On Sat, Feb 11, 2023 at 01:30:22PM -0600, Brian Conway wrote: > Greetings. I'm testing a new AliExpress (unbranded) mini PC based on Intel > Jasper Lake on the latest -current, running headless over serial console. All > devices of note seem to be detected and run well (AHCI, NVME, I226-V > ethernet), but one CPU is pegged at 100%. The only notable process doing > anything on an otherwise idle system is `acpi0`, along with a high interrupt > rate. Outputs of top, vmstat (x2), dmesg, and pcidump follow, and acpidump is > attached. > > Please let me know if there's anything else I can provide. Thanks. > > Brian >
Since I've seen a bunch of reports of this family of machines causing the 6f GPE spin, I went out and bought two different ones, random different brands. Neither of them exhibit this issue. Both of them have identical dmesg to yours, EXCEPT they are using original AMI bios and not "Techvision LLC". I'd suspect that your vendor is using bios that doesn't match the SoC or has otherwise misconfigured something. Everything else in the dmesg (except for obvious things like the igc MAC addresses and the brand of SSD/etc) matches up nearly identically. The only outlier is the bios brand/version. This is a pretty cheap SoC, and I'm not surprised that the quality of these is somewhat ... suspect. -ml > # top -bIS > load averages: 0.93, 0.84, 0.48 rtest.int.rcesoftware.com 19:21:17 > 91 processes: 87 idle, 4 on processor up 0 days 00:09:44 > CPU0 states: 0.0% user, 0.0% nice, 15.5% sys, 0.6% spin, 76.3% intr, 7.6% > idle > CPU1 states: 0.3% user, 0.0% nice, 0.3% sys, 0.5% spin, 0.0% intr, 98.9% > idle > CPU2 states: 0.2% user, 0.0% nice, 0.4% sys, 0.6% spin, 0.0% intr, 98.8% > idle > CPU3 states: 0.1% user, 0.0% nice, 0.2% sys, 0.3% spin, 0.0% intr, 99.4% > idle > Memory: Real: 121M/459M act/tot Free: 7308M Cache: 231M Swap: 0K/0K > > PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND > 34802 root 34 0 0K 2096K onproc/0 - 1:33 15.58% acpi0 > > # vmstat -c 5 > > procs memory page disks traps cpu > r s avm fre flt re pi po fr sr sd0 sd1 int sys cs us sy id > 2 87 121M 7308M 518 0 0 0 0 0 0 0 9217 595 18596 0 24 > 76 > 0 87 121M 7308M 11 0 0 0 0 0 0 0 9251 30 18533 0 22 > 78 > 0 87 121M 7308M 7 0 0 0 0 0 0 0 9320 19 18666 0 24 > 76 > 0 87 121M 7308M 7 0 0 0 0 0 0 0 9318 19 18666 0 22 > 78 > 0 87 121M 7308M 7 0 0 0 0 0 0 0 9325 19 18676 0 25 > 75 > > # vmstat -i > > interrupt total rate > irq144/com0 557 0 > irq96/acpi0 5659949 9173 > irq145/inteldrm0 178 0 > irq97/xhci0 20227 32 > irq98/ahci0 14 0 > irq100/nvme0 13 0 > irq114/igc0:0 3212 5 > irq115/igc0:1 349 0 > irq116/igc0:2 360 0 > irq117/igc0:3 1329 2 > irq118/igc0 2 0 > irq0/clock 492346 797 > irq0/ipi 8974 14 > Total 6187510 10028 > > dmesg: > > OpenBSD 7.2-current (GENERIC.MP) #1031: Fri Feb 10 21:22:48 MST 2023 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8410243072 (8020MB) > avail mem = 8135966720 (7759MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x78d77000 (116 entries) > bios0: vendor Techvision, LLC. version "5.19" date 11/08/2022 > bios0: Techvision TVI7309X > efi0 at bios0: UEFI 2.7 > efi0: American Megatrends rev 0x50013 > acpi0 at bios0: ACPI 6.2 > acpi0: sleep states S0 S3 S5 > acpi0: tables DSDT FACP MCFG FIDT SSDT SSDT SSDT HPET APIC PRAM SSDT SSDT > NHLT LPIT SSDT SSDT DBGP DBG2 SSDT DMAR SSDT TPM2 WSMT FPDT > acpi0: wakeup devices PEGP(S3) PEGP(S3) PEGP(S3) PEGP(S3) SIO1(S3) RP01(S3) > PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3) PXSX(S3) RP05(S3) > PXSX(S3) RP06(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimcfg0 at acpi0 > acpimcfg0: addr 0xc0000000, bus 0-255 > acpihpet0 at acpi0: 19200000 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.96 MHz, 06-9c-00 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 38MHz > cpu0: mwait min=64, max=64, C-substates=0.2.0.2.2.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.95 MHz, 06-9c-00 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.95 MHz, 06-9c-00 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Celeron(R) N5100 @ 1.10GHz, 2793.95 MHz, 06-9c-00 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,RDSEED,SMAP,CLFLUSHOPT,CLWB,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line > 12-way L2 cache, 4MB 64b/line 16-way L3 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpiprt0 at acpi0: bus 0 (PC00) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus -1 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus 2 (RP05) > acpiprt6 at acpi0: bus 3 (RP06) > acpiprt7 at acpi0: bus 4 (RP07) > acpiprt8 at acpi0: bus 5 (RP08) > acpiprt9 at acpi0: bus -1 (RP09) > acpiprt10 at acpi0: bus -1 (RP10) > acpiprt11 at acpi0: bus -1 (RP11) > acpiprt12 at acpi0: bus -1 (RP12) > acpiprt13 