad
Script started on Wed Dec 6 12:39:44 2023
Connected to /dev/cuaU0 (speed 115200)
U-Boot SPL 2018.07 MNT Reform 2023-10-18 (Oct 18 2023 - 20:25:52 +0000)
Setting voltages
config to do 3200 1d training.
config to do 667 1d training.
config to do 3200 2d training.
ARM_PLL 1000 MHz
SYS_PLL1_800 799 MHz
SYS_PLL1_400 399 MHz
SYS_PLL1_266 266 MHz
SYS_PLL1_200 199 MHz
SYS_PLL1_160 159 MHz
SYS_PLL1_133 133 MHz
SYS_PLL1_100 99 MHz
SYS_PLL1_80 79 MHz
SYS_PLL1_40 39 MHz
SYS_PLL2_1000 999 MHz
SYS_PLL2_500 499 MHz
SYS_PLL2_333 333 MHz
SYS_PLL2_250 249 MHz
SYS_PLL2_200 199 MHz
SYS_PLL2_166 166 MHz
SYS_PLL2_125 124 MHz
SYS_PLL2_100 99 MHz
SYS_PLL2_50 49 MHz
SYS_PLL3 25 MHz
UART1 25 MHz
USDHC1 199 MHz
QSPI 399 MHz
42000000: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
42000010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
42000020: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
42000030: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
42000040: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
42000050: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
42000060: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
42000070: 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
42000080: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f
42000090: 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
420000a0: a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af
420000b0: b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
420000c0: c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
420000d0: d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 da db dc dd de df
420000e0: e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 ea eb ec ed ee ef
420000f0: f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
42000100: 00 00 85 7b 00 00 98 5c 00 00 54 91 00 00 e4 40
42000110: 00 01 0c a7 00 01 40 06 42 00 94 99 01 21 47 84
42000120: 00 01 88 05 00 01 09 e4 00 02 bc 2c 01 80 05 c2
42000130: 00 00 14 37 00 11 00 58 00 00 c3 45 00 00 5d 44
42000140: 40 00 4a 15 06 00 9b 90 00 00 96 0a 00 08 f5 81
42000150: 00 08 ab b0 00 00 ee 51 00 00 b1 ac 00 00 7e a0
42000160: 00 00 85 9b 00 00 34 14 00 00 80 82 00 00 11 1b
42000170: 09 10 50 b3 00 00 a8 40 02 00 ce 95 00 00 0c b4
42000180: 00 11 c8 72 08 02 9d 48 00 10 e0 14 00 81 10 65
42000190: 20 20 f8 1c 00 00 55 4d 40 00 0f 00 00 00 13 44
420001a0: 00 00 99 3f 00 00 16 fd 00 00 71 22 00 00 56 24
420001b0: 00 00 c9 50 00 00 af 61 00 00 55 84 00 00 10 9d
420001c0: 41 00 ff 7d 00 00 49 09 80 80 48 93 00 00 b9 50
420001d0: 08 00 84 2d 00 00 f4 10 81 00 b1 cc 00 11 dd 74
420001e0: 00 00 40 77 01 01 0b 4a 01 00 05 18 00 00 02 a5
420001f0: 00 00 f0 51 10 00 48 0d 00 10 10 c4 08 00 07 61
Normal Boot
Trying to boot from MMC1
board_mmc_init: 0
(imx) fsl_esdhc_initialize: 00000000007ee6a8
board_mmc_init: 1
(imx) fsl_esdhc_initialize: 00000000007ee6c0
U-Boot 2018.07 MNT Reform 2023-10-18 (Oct 18 2023 - 20:25:52 +0000)
CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
Reset cause: POR
Model: Boundary Devices i.MX8MQ Nitrogen8M_som
DRAM: 4 GiB
MMC: (imx) fsl_esdhc_probe
(imx) fsl_esdhc_probe
FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: vga
Err: vga
USB0: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 5 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
Net: AR8035 at 4
FEC [PRIME], usb_ether
Autoboot in 1 seconds -- press space key to stop
Device 0: unknown device
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
[18tScanning disk us...@30b40000.blk...
Scanning disk us...@30b50000.blk...
Found 6 disks
219050 bytes read in 26 ms (8 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
## Starting EFI application at 40480000 ...
disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 1.18
|/-\|/boot>
-\|cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd:
/-\|/2861736-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+1091248-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+12711584/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+634544/
[233295-\|/-\|/-\|/-\|/+91+666048-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+260913-\|/-\|/-\|/-\|/]=0x13d5cf8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.4 (RAMDISK) #2131: Sun Oct 8 13:35:40 MDT 2023
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 4248576000 (4051MB)
avail mem = 4036505600 (3849MB)
random: boothowto does not indicate good seed
mainbus0 at root: Boundary Devices i.MX8MQ Nitrogen8M_som
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.7
panic: pmap_pte_insert: invalid cache mode
The operating system has halted.
Please press any key to reboot.
[EOT]
Script done on Wed Dec 6 12:40:36 2023
Script started on Wed Dec 6 13:09:21 2023
Connected to /dev/cuaU0 (speed 115200)
U-Boot SPL 2018.07 MNT Reform 2023-10-18 (Oct 18 2023 - 20:25:52 +0000)
Setting voltages
config to do 3200 1d training.
config to do 667 1d training.
config to do 3200 2d training.
