Hello,
Apologies if line output is terrible. I only have access to gmail
right now, and I used a text editor to wrap to 72char as best I
could.
I am able to successfully run and install using a USB with
install72.img using all defaults including disk layout. When
dropping to shell, all hardware appears to work well, as best as I can tell.
After rebooting, it hangs here, manually transferred from screen:
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns8250, no fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd8 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppie at isal port 0x61
spkre at pcppi0 UMMO at mainbus0: VMX/EPT
efifb at mainbus0 not configured
Same results were obtained whether on 7.2 RELEASE or CURRENT using
Feb 27 snapshot. Also tried changing console default to com0 since
it's the eventual plan, and it still hung
Attempting boot -c (to attempt disabling inteldrm), -d all end up in
an unresponsive prompt which limits (my) ability to troubleshoot.
Googling found nothing directly aligned to this, but oddly brought up
many posts about inteldrm, so I booted into bsd.rd and modified the
kernel to remove inteldrm and I made some more progress, but it still
stopped here:
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using
wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Below is the complete dmesg obtained from booting with the install
img. If anything else is needed, let me know and I'll do my best to
access the info desired
OpenBSD 7.2 (RAMDISK_CD) #725: Tue Sep 27 12:02:48 MDT 2022
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8431804416 (8041MB)
avail mem = 8172244992 (7793MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x99ba3000 (94 entries)
bios0: vendor American Megatrends Inc. version "D8280A02" date 02/17/2021
bios0: MiTAC PH11CMI
acpi0 at bios0: ACPI 6.2
acpi0: tables DSDT FACP MCFG SSDT FIDT SSDT HPET SSDT SSDT SSDT NHLT
LPIT SSDT SSDT DBGP DBG2 SSDT BGRT DMAR WSMT APIC FPDT
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-10100 CPU @ 3.60GHz, 3591.63 MHz, 06-a5-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB
64b/line 4-way L2 cache, 6MB 64b/line 12-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus 1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiprt12 at acpi0: bus -1 (RP09)
acpiprt13 at acpi0: bus -1 (RP10)
acpiprt14 at acpi0: bus -1 (RP11)
acpiprt15 at acpi0: bus 2 (RP12)
acpiprt16 at acpi0: bus -1 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpiprt24 at acpi0: bus -1 (RP21)
acpiprt25 at acpi0: bus -1 (RP22)
acpiprt26 at acpi0: bus -1 (RP23)
acpiprt27 at acpi0: bus -1 (RP24)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
"INT3451" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"ACPI000E" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 10G Host" rev 0x03
"Intel UHD Graphics 630" rev 0x03 at pci0 dev 2 function 0 not configured
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 400 Series xHCI" rev 0x00: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 400 Series Thermal" rev 0x00 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel 400 Series I2C" rev 0x00: apic 2 int 16
iic0 at dwiic0
dwiic1 at pci0 dev 21 function 1 "Intel 400 Series I2C" rev 0x00: apic 2 int 17
iic1 at dwiic1
"Intel 400 Series HECI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 400 Series AHCI" rev 0x00: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus0 at ahci0: 32 targets
ppb0 at pci0 dev 28 function 0 "Intel 400 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 unknown vendor 0x1e4b product 0x1202
rev 0x01: msix, NVMe 1.4
nvme0: Patriot M.2 P310 240GB, firmware H220902a, serial P310ADBB2212094892
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, Patriot M.2 P310, H220>
sd0: 228936MB, 512 bytes/sector, 468862128 sectors
ppb1 at pci0 dev 29 function 0 "Intel 400 Series PCIE" rev 0xf0: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address
4c:38:d5:12:ee:7e
"Intel H410 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
"Intel 400 Series PMC" rev 0x00 at pci0 dev 31 function 2 not configured
"Intel 400 Series SMBus" rev 0x00 at pci0 dev 31 function 4 not configured
em1 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address
4c:38:d5:12:ee:7d
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns8250, no fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 1280x2160, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
umass0 at uhub0 port 5 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP>
removable serial.09306545ED2059340F59
sd1: 14887MB, 512 bytes/sector, 30489408 sectors
uhidev0 at uhub0 port 7 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 7 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.01 addr 3
uhidev1: iclass 3/1, 8 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 8 not configured
uhidev2 at uhub0 port 7 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.01 addr 3
uhidev2: iclass 3/0, 33 report ids
uhid at uhidev2 reportid 16 not configured
uhid at uhidev2 reportid 17 not configured
uhid at uhidev2 reportid 32 not configured
uhid at uhidev2 reportid 33 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
