I was playing with the USB NIC that's in my (USB-C) monitor. As soon
as I do traffic over the interface, I get a kernel panic:
panic: kernel diagnostic assertion "timo || _kernel_lock_held()" failed: file
"/usr/src/sys/kern/kern_synch.c", line 127
This is the hostname.if(5) file for ure0:
--- /etc/hostname.ure0 -----------------------------------------------
-inet6
inet autoconf
down
----------------------------------------------------------------------
When I `doas ifconfig ure0 up`, dhcpleased starts asking the network
for leases and I get:
--- panic ------------------------------------------------------------
panic: kernel diagnostic assertion "timo || _kernel_lock_held()" failed: file
"/usr/src/sys/kern/kern_synch.c", line 127
Stopped at db_enter+0x10: popq %rbp
TID PID UID PRFLAGS PFLAGS CPU COMMAND
* 51341 34879 629 0x10 0 0 avahi-daemon
442479 87433 48 0x1100012 0 2 unwind
194861 75874 0 0 0 1 dhcpleased
db_enter() at db_enter+0x10
panic(ffffffff81f33e3e) at panic+0xbf
__assert(ffffffff81fa5cb0,ffffffff81f4008b,7f,ffffffff81fbd88e) at __assert+0x25
tsleep(fffffd8413ec77b0,10,ffffffff81f5a4c5,0) at tsleep+0x17d
usbd_transfer(fffffd8413ec77b0) at usbd_transfer+0x222
usbd_do_request_flags(ffff80000077f300,ffff80002ed74808,ffff80002ed74804,0,0,1388)
at usbd_do_request_flags+0x139
ure_iff(ffff80000074f800) at ure_iff+0x6d
ure_ioctl(ffff80000074f8a0,80206931,ffff80002ed748c0) at ure_ioctl+0x11e
in_addmulti(ffff80002ed74940,ffff80000074f8a0) at in_addmulti+0xfe
ip_setmoptions(c,fffffd840c2b3a50,fffffd805f74e600,0) at ip_setmoptions+0x540
sys_setsockopt(ffff80002ec5a2b0,ffff80002ed74a10,ffff80002ed74a70) at
sys_setsockopt+0x146
syscall(ffff80002ed74ae0) at syscall+0x384
Xsyscall() at Xsyscall+0x128
end of kernel
end trace frame: 0x7f7fffff22f0, count: 2
----------------------------------------------------------------------
Same (well, similar) happens when I remove the autoconf flag and
create a vlan interface on top of ure0 - all fine until I try to get a
DHCP lease. The dmesg below contains both panics.
The interface is connected to a 1Gb/s network but shows:
--- ifconfig ure0 ----------------------------------------------------
ure0: flags=808802<BROADCAST,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500
lladdr c8:4b:d6:af:a7:8d
index 4 priority 0 llprio 3
media: Ethernet autoselect (10baseT full-duplex)
status: active
----------------------------------------------------------------------
So it doesn't seem to negotiate properly. In dmesg, it looks like
this:
--- dmesg | grep ure0 | head -n 3 ------------------------------------
ure0 at uhub4 port 3 configuration 1 interface 0 "Realtek USB 10/100/1000 LAN"
rev 3.20/33.00 addr 5
ure0: , unknown ver 7420, address c8:4b:d6:af:a7:8d
ukphy0 at ure0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x000732, model 0x0004
----------------------------------------------------------------------
So, yeah .. not 100% sure about the NIC, but I have been able to use
it with previous snapshots (don't recall the build date of those snaps
and haven't gone back to older kernels yet). If that's useful, I can
try going back to older snaps this Friday.