ARM_PLL 1000 MHz
SYS_PLL1_800 799 MHz
SYS_PLL1_400 399 MHz
SYS_PLL1_266 266 MHz
SYS_PLL1_200 199 MHz
SYS_PLL1_160 159 MHz
SYS_PLL1_133 133 MHz
SYS_PLL1_100 99 MHz
SYS_PLL1_80 79 MHz
SYS_PLL1_40 39 MHz
SYS_PLL2_1000 999 MHz
SYS_PLL2_500 499 MHz
SYS_PLL2_333 333 MHz
SYS_PLL2_250 249 MHz
SYS_PLL2_200 199 MHz
SYS_PLL2_166 166 MHz
SYS_PLL2_125 124 MHz
SYS_PLL2_100 99 MHz
SYS_PLL2_50 49 MHz
SYS_PLL3 25 MHz
UART1 25 MHz
USDHC1 199 MHz
QSPI 399 MHz
42000000: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
42000010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
42000020: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
42000030: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
42000040: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
42000050: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
42000060: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
42000070: 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
42000080: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f
42000090: 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
420000a0: a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af
420000b0: b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
420000c0: c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
420000d0: d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 da db dc dd de df
420000e0: e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 ea eb ec ed ee ef
420000f0: f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
42000100: 15 12 85 41 41 2e 98 5c 22 b7 44 91 40 9d e4 44
42000110: 61 21 0c a7 88 51 40 06 70 02 90 99 49 b3 45 84
42000120: 11 09 80 05 52 13 08 64 80 a2 bc 28 05 d0 04 82
42000130: d8 41 00 37 38 15 00 58 1c 92 c3 45 b4 61 00 40
42000140: 48 40 4a 14 56 d0 11 90 34 40 96 0a 1c 1a f5 81
42000150: 99 28 8b b0 3e 13 cc 51 19 8c b1 ac 00 20 7c 20
42000160: 45 09 85 9b 04 02 34 14 08 10 80 82 e0 c7 11 19
42000170: 4d 1e 40 03 00 10 88 40 a3 90 8c 95 94 05 0c b4
42000180: 81 31 c0 72 88 0f 11 48 d0 14 e0 10 85 51 10 25
42000190: 60 30 b8 04 31 5c 15 45 c0 11 0d 00 66 81 03 00
420001a0: a1 10 11 3e 30 23 16 6c 18 0c 71 02 02 44 56 00
420001b0: 10 02 c1 10 84 6a af 60 a4 08 55 8c 02 61 10 9d
420001c0: f1 82 5c 7d 35 81 41 09 90 85 48 93 80 c8 19 40
420001d0: 08 14 80 0c 64 00 d0 10 93 5c a0 cc 21 14 cc 54
420001e0: 42 c6 40 73 41 11 0b 40 99 21 05 18 c1 10 02 25
420001f0: 00 35 a0 51 54 10 08 0d 99 58 18 c4 48 03 04 21
Normal Boot
Trying to boot from MMC1
board_mmc_init: 0
(imx) fsl_esdhc_initialize: 00000000007ee6a8
board_mmc_init: 1
(imx) fsl_esdhc_initialize: 00000000007ee6c0
U-Boot 2018.07 MNT Reform 2023-10-18 (Oct 18 2023 - 20:25:52 +0000)
CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
Reset cause: POR
Model: Boundary Devices i.MX8MQ Nitrogen8M_som
DRAM: 4 GiB
MMC: (imx) fsl_esdhc_probe
(imx) fsl_esdhc_probe
FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: vga
Err: vga
USB0: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 5 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
Net: AR8035 at 4
FEC [PRIME], usb_ether
Autoboot in 1 seconds -- press space key to stop
=> load mmc 1:1 $fdt_addr_r imx8mq-mnt-ro eform2.dtb
35922 bytes read in 19 ms (1.8 MiB/s)
=> load mmc 1:1 $kernel_addr_r efi/boot/bootaa64.efi
219050 bytes read in 38 ms (5.5 MiB/s)
=> boot efi $kernel_addr_r $fdt_addr_r
[18tScanning disk us...@30b40000.blk...
Scanning disk us...@30b50000.blk...
Found 6 disks
## Starting EFI application at 40480000 ...
disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 1.18
|/-\|/boot>
-\|cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd:
/-\|/2861736-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+1091248-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+12711584/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+634544/
[233295-\|/-\|/-\|/-\|/+91+666048-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+260913-\|/-\|/-\|/-\|/]=0x13d5cf8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.4 (RAMDISK) #2131: Sun Oct 8 13:35:40 MDT 2023
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 4248637440 (4051MB)
avail mem = 4081340416 (3892MB)
random: boothowto does not indicate good seed
mainbus0 at root: MNT Reform 2
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x0
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2018.07 MNT Reform 2023-10-18" date 10/18/2023
smbios0: boundary nitrogen8m_som
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
simplefb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0 added (std, vt100 emulation)
"clock-ckil" at mainbus0 not configured
"clock-osc-25m" at mainbus0 not configured
"clock-osc-27m" at mainbus0 not configured
"clock-hdmi-phy-27m" at mainbus0 not configured
"clock-ext1" at mainbus0 not configured
"clock-ext2" at mainbus0 not configured
"clock-ext3" at mainbus0 not configured
"clock-ext4" at mainbus0 not configured
"opp-table" at mainbus0 not configured
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 8333 kHz
simplebus0 at mainbus0: "soc"
agintc0 at simplebus0 shift 4:3 nirq 160 nredist 4: "interrupt-controller"
simplebus1 at simplebus0: "bus"
imxiomuxc0 at simplebus1
syscon0 at simplebus1: "syscon"
"mux-controller" at syscon0 not configured
syscon1 at simplebus1: "efuse"
syscon2 at simplebus1: "syscon"
syscon3 at simplebus1: "snvs"
imxccm0 at simplebus1
imxsrc0 at simplebus1
imxgpio0 at simplebus1
imxgpio1 at simplebus1
imxgpio2 at simplebus1
imxgpio3 at simplebus1
imxgpio4 at simplebus1
"tmu" at simplebus1 not configured
imxdog0 at simplebus1
"dma-controller" at simplebus1 not configured
"lcd-controller" at simplebus1 not configured
imxgpc0 at simplebus1
simplebus2 at simplebus0: "bus"
"pwm" at simplebus2 not configured
"timer" at simplebus2 not configured
simplebus3 at simplebus0: "bus"
imxuart0 at simplebus3: console
imxuart1 at simplebus3
"sai" at simplebus3 not configured
"crypto" at simplebus3 not configured
"mipi-dsi" at simplebus3 not configured
"dphy" at simplebus3 not configured
imxiic0 at simplebus3
iic0 at imxiic0
pcamux0 at iic0 addr 0x70
iic1 at pcamux0
"fcs,fan53555" at iic1 addr 0x60 not configured
iic2 at pcamux0
"fcs,fan53555" at iic2 addr 0x60 not configured
iic3 at pcamux0
"fcs,fan53555" at iic3 addr 0x60 not configured
iic4 at pcamux0
imxiic1 at simplebus3
iic5 at imxiic1
"wlf,wm8960" at iic5 addr 0x1a not configured
pcfrtc0 at iic5 addr 0x68: battery ok
imxiic2 at simplebus3
iic6 at imxiic2
"ti,sn65dsi86" at iic6 addr 0x2c not configured
"mailbox" at simplebus3 not configured
imxesdhc0 at simplebus3
imxesdhc0: 400 MHz base clock
sdmmc0 at imxesdhc0: 8-bit, sd high-speed, mmc high-speed, dma
imxesdhc1 at simplebus3
imxesdhc1: 200 MHz base clock
sdmmc1 at imxesdhc1: 4-bit, sd high-speed, mmc high-speed, dma
"dma-controller" at simplebus3 not configured
fec0 at simplebus3
fec0: address 00:19:b8:08:dd:44
atphy0 at fec0 phy 4: AR8035 10/100/1000 PHY, rev. 2
"interconnect" at simplebus0 not configured
simplebus4 at simplebus0: "bus"
"interrupt-controller" at simplebus4 not configured
"gpu" at simplebus0 not configured
xhci0 at simplebus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
"usb-phy" at simplebus0 not configured
xhci1 at simplebus0, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
"usb-phy" at simplebus0 not configured
"video-codec" at simplebus0 not configured
"video-codec" at simplebus0 not configured
"blk-ctrl" at simplebus0 not configured
"ddr-pmu" at simplebus0 not configured
"regulator-fixed-1v8" at mainbus0 not configured
"regulator-fixed-snvs" at mainbus0 not configured
"backlight" at mainbus0 not configured
"panel" at mainbus0 not configured
"clock-pcie1-refclk" at mainbus0 not configured
"regulator-main-5v" at mainbus0 not configured
"regulator-main-3v3" at mainbus0 not configured
"regulator-main-usb" at mainbus0 not configured
"regulator-main-1v8" at mainbus0 not configured
"regulator-main-1v2" at mainbus0 not configured
"sound" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, TB2916, 0000> removable
sd0: 14952MB, 512 bytes/sector, 30621696 sectors
uhub2 at uhub0 port 1 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 2
uhidev0 at uhub2 port 3 configuration 1 interface 0 "MNT Reform Keyboard" rev
1.10/0.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub2 port 4 configuration 1 interface 0 "MNT Reform Trackball" rev
1.10/0.01 addr 4
uhidev1: iclass 3/1, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhub3 at uhub0 port 2 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 5
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
cpu0: regulator not implemented
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.4 installation program.