at acpi0: bus -1 (RP13) > acpiprt14 at acpi0: bus -1 (RP14) > acpiprt15 at acpi0: bus -1 (RP15) > acpiprt16 at acpi0: bus -1 (RP16) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpiec0 at acpi0: not present > acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001 > com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > com0: console > "ACPI000E" at acpi0 not configured > acpibtn0 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "INT33A1" at acpi0 not configured > acpibtn1 at acpi0: PWRB > tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 rev 0x0 > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpipwrres0 at acpi0: WRST > acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31), > C1(1000@1 mwait.1), PSS > acpipwrres1 at acpi0: FN00, resource for FAN0 > acpipwrres2 at acpi0: FN01, resource for FAN1 > acpipwrres3 at acpi0: FN02, resource for FAN2 > acpipwrres4 at acpi0: FN03, resource for FAN3 > acpipwrres5 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 119 degC > acpipwrres6 at acpi0: PIN_ > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > acpivout1 at acpivideo0: DD2F > cpu0: Enhanced SpeedStep 2793 MHz: speeds: 1101, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > 0:31:5: mem address conflict 0xfe010000/0x1000 > pchb0 at pci0 dev 0 function 0 "Intel Jasper Lake Host" rev 0x00 > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics" rev 0x01 > drm0 at inteldrm0 > inteldrm0: msi, JASPERLAKE, gen 11 > "Intel Jasper Lake DPTF" rev 0x00 at pci0 dev 4 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel Jasper Lake xHCI" rev 0x01: msi, xHCI > 1.10 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel Jasper Lake Shared SRAM" rev 0x01 at pci0 dev 20 function 2 not > configured > "Intel Jasper Lake HECI" rev 0x01 at pci0 dev 22 function 0 not configured > ahci0 at pci0 dev 23 function 0 "Intel Jasper Lake AHCI" rev 0x01: msi, AHCI > 1.3.1 > ahci0: port 0: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0> > naa.5002538e19a4df9d > sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin > ppb0 at pci0 dev 28 function 0 "Intel Jasper Lake PCIE" rev 0x01: msi > pci1 at ppb0 bus 1 > nvme0 at pci1 dev 0 function 0 "Samsung PM991 NVMe" rev 0x00: msix, NVMe 1.4 > nvme0: Samsung SSD 980 1TB, firmware 3B4QFXO7, serial S64ANL0TB16610W > scsibus2 at nvme0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <NVMe, Samsung SSD 980, 3B4Q> > sd1: 953869MB, 512 bytes/sector, 1953525168 sectors > ppb1 at pci0 dev 28 function 4 "Intel Jasper Lake PCIE" rev 0x01: msi > pci2 at ppb1 bus 2 > igc0 at pci2 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, > address 60:be:b4:08:d1:54 > ppb2 at pci0 dev 28 function 5 "Intel Jasper Lake PCIE" rev 0x01: msi > pci3 at ppb2 bus 3 > igc1 at pci3 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, > address 60:be:b4:08:d1:55 > ppb3 at pci0 dev 28 function 6 "Intel Jasper Lake PCIE" rev 0x01: msi > pci4 at ppb3 bus 4 > igc2 at pci4 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, > address 60:be:b4:08:d1:56 > ppb4 at pci0 dev 28 function 7 "Intel Jasper Lake PCIE" rev 0x01: msi > pci5 at ppb4 bus 5 > igc3 at pci5 dev 0 function 0 "Intel I226-V" rev 0x04, msix, 4 queues, > address 60:be:b4:08:d1:57 > pcib0 at pci0 dev 31 function 0 "Intel Jasper Lake eSPI" rev 0x01 > azalia0 at pci0 dev 31 function 3 "Intel Jasper Lake HD Audio" rev 0x01: msi > azalia0: no supported codecs > ichiic0 at pci0 dev 31 function 4 "Intel Jasper Lake SMBus" rev 0x01: apic 2 > int 16 > iic0 at ichiic0 > "Intel Jasper Lake SPI" rev 0x01 at pci0 dev 31 function 5 not configured > isa0 at pcib0 > isadma0 at isa0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > umass0 at uhub0 port 3 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev > 2.10/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus3 at umass0: 2 targets, initiator 0 > sd2 at scsibus3 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable > serial.0781558b092121181446 > sd2: 59840MB, 512 bytes/sector, 122552320 sectors > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on sd2a (a3d4440d3ab20346.a) swap on sd2b dump on sd2b > drm:pid76358:dmc_load_work_fn *NOTICE* [drm] Failed to load DMC firmware > i915/icl_dmc_ver1_09.bin. Disabling runtime power management. > inteldrm0: 1024x768, 32bpp > wsdisplay0 at inteldrm0 mux 1 > wsdisplay0: screen 0-5 added (std, vt100 emulation) > > pcidump -v: > > Domain /dev/pci0: > 0:0:0: Intel Jasper Lake Host > 0x0000: Vendor ID: 8086, Product ID: 4e12 > 0x0004: Command: 0006, Status: 2090 > 0x0008: Class: 06 Bridge, Subclass: 00 Host, > Interface: 00, Revision: 00 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0x00e0: Capability 0x09: Vendor Specific > 0:2:0: Intel UHD