Paul
--- dmesg ------------------------------------------------------------
OpenBSD 7.2-current (GENERIC.MP) #865: Mon Dec 5 21:00:55 MST 2022
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16877355008 (16095MB)
avail mem = 16348422144 (15591MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x5fd15000 (95 entries)
bios0: vendor Dell Inc. version "1.10.0" date 09/08/2022
bios0: Dell Inc. XPS 13 9305
efi0 at bios0: UEFI 2.7
efi0: Dell rev 0x10000
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SSDT SSDT HPET APIC MCFG SSDT NHLT SSDT SSDT SSDT SSDT
LPIT WSMT SSDT SSDT DBGP DBG2 SLIC BOOT SSDT TPM2 MSDM DMAR SSDT SSDT PTDT BGRT
FPDT
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEGP(S4) PEGP(S4) XHCI(S0) XDCI(S4)
HDAS(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4689.19 MHz, 06-8c-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.1.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4689.20 MHz, 06-8c-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.58 MHz, 06-8c-01
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.59 MHz, 06-8c-01
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus 164 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (RP09)
acpiprt11 at acpi0: bus -1 (RP10)
acpiprt12 at acpi0: bus -1 (RP11)
acpiprt13 at acpi0: bus 165 (RP12)
acpiprt14 at acpi0: bus -1 (RP13)
acpiprt15 at acpi0: bus -1 (RP14)
acpiprt16 at acpi0: bus -1 (RP15)
acpiprt17 at acpi0: bus -1 (RP16)
acpiprt18 at acpi0: bus -1 (RP17)
acpiprt19 at acpi0: bus -1 (RP18)
acpiprt20 at acpi0: bus -1 (RP19)
acpiprt21 at acpi0: bus -1 (RP20)
acpiprt22 at acpi0: bus -1 (RP21)
acpiprt23 at acpi0: bus -1 (RP22)
acpiprt24 at acpi0: bus -1 (RP23)
acpiprt25 at acpi0: bus -1 (RP24)
acpiprt26 at acpi0: bus 2 (TRP0)
acpiprt27 at acpi0: bus 83 (TRP1)
acpiec0 at acpi0
### AML PARSE ERROR (0xfffe662d): Undefined name: VSP1
error evaluating: \\_SB_.PC00.LPCB.ECDV.TSKN._STA
"INT3472" at acpi0 not configured
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
### AML PARSE ERROR (0xfffe662d): Undefined name: VSP1
error evaluating: \\_SB_.PC00.LPCB.ECDV.TSKN._STA
"INTC1043" at acpi0 not configured
"ELAN2930" at acpi0 not configured
"DLL0945" at acpi0 not configured
"SONY362A" at acpi0 not configured
"SONY362A" at acpi0 not configured
"ACPI000E" at acpi0 not configured
pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000
0xfd6a0000/0x10000 0xfd690000/0x10000 irq 14, 360 pins
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL G8VCF6C" serial 563 type LiP oem "SMP"
"INTC1051" at acpi0 not configured
"INTC1040" at acpi0 not configured
"USBC000" at acpi0 not configured
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpipwrres0 at acpi0: DBTP, resource for HS01
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: DRST
acpipwrres3 at acpi0: V0PR
acpipwrres4 at acpi0: V1PR
acpipwrres5 at acpi0: V2PR
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: TBT0, resource for TDM0, TRP0, TRP1
acpipwrres8 at acpi0: TBT1, resource for TDM1, TRP2, TRP3
acpipwrres9 at acpi0: D3C_, resource for TXHC, TDM0, TDM1, TRP0, TRP1, TRP2,
TRP3
acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpipwrres10 at acpi0: PIN_
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 4689 MHz: speeds: 2701, 2700, 2600, 2500, 2300, 2100,
1900, 1700, 1600, 1400, 1200, 1100, 900, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Core 11G Host" rev 0x01
inteldrm0 at pci0 dev 2 function 0 "Intel Xe Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, TIGERLAKE, gen 12
"Intel Core 11G DTT" rev 0x01 at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 6 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "SK hynix", unknown product 0x174a rev
0x00: msix, NVMe 1.3
nvme0: PC711 NVMe SK hynix 512GB, firmware 41001131, serial CDA7N524910607D6E
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, PC711 NVMe SK hy, 4100>
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