WARNING: / was not properly unmounted
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? I
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') mntreform
Available network interfaces are: fec0 vlan0.
Network interface to configure? (name, lladdr, '?', or 'done') [fec0]
IPv4 address for fec0? (or 'autoconf' or 'none') [autoconf]
IPv6 address for fec0? (or 'autoconf' or 'none') [none]
Available network interfaces are: fec0 vlan0.
Network interface to configure? (name, lladdr, '?', or 'done') [done]
Using DNS domainname my.domain
Using DNS nameservers at 192.168.2.1
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no] use asad
Full name for user asad? [asad] Asad L
Password for user asad? (will not echo)
Password for user asad? (again)
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no]
What timezone are you in? ('?' for list) [US/Central]
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0]
Encrypt the root disk with a passphrase? [no]
Disk: sd0 geometry: 1906/255/63 [30621696 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
*0: 0C 2 10 9 - 4 20 16 [ 32768: 32768 ] Win95 FAT32L
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] Unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] Unused
3: A6 4 20 17 - 1906 28 42 [ 65536: 30556160 ] OpenBSD
Use (W)hole disk or (E)dit the MBR? [whole] W
Creating a msdos partition and an OpenBSD partition for rest of sd0...done.
The auto-allocated layout for sd0 is:
# size offset fstype [fsize bsize cpg]
a: 346.9M 65536 4.2BSD 2048 16384 1 # /
b: 473.8M 775968 swap
c: 14952.0M 0 unused
d: 435.0M 1746336 4.2BSD 2048 16384 1 # /tmp
e: 591.9M 2637248 4.2BSD 2048 16384 1 # /var
f: 1893.8M 3849536 4.2BSD 2048 16384 1 # /usr
g: 502.1M 7728032 4.2BSD 2048 16384 1 # /usr/X11R6
h: 1614.7M 8756384 4.2BSD 2048 16384 1 # /usr/local
i: 16.0M 32768 MSDOS
j: 1578.8M 12063264 4.2BSD 2048 16384 1 # /usr/src
k: 5277.5M 15296544 4.2BSD 2048 16384 1 # /usr/obj
l: 2205.5M 26104896 4.2BSD 2048 16384 1 # /home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
newfs: reduced number of fragments per cylinder group from 44400 to 44040 to
enlarge last cylinder group
/dev/rsd0a: 346.9MB in 710432 sectors of 512 bytes
5 cylinder groups of 86.02MB, 5505 blocks, 11072 inodes each
/dev/rsd0l: 2205.5MB in 4516800 sectors of 512 bytes
11 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
newfs: reduced number of fragments per cylinder group from 55680 to 55232 to
enlarge last cylinder group
/dev/rsd0d: 435.0MB in 890912 sectors of 512 bytes
5 cylinder groups of 107.88MB, 6904 blocks, 13824 inodes each
/dev/rsd0f: 1893.8MB in 3878496 sectors of 512 bytes
10 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd0g: 502.1MB in 1028352 sectors of 512 bytes
4 cylinder groups of 125.53MB, 8034 blocks, 16128 inodes each
/dev/rsd0h: 1614.7MB in 3306880 sectors of 512 bytes
8 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd0k: 5277.5MB in 10808352 sectors of 512 bytes
27 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd0j: 1578.8MB in 3233280 sectors of 512 bytes
8 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd0e: 591.9MB in 1212288 sectors of 512 bytes
4 cylinder groups of 147.98MB, 9471 blocks, 18944 inodes each
/dev/sd0a (adbdec914c16e5d5.a) on /mnt type ffs (rw, asynchronous, local)
/dev/sd0l (adbdec914c16e5d5.l) on /mnt/home type ffs (rw, asynchronous, local,
nodev, nosuid)
/dev/sd0d (adbdec914c16e5d5.d) on /mnt/tmp type ffs (rw, asynchronous, local,
nodev, nosuid)
/dev/sd0f (adbdec914c16e5d5.f) on /mnt/usr type ffs (rw, asynchronous, local,
nodev)
/dev/sd0g (adbdec914c16e5d5.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous,
local, nodev)
/dev/sd0h (adbdec914c16e5d5.h) on /mnt/usr/local type ffs (rw, asynchronous,
local, nodev)
/dev/sd0k (adbdec914c16e5d5.k) on /mnt/usr/obj type ffs (rw, asynchronous,
local, nodev, nosuid)
/dev/sd0j (adbdec914c16e5d5.j) on /mnt/usr/src type ffs (rw, asynchronous,
local, nodev, nosuid)
/dev/sd0e (adbdec914c16e5d5.e) on /mnt/var type ffs (rw, asynchronous, local,
nodev, nosuid)
Let's install the sets!