Graphics > 0x0000: Vendor ID: 8086, Product ID: 4e61 > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 03 Display, Subclass: 00 VGA, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000006000000000/0x01000000 > 0x0018: BAR mem prefetchable 64bit addr: 0x0000004000000000/0x10000000 > 0x0020: BAR io addr: 0x00003000/0x0040 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 2212 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x09: Vendor Specific > 0x0070: Capability 0x10: PCI Express > Max Payload Size: 128 / 128 bytes > Max Read Request Size: 128 bytes > 0x0100: Enhanced Capability 0x1b: Process Address Space ID > 0x0200: Enhanced Capability 0x0f: Address Translation Services > 0x0300: Enhanced Capability 0x13: Page Request Interface > 0x00ac: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x00d0: Capability 0x01: Power Management > State: D0 > 0:4:0: Intel Jasper Lake DPTF > 0x0000: Vendor ID: 8086, Product ID: 4e03 > 0x0004: Command: 0000, Status: 0090 > 0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 00 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000006001110000/0x00010000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0090: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x00d0: Capability 0x01: Power Management > State: D0 > 0x00e0: Capability 0x09: Vendor Specific > 0:20:0: Intel Jasper Lake xHCI > 0x0000: Vendor ID: 8086, Product ID: 4ded > 0x0004: Command: 0006, Status: 0290 > 0x0008: Class: 0c Serial Bus, Subclass: 03 USB, > Interface: 30, Revision: 01 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000006001100000/0x00010000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0070: Capability 0x01: Power Management > State: D0 > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x09: Vendor Specific > 0:20:2: Intel Jasper Lake Shared SRAM > 0x0000: Vendor ID: 8086, Product ID: 4def > 0x0004: Command: 0000, Status: 0010 > 0x0008: Class: 05 Memory, Subclass: 00 RAM, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000006001124000/0x00002000 > 0x0018: BAR mem 64bit addr: 0x0000006001128000/0x00001000 > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0080: Capability 0x01: Power Management > State: D0 > 0:22:0: Intel Jasper Lake HECI > 0x0000: Vendor ID: 8086, Product ID: 4de0 > 0x0004: Command: 0000, Status: 0010 > 0x0008: Class: 07 Communications, Subclass: 80 Miscellaneous, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000006001127000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > State: D0 > 0x008c: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x00a4: Capability 0x09: Vendor Specific > 0:23:0: Intel Jasper Lake AHCI > 0x0000: Vendor ID: 8086, Product ID: 4dd3 > 0x0004: Command: 0007, Status: 02b0 > 0x0008: Class: 01 Mass Storage, Subclass: 06 SATA, > Interface: 01, Revision: 01 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0x80500000/0x00002000 > 0x0014: BAR mem 32bit addr: 0x80503000/0x00000100 > 0x0018: BAR io addr: 0x00003090/0x0008 > 0x001c: BAR io addr: 0x00003080/0x0004 > 0x0020: BAR io addr: 0x00003060/0x0020 > 0x0024: BAR mem 32bit addr: 0x80502000/0x00000800 > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0070: Capability 0x01: Power Management > State: D0 > 0x00a8: Capability 0x12: SATA > 0:28:0: Intel Jasper Lake PCIE > 0x0000: Vendor ID: 8086, Product ID: 4db8 > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 1, Subordinate Bus: 1, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 8040, Memory Limit: 8040 > 0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0010 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 128 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x2 / x2 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0220: Enhanced Capability 0x0d: Access Control Services > 0x0150: Enhanced Capability 0x1f: Precision Time Measurement > 0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0a00: Enhanced Capability 0x1d: Downstream Port Containment > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:28:4: Intel Jasper Lake PCIE > 0x0000: Vendor ID: 8086, Product ID: 4dbc > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 2, Subordinate Bus: 2, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 8020, Memory Limit: 8030 > 0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0010 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 128 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0220: Enhanced Capability 0x0d: Access Control Services > 0x0150: Enhanced Capability 0x1f: Precision Time Measurement > 0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0a00: Enhanced Capability 0x1d: Downstream Port Containment > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:28:5: Intel Jasper Lake PCIE > 