ppb1 at pci0 dev 7 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 7 function 1 "Intel Core 11G PCIE" rev 0x01: msi
pci3 at ppb2 bus 83
"Intel Core 11G GNA" rev 0x01 at pci0 dev 8 function 0 not configured
"Intel Core 11G SRAM" rev 0x01 at pci0 dev 10 function 0 not configured
xhci0 at pci0 dev 13 function 0 "Intel Core 11G xHCI" rev 0x01: msi, xHCI 1.20
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 2 not configured
xhci1 at pci0 dev 20 function 0 "Intel 500 Series xHCI" rev 0x20: msi, xHCI 1.20
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 500 Series Shared SRAM" rev 0x20 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 27
iic0 at dwiic0
ihidev0 at iic0 addr 0x10 gpio 321, vendor 0x4f3 product 0x2930, ELAN2930
ihidev0: 14 report ids
ims0 at ihidev0 reportid 1: 1 button, tip
wsmouse0 at ims0 mux 0
hid at ihidev0 reportid 2 not configured
hid at ihidev0 reportid 3 not configured
hid at ihidev0 reportid 4 not configured
hid at ihidev0 reportid 6 not configured
hid at ihidev0 reportid 10 not configured
hid at ihidev0 reportid 14 not configured
dwiic1 at pci0 dev 21 function 1 "Intel 500 Series I2C" rev 0x20: apic 2 int 40
iic1 at dwiic1
ihidev1 at iic1 addr 0x2c gpio 327, vendor 0x6cb product 0x76b1, DLL0945
ihidev1: 15 report ids
imt0 at ihidev1: clickpad, 5 contacts
wsmouse1 at imt0 mux 0
ims1 at ihidev1 reportid 2: 2 buttons
wsmouse2 at ims1 mux 0
hid at ihidev1 reportid 6 not configured
hid at ihidev1 reportid 7 not configured
hid at ihidev1 reportid 9 not configured
hid at ihidev1 reportid 10 not configured
hid at ihidev1 reportid 11 not configured
hid at ihidev1 reportid 12 not configured
hid at ihidev1 reportid 13 not configured
hid at ihidev1 reportid 14 not configured
hid at ihidev1 reportid 15 not configured
"Intel 500 Series HECI" rev 0x20 at pci0 dev 22 function 0 not configured
dwiic2 at pci0 dev 25 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 31
iic2 at dwiic2
dwiic3 at pci0 dev 25 function 1 "Intel 500 Series I2C" rev 0x20: apic 2 int 32
iic3 at dwiic3
ppb3 at pci0 dev 28 function 0 "Intel 500 Series PCIE" rev 0x20: msi
pci4 at ppb3 bus 164
rtsx0 at pci4 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb4 at pci0 dev 29 function 0 "Intel 500 Series PCIE" rev 0x20: msi
pci5 at ppb4 bus 165
iwx0 at pci5 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix
pcib0 at pci0 dev 31 function 0 "Intel 500 Series eSPI" rev 0x20
azalia0 at pci0 dev 31 function 3 "Intel 500 Series HD Audio" rev 0x20: msi
azalia0: codecs: Realtek ALC299, Intel/0x2812, using Realtek ALC299
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 500 Series SMBus" rev 0x20: apic 2 int
16
iic4 at ichiic0
"Intel 500 Series SPI" rev 0x20 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse3 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
acpi0: state S3 unavailable
uhub2 at uhub0 port 4 configuration 1 interface 0 "Microchip USB7206 Smart Hub"
rev 3.20/6.25 addr 2
uhub3 at uhub2 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub"
rev 3.00/d.a1 addr 3
uhub4 at uhub2 port 4 configuration 1 interface 0 "Microchip USB7216 Smart Hub"
rev 3.20/1.91 addr 4
ure0 at uhub4 port 3 configuration 1 interface 0 "Realtek USB 10/100/1000 LAN"
rev 3.20/33.00 addr 5
ure0: , unknown ver 7420, address c8:4b:d6:af:a7:8d
ukphy0 at ure0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x000732, model 0x0004
uvideo0 at uhub1 port 3 configuration 1 interface 0 "CN09357G8LG0017QA9T6A01
Integrated_Webcam_HD" rev 2.01/80.08 addr 2
video0 at uvideo0
uhub5 at uhub1 port 4 configuration 1 interface 0 "Microchip USB4206 Smart Hub"
rev 2.10/6.25 addr 3
uvideo1 at uhub5 port 1 configuration 1 interface 0 "Logitech HD Pro Webcam
C920" rev 2.10/0.0c addr 4
video1 at uvideo1
uaudio0 at uhub5 port 1 configuration 1 interface 3 "Logitech HD Pro Webcam
C920" rev 2.10/0.0c addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 2 rec, 2 ctls
audio1 at uaudio0
uhidev0 at uhub5 port 2 configuration 1 interface 0 "Logitech MX518 Gaming