Location of sets? (disk http nfs or 'done') [http]
HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
HTTP Server? (hostname, list#, 'done' or '?') [mirrors.sonic.net]
Server directory? [pub/OpenBSD/7.4/arm64]
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
[X] bsd [X] base74.tgz [X] game74.tgz [X] xfont74.tgz
[X] bsd.mp [X] comp74.tgz [X] xbase74.tgz [X] xserv74.tgz
[X] bsd.rd [X] man74.tgz [X] xshare74.tgz
Set name(s)? (or 'abort' or 'done') [done]
Get/Verify SHA256.sig 0% | | 0 --:-- ETA
Get/Verify SHA256.sig 100% |**************************| 1544 00:00
Signature Verified
Get/Verify bsd 0% | | 0 --:-- ETA
Get/Verify bsd 8% |** | 1408 KB 00:10 ETA
Get/Verify bsd 39% |********** | 6272 KB 00:03 ETA
Get/Verify bsd 74% |******************* | 11904 KB 00:01 ETA
Get/Verify bsd 100% |**************************| 15892 KB 00:03
Get/Verify bsd.mp 0% | | 0 --:-- ETA
Get/Verify bsd.mp 9% |** | 1536 KB 00:09 ETA
Get/Verify bsd.mp 44% |*********** | 7040 KB 00:02 ETA
Get/Verify bsd.mp 94% |************************ | 15104 KB 00:00 ETA
Get/Verify bsd.mp 100% |**************************| 15958 KB 00:03
Get/Verify bsd.rd 0% | | 0 --:-- ETA
Get/Verify bsd.rd 8% |** | 1408 KB 00:11 ETA
Get/Verify bsd.rd 36% |********* | 6400 KB 00:03 ETA
Get/Verify bsd.rd 80% |******************** | 14080 KB 00:00 ETA
Get/Verify bsd.rd 100% |**************************| 17515 KB 00:03
Get/Verify base74.tgz 0% | | 0 --:-- ETA
Get/Verify base74.tgz 0% | | 1408 KB 03:16 ETA
Get/Verify base74.tgz 2% | | 6400 KB 01:24 ETA
Get/Verify base74.tgz 5% |* | 14080 KB 00:55 ETA
Get/Verify base74.tgz 8% |** | 22272 KB 00:45 ETA
Get/Verify base74.tgz 10% |** | 30080 KB 00:40 ETA
Get/Verify base74.tgz 13% |*** | 37888 KB 00:37 ETA
Get/Verify base74.tgz 16% |**** | 45824 KB 00:34 ETA
Get/Verify base74.tgz 19% |**** | 53632 KB 00:33 ETA
Get/Verify base74.tgz 22% |***** | 61696 KB 00:31 ETA
Get/Verify base74.tgz 25% |****** | 69632 KB 00:29 ETA
Get/Verify base74.tgz 28% |******* | 77568 KB 00:27 ETA
Get/Verify base74.tgz 31% |******** | 85376 KB 00:26 ETA
Get/Verify base74.tgz 33% |******** | 93312 KB 00:25 ETA
Get/Verify base74.tgz 36% |********* | 98 MB 00:23 ETA
Get/Verify base74.tgz 39% |********** | 106 MB 00:22 ETA
Get/Verify base74.tgz 42% |********** | 114 MB 00:21 ETA
Get/Verify base74.tgz 45% |*********** | 122 MB 00:20 ETA
Get/Verify base74.tgz 48% |************ | 130 MB 00:19 ETA
Get/Verify base74.tgz 51% |************* | 137 MB 00:18 ETA
Get/Verify base74.tgz 54% |************** | 145 MB 00:16 ETA
Get/Verify base74.tgz 57% |************** | 153 MB 00:15 ETA
Get/Verify base74.tgz 59% |*************** | 160 MB 00:14 ETA
Get/Verify base74.tgz 62% |**************** | 168 MB 00:13 ETA
Get/Verify base74.tgz 65% |**************** | 176 MB 00:12 ETA
Get/Verify base74.tgz 68% |***************** | 183 MB 00:11 ETA
Get/Verify base74.tgz 71% |****************** | 191 MB 00:10 ETA
Get/Verify base74.tgz 74% |******************* | 199 MB 00:09 ETA
Get/Verify base74.tgz 77% |******************** | 206 MB 00:08 ETA
Get/Verify base74.tgz 80% |******************** | 214 MB 00:07 ETA
Get/Verify base74.tgz 82% |********************* | 222 MB 00:06 ETA
Get/Verify base74.tgz 85% |********************** | 230 MB 00:05 ETA
Get/Verify base74.tgz 88% |********************** | 237 MB 00:04 ETA
Get/Verify base74.tgz 91% |*********************** | 245 MB 00:03 ETA
Get/Verify base74.tgz 94% |************************ | 253 MB 00:02 ETA
Get/Verify base74.tgz 97% |************************* | 260 MB 00:00 ETA
Get/Verify base74.tgz 100% |**************************| 268 MB 00:35
Get/Verify comp74.tgz 0% | | 0 --:-- ETA
Get/Verify comp74.tgz 1% | | 1408 KB 00:49 ETA
Get/Verify comp74.tgz 9% |** | 6784 KB 00:18 ETA
Get/Verify comp74.tgz 20% |***** | 14592 KB 00:11 ETA
Get/Verify comp74.tgz 31% |******** | 22528 KB 00:08 ETA
Get/Verify comp74.tgz 43% |*********** | 30464 KB 00:06 ETA
Get/Verify comp74.tgz 54% |************** | 38272 KB 00:05 ETA
Get/Verify comp74.tgz 65% |**************** | 46208 KB 00:03 ETA
Get/Verify comp74.tgz 76% |******************* | 54144 KB 00:02 ETA
Get/Verify comp74.tgz 87% |********************** | 61952 KB 00:01 ETA
Get/Verify comp74.tgz 99% |************************* | 70016 KB 00:00 ETA
Get/Verify comp74.tgz 100% |**************************| 70715 KB 00:10
Get/Verify man74.tgz 0% | | 0 --:-- ETA
Get/Verify man74.tgz 16% |**** | 1280 KB 00:05 ETA
Get/Verify man74.tgz 84% |********************* | 6656 KB 00:00 ETA
Get/Verify man74.tgz 100% |**************************| 7831 KB 00:02
Get/Verify game74.tgz 0% | | 0 --:-- ETA
Get/Verify game74.tgz 61% |*************** | 1664 KB 00:00 ETA
Get/Verify game74.tgz 100% |**************************| 2720 KB 00:01
Get/Verify xbase74.tgz 0% | | 0 --:-- ETA
Get/Verify xbase74.tgz 2% | | 1408 KB 00:33 ETA
Get/Verify xbase74.tgz 12% |*** | 6272 KB 00:13 ETA
Get/Verify xbase74.tgz 22% |***** | 11136 KB 00:10 ETA
Get/Verify xbase74.tgz 38% |********* | 18944 KB 00:06 ETA
Get/Verify xbase74.tgz 55% |************** | 27008 KB 00:04 ETA
Get/Verify xbase74.tgz 71% |****************** | 34816 KB 00:02 ETA