0x0000: Vendor ID: 8086, Product ID: 4dbd > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 3, Subordinate Bus: 3, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 8000, Memory Limit: 8010 > 0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 02, Line: ff, Bridge Control: 0010 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 128 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0220: Enhanced Capability 0x0d: Access Control Services > 0x0150: Enhanced Capability 0x1f: Precision Time Measurement > 0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0a00: Enhanced Capability 0x1d: Downstream Port Containment > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:28:6: Intel Jasper Lake PCIE > 0x0000: Vendor ID: 8086, Product ID: 4dbe > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 4, Subordinate Bus: 4, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 7fe0, Memory Limit: 7ff0 > 0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 03, Line: ff, Bridge Control: 0010 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 128 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0220: Enhanced Capability 0x0d: Access Control Services > 0x0150: Enhanced Capability 0x1f: Precision Time Measurement > 0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0a00: Enhanced Capability 0x1d: Downstream Port Containment > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:28:7: Intel Jasper Lake PCIE > 0x0000: Vendor ID: 8086, Product ID: 4dbf > 0x0004: Command: 0007, Status: 0010 > 0x0008: Class: 06 Bridge, Subclass: 04 PCI, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 81, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: Primary Bus: 0, Secondary Bus: 5, Subordinate Bus: 5, > Secondary Latency Timer: 00 > 0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000 > 0x0020: Memory Base: 7fc0, Memory Limit: 7fd0 > 0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001 > 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 > 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 > 0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000 > 0x0038: Expansion ROM Base Address: 00000000 > 0x003c: Interrupt Pin: 04, Line: ff, Bridge Control: 0010 > 0x0040: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 128 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0220: Enhanced Capability 0x0d: Access Control Services > 0x0150: Enhanced Capability 0x1f: Precision Time Measurement > 0x0a30: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0a00: Enhanced Capability 0x1d: Downstream Port Containment > 0x0080: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > 0x0090: Capability 0x0d: PCI-PCI > 0x00a0: Capability 0x01: Power Management > State: D0 > 0:31:0: Intel Jasper Lake eSPI > 0x0000: Vendor ID: 8086, Product ID: 4d87 > 0x0004: Command: 0407, Status: 0000 > 0x0008: Class: 06 Bridge, Subclass: 01 ISA, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 80, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0:31:3: Intel Jasper Lake HD Audio > 0x0000: Vendor ID: 8086, Product ID: 4dc8 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 04 Multimedia, Subclass: 03 HD Audio, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 20, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000006001120000/0x00004000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR mem 64bit addr: 0x0000006001000000/0x00100000 > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > State: D0 > 0x0080: Capability 0x09: Vendor Specific > 0x0060: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0:31:4: Intel Jasper Lake SMBus > 0x0000: Vendor ID: 8086, Product ID: 4da3 > 0x0004: Command: 0003, Status: 0280 > 0x0008: Class: 0c Serial Bus, Subclass: 05 SMBus, > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0x0000006001126000/0x00000100 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR io addr: 0x0000efa0/0x0020 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0:31:5: Intel Jasper Lake SPI > 0x0000: Vendor ID: 8086, Product ID: 4da4 > 0x0004: Command: 0402, Status: 0000 > 0x0008: Class: 0c Serial Bus, Subclass: 80 (unknown), > Interface: 00, Revision: 01 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0x00000000/0x00001000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 7270 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 1:0:0: Samsung PM991 NVMe > 0x0000: Vendor ID: 144d, Product ID: a809 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 01 Mass Storage, Subclass: 08 NVM, > Interface: 02, Revision: 00 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 64bit addr: 0x0000000080400000/0x00004000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 144d Product ID: a801 