Mouse" rev 2.00/40.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse4 at ums0 mux 0
uhidev1 at uhub5 port 2 configuration 1 interface 1 "Logitech MX518 Gaming
Mouse" rev 2.00/40.00 addr 5
uhidev1: iclass 3/0, 17 report ids
uhidpp0 at uhidev1
ukbd0 at uhidev1 reportid 1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
ucc0 at uhidev1 reportid 3: 652 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhub6 at uhub5 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/d.a0 addr 6
uhidev2 at uhub6 port 4 configuration 1 interface 0 "Metadot - Das Keyboard Das
Keyboard" rev 2.00/1.00 addr 7
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev3 at uhub6 port 4 configuration 1 interface 1 "Metadot - Das Keyboard Das
Keyboard" rev 2.00/1.00 addr 7
uhidev3: iclass 3/0, 3 report ids
uhid1 at uhidev3 reportid 1: input=0, output=0, feature=7
uhid2 at uhidev3 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev3 reportid 3: 24 usages, 13 keys, enum
wskbd4 at ucc1 mux 1
uhub7 at uhub5 port 4 configuration 1 interface 0 "Microchip USB4216 Smart Hub"
rev 2.10/1.91 addr 8
ugen0 at uhub7 port 5 "Microchip Tech USB2 Controller Hub" rev 2.01/2.07 addr 9
uhidev4 at uhub5 port 5 configuration 1 interface 1 "Microchip Tech USB2
Controller Hub" rev 2.01/6.25 addr 10
uhidev4: iclass 3/0
uhid3 at uhidev4: input=64, output=64, feature=0
ugen1 at uhub5 port 5 configuration 1 "Microchip Tech USB2 Controller Hub" rev
2.01/6.25 addr 10
uhidev5 at uhub1 port 6 configuration 1 interface 0 "Yubico YubiKey
OTP+FIDO+CCID" rev 2.00/5.43 addr 11
uhidev5: iclass 3/1
ukbd2 at uhidev5: 8 variable keys, 6 key codes
wskbd5 at ukbd2 mux 1
uhidev6 at uhub1 port 6 configuration 1 interface 1 "Yubico YubiKey
OTP+FIDO+CCID" rev 2.00/5.43 addr 11
uhidev6: iclass 3/0
fido0 at uhidev6: input=64, output=64, feature=0
ugen2 at uhub1 port 6 configuration 1 "Yubico YubiKey OTP+FIDO+CCID" rev
2.00/5.43 addr 11
umodem0 at uhub1 port 9 configuration 1 interface 0 "HTMicroelectronics Goodix
Fingerprint Device" rev 2.00/1.00 addr 12
umodem0: data interface 1, has no CM over data, has no break
umodem0: status change notification available
ucom0 at umodem0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 471045MB, 512 bytes/sector, 964701698 sectors
root on sd1a (cbe0d0458386a175.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wskbd5: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwx0: hw rev 0x340, fw 67.8f59b80b.0, address 14:85:7f:f1:19:86
panic: kernel diagnostic assertion "timo || _kernel_lock_held()" failed: file
"/usr/src/sys/kern/kern_synch.c", line 127
Stopped at db_enter+0x10: popq %rbp
TID PID UID PRFLAGS PFLAGS CPU COMMAND
*374188 30484 629 0x10 0 0 avahi-daemon
60908 8556 48 0x1100012 0 2 unwind
265659 54928 0 0 0 1 dhcpleased
381765 7016 0 0x14000 0x200 3 systqmp
db_enter() at db_enter+0x10
panic(ffffffff81f3654c) at panic+0xbf
__assert(ffffffff81fa631a,ffffffff81f42a87,7f,ffffffff81fbfe8a) at __assert+0x25
tsleep(fffffd8413ec5008,10,ffffffff81f56edd,0) at tsleep+0x17d
usbd_transfer(fffffd8413ec5008) at usbd_transfer+0x222
usbd_do_request_flags(ffff80000077f300,ffff80002ed6a4f8,ffff80002ed6a4f4,0,0,1388)
at usbd_do_request_flags+0x139
ure_iff(ffff80000074f800) at ure_iff+0x6d
ure_ioctl(ffff80000074f8a0,80206931,ffff80002ed6a690) at ure_ioctl+0x11e
vlan_multi_add(ffff800001a0d800,ffff80002ed6a690) at vlan_multi_add+0x136
vlan_ioctl(ffff800001a0d800,80206931,ffff80002ed6a690) at vlan_ioctl+0x399
in_addmulti(ffff80002ed6a710,ffff800001a0d800) at in_addmulti+0xfe
ip_setmoptions(c,fffffd840b1373b8,fffffd805f745a00,0) at ip_setmoptions+0x540
sys_setsockopt(ffff8000fffe6008,ffff80002ed6a7e0,ffff80002ed6a840) at
sys_setsockopt+0x146
syscall(ffff80002ed6a8b0) at syscall+0x384
end trace frame: 0xffff80002ed6a930, count: 0
https://www.openbsd.org/ddb.html describes the minimum info required in bug
reports. Insufficient info makes it difficult to find and fix bugs.
ddb{0}> rebooting...