Get/Verify xbase74.tgz 87% |********************** | 42752 KB 00:01 ETA
Get/Verify xbase74.tgz 100% |**************************| 48890 KB 00:07
Get/Verify xshare74.tgz 0% | | 0 --:-- ETA
Get/Verify xshare74.tgz 30% |******* | 1408 KB 00:02 ETA
Get/Verify xshare74.tgz 100% |**************************| 4579 KB 00:01
Get/Verify xfont74.tgz 0% | | 0 --:-- ETA
Get/Verify xfont74.tgz 4% |* | 1024 KB 00:21 ETA
Get/Verify xfont74.tgz 23% |***** | 5376 KB 00:06 ETA
Get/Verify xfont74.tgz 56% |************** | 12928 KB 00:02 ETA
Get/Verify xfont74.tgz 91% |*********************** | 20992 KB 00:00 ETA
Get/Verify xfont74.tgz 100% |**************************| 22968 KB 00:04
Get/Verify xserv74.tgz 0% | | 0 --:-- ETA
Get/Verify xserv74.tgz 13% |*** | 1408 KB 00:06 ETA
Get/Verify xserv74.tgz 61% |*************** | 6528 KB 00:01 ETA
Get/Verify xserv74.tgz 100% |**************************| 10571 KB 00:02
Installing bsd 0% | | 0 --:-- ETA
Installing bsd 60% |*************** | 9600 KB 00:00 ETA
Installing bsd 100% |**************************| 15892 KB 00:01
Installing bsd.mp 0% | | 0 --:-- ETA
Installing bsd.mp 56% |************** | 8960 KB 00:00 ETA
Installing bsd.mp 100% |**************************| 15958 KB 00:01
Installing bsd.rd 0% | | 0 --:-- ETA
Installing bsd.rd 46% |*********** | 8192 KB 00:01 ETA
Installing bsd.rd 100% |**************************| 17515 KB 00:01
Installing base74.tgz 0% | | 0 --:-- ETA
Installing base74.tgz 0% | | 2176 KB 02:06 ETA
Installing base74.tgz 1% | | 3200 KB 02:50 ETA
Installing base74.tgz 2% | | 6272 KB 02:08 ETA
Installing base74.tgz 3% | | 9344 KB 01:53 ETA
Installing base74.tgz 4% |* | 13696 KB 01:35 ETA
Installing base74.tgz 6% |* | 18048 KB 01:25 ETA
Installing base74.tgz 7% |* | 19584 KB 01:31 ETA
Installing base74.tgz 7% |* | 21760 KB 01:33 ETA
Installing base74.tgz 8% |** | 24448 KB 01:32 ETA
Installing base74.tgz 10% |** | 27648 KB 01:29 ETA
Installing base74.tgz 11% |** | 30720 KB 01:27 ETA
Installing base74.tgz 12% |*** | 34688 KB 01:23 ETA
Installing base74.tgz 13% |*** | 38400 KB 01:20 ETA
Installing base74.tgz 15% |*** | 42112 KB 01:17 ETA
Installing base74.tgz 16% |**** | 44800 KB 01:17 ETA
Installing base74.tgz 16% |**** | 45568 KB 01:20 ETA
Installing base74.tgz 17% |**** | 47616 KB 01:21 ETA
Installing base74.tgz 18% |**** | 50944 KB 01:19 ETA
Installing base74.tgz 20% |***** | 55040 KB 01:15 ETA
Installing base74.tgz 21% |***** | 59136 KB 01:12 ETA
Installing base74.tgz 22% |***** | 62464 KB 01:11 ETA
Installing base74.tgz 24% |****** | 66560 KB 01:08 ETA
Installing base74.tgz 25% |****** | 69888 KB 01:07 ETA
Installing base74.tgz 26% |****** | 72064 KB 01:07 ETA
Installing base74.tgz 26% |****** | 73216 KB 01:08 ETA
Installing base74.tgz 28% |******* | 77184 KB 01:06 ETA
Installing base74.tgz 29% |******* | 80768 KB 01:04 ETA
Installing base74.tgz 30% |******* | 84864 KB 01:02 ETA
Installing base74.tgz 32% |******** | 88576 KB 01:00 ETA
Installing base74.tgz 33% |******** | 91648 KB 00:59 ETA
Installing base74.tgz 34% |******** | 94080 KB 00:59 ETA
Installing base74.tgz 34% |******** | 96000 KB 00:59 ETA
Installing base74.tgz 35% |********* | 97920 KB 00:59 ETA
Installing base74.tgz 36% |********* | 98 MB 00:58 ETA
Installing base74.tgz 37% |********* | 100 MB 00:58 ETA
Installing base74.tgz 39% |********** | 104 MB 00:56 ETA
Installing base74.tgz 40% |********** | 108 MB 00:54 ETA
Installing base74.tgz 41% |********** | 112 MB 00:52 ETA
Installing base74.tgz 45% |*********** | 120 MB 00:47 ETA
Installing base74.tgz 48% |************ | 128 MB 00:43 ETA
Installing base74.tgz 51% |************* | 137 MB 00:39 ETA
Installing base74.tgz 53% |************* | 144 MB 00:35 ETA
Installing base74.tgz 56% |************** | 151 MB 00:33 ETA
Installing base74.tgz 58% |*************** | 157 MB 00:31 ETA
Installing base74.tgz 61% |*************** | 166 MB 00:27 ETA
Installing base74.tgz 64% |**************** | 172 MB 00:25 ETA
Installing base74.tgz 67% |***************** | 181 MB 00:22 ETA
Installing base74.tgz 71% |****************** | 190 MB 00:19 ETA
Installing base74.tgz 73% |****************** | 198 MB 00:17 ETA
Installing base74.tgz 77% |******************** | 207 MB 00:14 ETA
Installing base74.tgz 79% |******************** | 214 MB 00:12 ETA
Installing base74.tgz 83% |********************* | 222 MB 00:10 ETA
Installing base74.tgz 85% |********************** | 230 MB 00:08 ETA
Installing base74.tgz 89% |*********************** | 238 MB 00:06 ETA
Installing base74.tgz 92% |*********************** | 247 MB 00:04 ETA
Installing base74.tgz 95% |************************ | 256 MB 00:02 ETA
Installing base74.tgz 97% |************************* | 261 MB 00:01 ETA
Installing base74.tgz 98% |************************* | 264 MB 00:00 ETA
Installing base74.tgz 99% |************************* | 266 MB 00:00 ETA
Installing base74.tgz 99% |************************* | 267 MB 00:00 ETA
Installing base74.tgz 100% |**************************| 268 MB 01:00
Extracting etc.tgz 0% | | 0 --:-- ETA
Extracting etc.tgz 100% |**************************| 257 KB 00:00
Installing comp74.tgz 0% | | 0 --:-- ETA
Installing comp74.tgz 1% | | 1152 KB 01:00 ETA