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > State: D0 > 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x0070: Capability 0x10: PCI Express > Max Payload Size: 256 / 256 bytes > Max Read Request Size: 512 bytes > Link Speed: 5.0 / 8.0 GT/s > Link Width: x2 / x4 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0148: Enhanced Capability 0x03: Device Serial Number > Serial Number: 0000000000000000 > 0x0158: Enhanced Capability 0x04: Power Budgeting > 0x0168: Enhanced Capability 0x19: Secondary PCIe Capability > 0x0188: Enhanced Capability 0x18: Latency Tolerance Reporting > 0x0190: Enhanced Capability 0x1e: L1 PM > 0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X) > Enabled: yes; table size 13 (BAR 0:12288) > 2:0:0: Intel I226-V > 0x0000: Vendor ID: 8086, Product ID: 125c > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > Interface: 00, Revision: 04 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 32bit addr: 0x80200000/0x00100000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR mem 32bit addr: 0x80300000/0x00004000 > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > State: D0 > 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X) > Enabled: yes; table size 5 (BAR 3:0) > 0x00a0: Capability 0x10: PCI Express > Max Payload Size: 256 / 512 bytes > Max Read Request Size: 512 bytes > Link Speed: 5.0 / 5.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0140: Enhanced Capability 0x03: Device Serial Number > Serial Number: 60beb4ffff08d154 > 0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting > 0x01f0: Enhanced Capability 0x1f: Precision Time Measurement > 0x01e0: Enhanced Capability 0x1e: L1 PM > 3:0:0: Intel I226-V > 0x0000: Vendor ID: 8086, Product ID: 125c > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > Interface: 00, Revision: 04 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 32bit addr: 0x80000000/0x00100000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR mem 32bit addr: 0x80100000/0x00004000 > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > State: D0 > 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X) > Enabled: yes; table size 5 (BAR 3:0) > 0x00a0: Capability 0x10: PCI Express > Max Payload Size: 256 / 512 bytes > Max Read Request Size: 512 bytes > Link Speed: 5.0 / 5.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0140: Enhanced Capability 0x03: Device Serial Number > Serial Number: 60beb4ffff08d155 > 0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting > 0x01f0: Enhanced Capability 0x1f: Precision Time Measurement > 0x01e0: Enhanced Capability 0x1e: L1 PM > 4:0:0: Intel I226-V > 0x0000: Vendor ID: 8086, Product ID: 125c > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > Interface: 00, Revision: 04 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 32bit addr: 0x7fe00000/0x00100000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR mem 32bit addr: 0x7ff00000/0x00004000 > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > State: D0 > 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X) > Enabled: yes; table size 5 (BAR 3:0) > 0x00a0: Capability 0x10: PCI Express > Max Payload Size: 256 / 512 bytes > Max Read Request Size: 512 bytes > Link Speed: 5.0 / 5.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0140: Enhanced Capability 0x03: Device Serial Number > Serial Number: 60beb4ffff08d156 > 0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting > 0x01f0: Enhanced Capability 0x1f: Precision Time Measurement > 0x01e0: Enhanced Capability 0x1e: L1 PM > 5:0:0: Intel I226-V > 0x0000: Vendor ID: 8086, Product ID: 125c > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 02 Network, Subclass: 00 Ethernet, > Interface: 00, Revision: 04 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 10 > 0x0010: BAR mem 32bit addr: 0x7fc00000/0x00100000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR mem 32bit addr: 0x7fd00000/0x00004000 > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 8086 Product ID: 0000 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0040: Capability 0x01: Power Management > State: D0 > 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: no > 0x0070: Capability 0x11: Extended Message Signalled Interrupts (MSI-X) > Enabled: yes; table size 5 (BAR 3:0) > 0x00a0: Capability 0x10: PCI Express > Max Payload Size: 256 / 512 bytes > Max Read Request Size: 512 bytes > Link Speed: 5.0 / 5.0 GT/s > Link Width: x1 / x1 > 0x0100: Enhanced Capability 0x01: Advanced Error Reporting > 0x0140: Enhanced Capability 0x03: Device Serial Number > Serial Number: 60beb4ffff08d157 > 0x01c0: Enhanced Capability 0x18: Latency Tolerance Reporting > 0x01f0: Enhanced Capability 0x1f: Precision Time Measurement > 0x01e0: Enhanced Capability 0x1e: L1 PM >