OpenBSD 7.2-current (GENERIC.MP) #865: Mon Dec 5 21:00:55 MST 2022
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16877355008 (16095MB)
avail mem = 16348413952 (15591MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x5fd15000 (95 entries)
bios0: vendor Dell Inc. version "1.10.0" date 09/08/2022
bios0: Dell Inc. XPS 13 9305
efi0 at bios0: UEFI 2.7
efi0: Dell rev 0x10000
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SSDT SSDT HPET APIC MCFG SSDT NHLT SSDT SSDT SSDT SSDT
LPIT WSMT SSDT SSDT DBGP DBG2 SLIC BOOT SSDT TPM2 MSDM DMAR SSDT SSDT PTDT BGRT
FPDT
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEGP(S4) PEGP(S4) XHCI(S0) XDCI(S4)
HDAS(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4689.20 MHz, 06-8c-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.1.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4689.20 MHz, 06-8c-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.57 MHz, 06-8c-01
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.57 MHz, 06-8c-01
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus 164 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (RP09)
acpiprt11 at acpi0: bus -1 (RP10)
acpiprt12 at acpi0: bus -1 (RP11)
acpiprt13 at acpi0: bus 165 (RP12)
acpiprt14 at acpi0: bus -1 (RP13)
acpiprt15 at acpi0: bus -1 (RP14)
acpiprt16 at acpi0: bus -1 (RP15)
acpiprt17 at acpi0: bus -1 (RP16)
acpiprt18 at acpi0: bus -1 (RP17)
acpiprt19 at acpi0: bus -1 (RP18)
acpiprt20 at acpi0: bus -1 (RP19)
acpiprt21 at acpi0: bus -1 (RP20)
acpiprt22 at acpi0: bus -1 (RP21)
acpiprt23 at acpi0: bus -1 (RP22)
acpiprt24 at acpi0: bus -1 (RP23)
acpiprt25 at acpi0: bus -1 (RP24)
acpiprt26 at acpi0: bus 2 (TRP0)
acpiprt27 at acpi0: bus 83 (TRP1)
acpiec0 at acpi0
### AML PARSE ERROR (0xfffe662d): Undefined name: VSP1
error evaluating: \\_SB_.PC00.LPCB.ECDV.TSKN._STA
"INT3472" at acpi0 not configured
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
### AML PARSE ERROR (0xfffe662d): Undefined name: VSP1
error evaluating: \\_SB_.PC00.LPCB.ECDV.TSKN._STA
"INTC1043" at acpi0 not configured
"ELAN2930" at acpi0 not configured
"DLL0945" at acpi0 not configured
"SONY362A" at acpi0 not configured
"SONY362A" at acpi0 not configured
"ACPI000E" at acpi0 not configured
pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000
0xfd6a0000/0x10000 0xfd690000/0x10000 irq 14, 360 pins
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL G8VCF6C" serial 563 type LiP oem "SMP"
"INTC1051" at acpi0 not configured
"INTC1040" at acpi0 not configured
"USBC000" at acpi0 not configured
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpipwrres0 at acpi0: DBTP, resource for HS01
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: DRST
acpipwrres3 at acpi0: V0PR
acpipwrres4 at acpi0: V1PR
acpipwrres5 at acpi0: V2PR
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: TBT0, resource for TDM0, TRP0, TRP1
acpipwrres8 at acpi0: TBT1, resource for TDM1, TRP2, TRP3
acpipwrres9 at acpi0: D3C_, resource for TXHC, TDM0, TDM1, TRP0, TRP1, TRP2,
TRP3
acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpipwrres10 at acpi0: PIN_
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 4689 MHz: speeds: 2701, 2700, 2600, 2500, 2300, 2100,
1900, 1700, 1600, 1400, 1200, 1100, 900, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Core 11G Host" rev 0x01
inteldrm0 at pci0 dev 2 function 0 "Intel Xe Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, TIGERLAKE, gen 12
"Intel Core 11G DTT" rev 0x01 at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 6 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "SK hynix", unknown product 0x174a rev
0x00: msix, NVMe 1.3
nvme0: PC711 NVMe SK hynix 512GB, firmware 41001131, serial CDA7N524910607D6E
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, PC711 NVMe SK hy, 4100>
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