Installing comp74.tgz 3% | | 2560 KB 00:53 ETA
Installing comp74.tgz 5% |* | 3968 KB 00:50 ETA
Installing comp74.tgz 7% |* | 5248 KB 00:49 ETA
Installing comp74.tgz 9% |** | 7040 KB 00:45 ETA
Installing comp74.tgz 11% |** | 7808 KB 00:48 ETA
Installing comp74.tgz 13% |*** | 9728 KB 00:43 ETA
Installing comp74.tgz 17% |**** | 12160 KB 00:38 ETA
Installing comp74.tgz 20% |***** | 14208 KB 00:35 ETA
Installing comp74.tgz 23% |***** | 16896 KB 00:31 ETA
Installing comp74.tgz 27% |******* | 19456 KB 00:28 ETA
Installing comp74.tgz 30% |******* | 21632 KB 00:27 ETA
Installing comp74.tgz 34% |******** | 24192 KB 00:25 ETA
Installing comp74.tgz 37% |********* | 26496 KB 00:23 ETA
Installing comp74.tgz 41% |********** | 29184 KB 00:21 ETA
Installing comp74.tgz 44% |*********** | 31360 KB 00:20 ETA
Installing comp74.tgz 47% |************ | 33664 KB 00:18 ETA
Installing comp74.tgz 52% |************* | 37248 KB 00:16 ETA
Installing comp74.tgz 57% |************** | 40704 KB 00:14 ETA
Installing comp74.tgz 62% |**************** | 44544 KB 00:11 ETA
Installing comp74.tgz 65% |**************** | 46464 KB 00:10 ETA
Installing comp74.tgz 70% |****************** | 49664 KB 00:09 ETA
Installing comp74.tgz 75% |******************* | 53120 KB 00:07 ETA
Installing comp74.tgz 80% |******************** | 56960 KB 00:05 ETA
Installing comp74.tgz 85% |********************** | 60416 KB 00:04 ETA
Installing comp74.tgz 87% |********************** | 62208 KB 00:03 ETA
Installing comp74.tgz 90% |*********************** | 64128 KB 00:02 ETA
Installing comp74.tgz 93% |************************ | 66432 KB 00:01 ETA
Installing comp74.tgz 96% |************************ | 67968 KB 00:01 ETA
Installing comp74.tgz 96% |************************ | 67968 KB 00:01 ETA
Installing comp74.tgz 96% |************************ | 68480 KB 00:01 ETA
Installing comp74.tgz 96% |************************ | 68480 KB 00:01 ETA
Installing comp74.tgz 97% |************************* | 69248 KB 00:00 ETA
Installing comp74.tgz 100% |**************************| 70715 KB 00:33
Installing man74.tgz 0% | | 0 --:-- ETA
Installing man74.tgz 45% |*********** | 3584 KB 00:01 ETA
Installing man74.tgz 76% |******************* | 6016 KB 00:00 ETA
Installing man74.tgz 83% |********************* | 6528 KB 00:00 ETA
Installing man74.tgz 89% |*********************** | 7040 KB 00:00 ETA
Installing man74.tgz 91% |*********************** | 7168 KB 00:00 ETA
Installing man74.tgz 100% |**************************| 7831 KB 00:05
Installing game74.tgz 0% | | 0 --:-- ETA
Installing game74.tgz 100% |**************************| 2720 KB 00:00
Installing xbase74.tgz 0% | | 0 --:-- ETA
Installing xbase74.tgz 5% |* | 2560 KB 00:18 ETA
Installing xbase74.tgz 12% |*** | 5888 KB 00:14 ETA
Installing xbase74.tgz 15% |*** | 7424 KB 00:16 ETA
Installing xbase74.tgz 20% |***** | 9984 KB 00:15 ETA
Installing xbase74.tgz 30% |******* | 14848 KB 00:11 ETA
Installing xbase74.tgz 39% |********** | 19328 KB 00:09 ETA
Installing xbase74.tgz 47% |************ | 23168 KB 00:07 ETA
Installing xbase74.tgz 52% |************* | 25472 KB 00:07 ETA
Installing xbase74.tgz 58% |*************** | 28800 KB 00:06 ETA
Installing xbase74.tgz 64% |**************** | 31360 KB 00:05 ETA
Installing xbase74.tgz 69% |***************** | 34048 KB 00:04 ETA
Installing xbase74.tgz 74% |******************* | 36608 KB 00:04 ETA
Installing xbase74.tgz 79% |******************** | 38784 KB 00:03 ETA
Installing xbase74.tgz 84% |********************* | 41472 KB 00:02 ETA
Installing xbase74.tgz 88% |********************** | 43392 KB 00:01 ETA
Installing xbase74.tgz 92% |*********************** | 45184 KB 00:01 ETA
Installing xbase74.tgz 97% |************************* | 47872 KB 00:00 ETA
Installing xbase74.tgz 100% |**************************| 48890 KB 00:17
Extracting xetc.tgz 0% | | 0 --:-- ETA
Extracting xetc.tgz 100% |**************************| 7282 00:00
Installing xshare74.tgz 0% | | 0 --:-- ETA
Installing xshare74.tgz 36% |********* | 1664 KB 00:01 ETA
Installing xshare74.tgz 39% |********** | 1792 KB 00:03 ETA
Installing xshare74.tgz 44% |*********** | 2048 KB 00:03 ETA
Installing xshare74.tgz 44% |*********** | 2048 KB 00:04 ETA
Installing xshare74.tgz 64% |**************** | 2944 KB 00:02 ETA
Installing xshare74.tgz 100% |**************************| 4579 KB 00:05
Installing xfont74.tgz 0% | | 0 --:-- ETA
Installing xfont74.tgz 33% |******** | 7808 KB 00:01 ETA
Installing xfont74.tgz 38% |********* | 8832 KB 00:03 ETA
Installing xfont74.tgz 38% |********* | 8832 KB 00:04 ETA
Installing xfont74.tgz 47% |************ | 11008 KB 00:04 ETA
Installing xfont74.tgz 68% |***************** | 15744 KB 00:02 ETA
Installing xfont74.tgz 100% |**************************| 22968 KB 00:05
Installing xserv74.tgz 0% | | 0 --:-- ETA
Installing xserv74.tgz 38% |********* | 4096 KB 00:01 ETA
Installing xserv74.tgz 55% |************** | 5888 KB 00:01 ETA
Installing xserv74.tgz 92% |*********************** | 9728 KB 00:00 ETA
Installing xserv74.tgz 100% |**************************| 10571 KB 00:03
Location of sets? (disk http nfs or 'done') [done]
Saving configuration files... done.
Making all device nodes... done.
Multiprocessor machine; using bsd.mp instead of bsd.
fw_update: add none; update none
Relinking to create unique kernel... done.
CONGRATULATIONS! Your OpenBSD install has been successfully completed!
When you login to your new system the first time, please read your mail
using the 'mail' command.
Exit to (S)hell, (H)alt or (R)eboot? [reboot]
[EOT]
Script done on Wed Dec 6 13:18:04 2023
OpenBSD 7.4 (GENERIC.MP) #2273: Tue Oct 10 09:45:06 MDT 2023
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 4248616960 (4051MB)
avail mem = 4081438720 (3892MB)
random: good seed from bootblocks
mainbus0 at root: MNT Reform 2
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x0
smbios0 at efi0: SMBIOS 3.0
smbios0: vendor U-Boot version "2018.07 MNT Reform 2023-10-18" date 10/18/2023
smbios0: boundary nitrogen8m_som
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 1024KB 64b/line 16-way L2 cache
cpu1: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 1024KB 64b/line 16-way L2 cache
cpu2: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 1024KB 64b/line 16-way L2 cache
cpu3: CRC32,SHA2,SHA1,AES+PMULL,ASID16
apm0 at mainbus0
simplefb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
"clock-ckil" at mainbus0 not configured
"clock-osc-25m" at mainbus0 not configured
"clock-osc-27m" at mainbus0 not configured
"clock-hdmi-phy-27m" at mainbus0 not configured
"clock-ext1" at mainbus0 not configured
"clock-ext2" at mainbus0 not configured
"clock-ext3" at mainbus0 not configured
"clock-ext4" at mainbus0 not configured
"opp-table" at mainbus0 not configured
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 8333 kHz
simplebus0 at mainbus0: "soc"
agintc0 at simplebus0 shift 4:3 nirq 160 nredist 4 ipi: 0, 1, 2:
"interrupt-controller"
simplebus1 at simplebus0: "bus"
imxiomuxc0 at simplebus1
syscon0 at simplebus1: "syscon"
"mux-controller" at syscon0 not configured
syscon1 at simplebus1: "efuse"
syscon2 at simplebus1: "syscon"
syscon3 at simplebus1: "snvs"
imxccm0 at simplebus1
imxsrc0 at simplebus1
imxgpio0 at simplebus1
imxgpio1 at simplebus1
imxgpio2 at simplebus1
imxgpio3 at simplebus1
imxgpio4 at simplebus1
imxtmu0 at simplebus1
imxdog0 at simplebus1
"dma-controller" at simplebus1 not configured
"lcd-controller" at simplebus1 not configured
imxgpc0 at simplebus1
simplebus2 at simplebus0: "bus"
imxpwm0 at simplebus2
"timer" at simplebus2 not configured
simplebus3 at simplebus0: "bus"
imxuart0 at simplebus3: console
imxuart1 at simplebus3
"sai" at simplebus3 not configured
"crypto" at simplebus3 not configured
"mipi-dsi" at simplebus3 not configured
"dphy" at simplebus3 not configured
imxiic0 at simplebus3
iic0 at imxiic0
pcamux0 at iic0 addr 0x70
iic1 at pcamux0
fanpwr0 at iic1 addr 0x60: FAN53555, 1.00 VDC
iic2 at pcamux0
fanpwr1 at iic2 addr 0x60: FAN53555, 1.10 VDC
iic3 at pcamux0
fanpwr2 at iic3 addr 0x60: FAN53555, 0.90 VDC
iic4 at pcamux0
imxiic1 at simplebus3
iic5 at imxiic1
"wlf,wm8960" at iic5 addr 0x1a not configured
pcfrtc0 at iic5 addr 0x68: battery ok
imxiic2 at simplebus3
iic6 at imxiic2
"ti,sn65dsi86" at iic6 addr 0x2c not configured
"mailbox" at simplebus3 not configured
imxesdhc0 at simplebus3
imxesdhc0: 400 MHz base clock
sdmmc0 at imxesdhc0: 8-bit, sd high-speed, mmc high-speed, dma
imxesdhc1 at simplebus3
imxesdhc1: 200 MHz base clock
sdmmc1 at imxesdhc1: 4-bit, sd high-speed, mmc high-speed, dma
"dma-controller" at simplebus3 not configured
fec0 at simplebus3
fec0: address 00:19:b8:08:dd:44
atphy0 at fec0 phy 4: AR8035 10/100/1000 PHY, rev. 2
"interconnect" at simplebus0 not configured
simplebus4 at simplebus0: "bus"
"interrupt-controller" at simplebus4 not configured
"gpu" at simplebus0 not configured
xhci0 at simplebus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
"usb-phy" at simplebus0 not configured
xhci1 at simplebus0, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00
addr 1
"usb-phy" at simplebus0 not configured
"video-codec" at simplebus0 not configured
"video-codec" at simplebus0 not configured
"blk-ctrl" at simplebus0 not configured
"ddr-pmu" at simplebus0 not configured
"regulator-fixed-1v8" at mainbus0 not configured
"regulator-fixed-snvs" at mainbus0 not configured
pwmbl0 at mainbus0
simplepanel0 at mainbus0
"clock-pcie1-refclk" at mainbus0 not configured
"regulator-main-5v" at mainbus0 not configured
"regulator-main-3v3" at mainbus0 not configured
"regulator-main-usb" at mainbus0 not configured
"regulator-main-1v8" at mainbus0 not configured
"regulator-main-1v2" at mainbus0 not configured
"sound" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, TB2916, 0000> removable
sd0: 14952MB, 512 bytes/sector, 30621696 sectors
uhub2 at uhub0 port 1 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 2
uhidev0 at uhub2 port 3 configuration 1 interface 0 "MNT Reform Keyboard" rev
1.10/0.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub2 port 4 configuration 1 interface 0 "MNT Reform Trackball" rev
1.10/0.01 addr 4
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=0, output=0, feature=1
uhub3 at uhub0 port 2 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 5
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (adbdec914c16e5d5.a) swap on sd0b dump on sd0b
Controller /dev/usb0:
addr 01: 0000:0000 Generic, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
addr 02: 0451:8142 Texas Instruments, product 0x8142
high speed, self powered, config 1, rev 1.00, iSerial 2E0800596538
driver: uhub2
addr 03: 03eb:2042 MNT, Reform Keyboard
full speed, power 100 mA, config 1, rev 0.01
driver: uhidev0
addr 04: 03eb:2041 MNT, Reform Trackball
full speed, power 100 mA, config 1, rev 0.01
driver: uhidev1
addr 05: 0451:8140 Texas Instruments, product 0x8140
super speed, self powered, config 1, rev 1.00
driver: uhub3
Controller /dev/usb1:
addr 01: 0000:0000 Generic, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub1
Script started on Wed Dec 6 13:28:24 2023
Connected to /dev/cuaU0 (speed 115200)
U-Boot SPL 2018.07 MNT Reform 2023-10-18 (Oct 18 2023 - 20:25:52 +0000)
Setting voltages
config to do 3200 1d training.
config to do 667 1d training.
config to do 3200 2d training.
ARM_PLL 1000 MHz
SYS_PLL1_800 799 MHz
SYS_PLL1_400 399 MHz
SYS_PLL1_266 266 MHz
SYS_PLL1_200 199 MHz
SYS_PLL1_160 159 MHz
SYS_PLL1_133 133 MHz
SYS_PLL1_100 99 MHz
SYS_PLL1_80 79 MHz
SYS_PLL1_40 39 MHz
SYS_PLL2_1000 999 MHz
SYS_PLL2_500 499 MHz
SYS_PLL2_333 333 MHz
SYS_PLL2_250 249 MHz
SYS_PLL2_200 199 MHz
SYS_PLL2_166 166 MHz
SYS_PLL2_125 124 MHz
SYS_PLL2_100 99 MHz
SYS_PLL2_50 49 MHz
SYS_PLL3 25 MHz
UART1 25 MHz
USDHC1 199 MHz
QSPI 399 MHz
42000000: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
42000010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
42000020: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
42000030: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
42000040: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
42000050: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
42000060: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
42000070: 70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
42000080: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f
42000090: 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
420000a0: a0 a1 a2 a3 a4 a5 a6 a7 a8 a9 aa ab ac ad ae af
420000b0: b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
420000c0: c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
420000d0: d0 d1 d2 d3 d4 d5 d6 d7 d8 d9 da db dc dd de df
420000e0: e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 ea eb ec ed ee ef
420000f0: f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd fe ff
42000100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
42000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
42000120: 00 01 00 00 00 00 00 00 00 00 00 00 00 80 00 02
42000130: 00 00 00 04 00 11 00 00 00 00 00 00 00 00 00 00
42000140: 40 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
42000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
42000160: 00 00 00 08 00 00 00 10 00 00 00 00 00 00 00 00
42000170: 00 10 00 00 00 08 00 00 00 00 00 00 00 00 00 00
42000180: 00 09 00 00 00 00 10 00 00 10 00 00 00 01 80 00
42000190: 00 00 00 00 00 00 00 00 40 00 00 00 02 00 00 00
420001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00
420001b0: 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00
420001c0: 01 00 00 00 00 00 00 00 00 00 08 00 00 00 10 00
420001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420001e0: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
420001f0: 00 00 00 00 10 00 00 00 00 10 00 00 08 08 00 00
Normal Boot
Trying to boot from MMC1
board_mmc_init: 0
(imx) fsl_esdhc_initialize: 00000000007ee6a8
board_mmc_init: 1
(imx) fsl_esdhc_initialize: 00000000007ee6c0
U-Boot 2018.07 MNT Reform 2023-10-18 (Oct 18 2023 - 20:25:52 +0000)
CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
Reset cause: POR
Model: Boundary Devices i.MX8MQ Nitrogen8M_som
DRAM: 4 GiB
MMC: (imx) fsl_esdhc_probe
(imx) fsl_esdhc_probe
FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: vga
Err: vga
USB0: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 5 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
Net: AR8035 at 4
FEC [PRIME], usb_ether
Autoboot in 1 seconds -- press space key to stop
Device 0: unknown device
Card did not respond to voltage select!
mmc_init: -95, time 38
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
[18tScanning disk us...@30b40000.blk...
Card did not respond to voltage select!
mmc_init: -95, time 36
Scanning disk us...@30b50000.blk...
Disk us...@30b50000.blk not ready
Found 3 disks
219050 bytes read in 17 ms (12.3 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
## Starting EFI application at 40480000 ...
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 1.18
|/-\|/-\|/boot>
-\|/-\|/-\booting sd0a:/bsd:
|/-\|/10669340-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+2522640\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+298944\|/-\|/-\|/-\|/-\+850640|
[801197/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+91+1219896\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+730952/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/]=0x13b8c20
[ using 2752912 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.4 (GENERIC.MP) #0: Sun Oct 22 12:11:05 MDT 2023
r...@syspatch-74-arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 4248588288 (4051MB)
avail mem = 4036628480 (3849MB)
random: good seed from bootblocks
mainbus0 at root: Boundary Devices i.MX8MQ Nitrogen8M_som
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.7
panic: pmap_pte_insert: invalid cache mode
Stopped at panic+0x164: cmp w21, #0x0
TID PID UID PRFLAGS PFLAGS CPU COMMAND
* 0 0 0 0x10000 0x200 0K swapper
db_enter() at panic+0x160
panic() at pmap_pte_insert+0x12c
pmap_remove() at pmap_enter+0x3e4
pmap_enter() at efi_map_runtime+0x140
efi_map_runtime() at efi_attach+0x138
efi_attach() at config_attach+0x218
config_attach() at mainbus_attach+0x1d0
https://www.openbsd.org/ddb.html describes the minimum info required in bug
reports. Insufficient info makes it difficult to find and fix bugs.
ddb{0}> lo ps
PID TID PPID UID S FLAGS WAIT COMMAND
* 0 0 -1 0 7 0x10200 swapper
ddb{0}> trace
db_enter() at panic+0x160
panic() at pmap_pte_insert+0x12c
pmap_remove() at pmap_enter+0x3e4
pmap_enter() at efi_map_runtime+0x140
efi_map_runtime() at efi_attach+0x138
efi_attach() at config_attach+0x218
config_attach() at mainbus_attach+0x1d0
mainbus_attach() at config_attach+0x218
config_attach() at cpu_configure+0x30
cpu_configure() at main+0x320
main() at virtdone+0x70
ddb{0}> boot dump
rebooting...
[EOT]
Script done on Wed Dec 6 13:34:49 2023