ppb1 at pci0 dev 7 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 7 function 1 "Intel Core 11G PCIE" rev 0x01: msi
pci3 at ppb2 bus 83
"Intel Core 11G GNA" rev 0x01 at pci0 dev 8 function 0 not configured
"Intel Core 11G SRAM" rev 0x01 at pci0 dev 10 function 0 not configured
xhci0 at pci0 dev 13 function 0 "Intel Core 11G xHCI" rev 0x01: msi, xHCI 1.20
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 2 not configured
xhci1 at pci0 dev 20 function 0 "Intel 500 Series xHCI" rev 0x20: msi, xHCI 1.20
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 500 Series Shared SRAM" rev 0x20 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 27
iic0 at dwiic0
ihidev0 at iic0 addr 0x10 gpio 321, vendor 0x4f3 product 0x2930, ELAN2930
ihidev0: 14 report ids
ims0 at ihidev0 reportid 1: 1 button, tip
wsmouse0 at ims0 mux 0
hid at ihidev0 reportid 2 not configured
hid at ihidev0 reportid 3 not configured
hid at ihidev0 reportid 4 not configured
hid at ihidev0 reportid 6 not configured
hid at ihidev0 reportid 10 not configured
hid at ihidev0 reportid 14 not configured
dwiic1 at pci0 dev 21 function 1 "Intel 500 Series I2C" rev 0x20: apic 2 int 40
iic1 at dwiic1
ihidev1 at iic1 addr 0x2c gpio 327, vendor 0x6cb product 0x76b1, DLL0945
ihidev1: 15 report ids
imt0 at ihidev1: clickpad, 5 contacts
wsmouse1 at imt0 mux 0
ims1 at ihidev1 reportid 2: 2 buttons
wsmouse2 at ims1 mux 0
hid at ihidev1 reportid 6 not configured
hid at ihidev1 reportid 7 not configured
hid at ihidev1 reportid 9 not configured
hid at ihidev1 reportid 10 not configured
hid at ihidev1 reportid 11 not configured
hid at ihidev1 reportid 12 not configured
hid at ihidev1 reportid 13 not configured
hid at ihidev1 reportid 14 not configured
hid at ihidev1 reportid 15 not configured
"Intel 500 Series HECI" rev 0x20 at pci0 dev 22 function 0 not configured
dwiic2 at pci0 dev 25 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 31
iic2 at dwiic2
dwiic3 at pci0 dev 25 function 1 "Intel 500 Series I2C" rev 0x20: apic 2 int 32
iic3 at dwiic3
ppb3 at pci0 dev 28 function 0 "Intel 500 Series PCIE" rev 0x20: msi
pci4 at ppb3 bus 164
rtsx0 at pci4 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb4 at pci0 dev 29 function 0 "Intel 500 Series PCIE" rev 0x20: msi
pci5 at ppb4 bus 165
iwx0 at pci5 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix
pcib0 at pci0 dev 31 function 0 "Intel 500 Series eSPI" rev 0x20
azalia0 at pci0 dev 31 function 3 "Intel 500 Series HD Audio" rev 0x20: msi
azalia0: codecs: Realtek ALC299, Intel/0x2812, using Realtek ALC299
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 500 Series SMBus" rev 0x20: apic 2 int
16
iic4 at ichiic0
"Intel 500 Series SPI" rev 0x20 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse3 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub2 at uhub0 port 4 configuration 1 interface 0 "Microchip USB7206 Smart Hub"
rev 3.20/6.25 addr 2
uhub3 at uhub2 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub"
rev 3.00/d.a1 addr 3
uhub4 at uhub2 port 4 configuration 1 interface 0 "Microchip USB7216 Smart Hub"
rev 3.20/1.91 addr 4
ure0 at uhub4 port 3 configuration 1 interface 0 "Realtek USB 10/100/1000 LAN"
rev 3.20/33.00 addr 5
ure0: , unknown ver 7420, address c8:4b:d6:af:a7:8d
ukphy0 at ure0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x000732, model 0x0004
uvideo0 at uhub1 port 3 configuration 1 interface 0 "CN09357G8LG0017QA9T6A01
Integrated_Webcam_HD" rev 2.01/80.08 addr 2
video0 at uvideo0
uhub5 at uhub1 port 4 configuration 1 interface 0 "Microchip USB4206 Smart Hub"
rev 2.10/6.25 addr 3
uvideo1 at uhub5 port 1 configuration 1 interface 0 "Logitech HD Pro Webcam
C920" rev 2.10/0.0c addr 4
video1 at uvideo1
uaudio0 at uhub5 port 1 configuration 1 interface 3 "Logitech HD Pro Webcam
C920" rev 2.10/0.0c addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 2 rec, 2 ctls
audio1 at uaudio0
uhidev0 at uhub5 port 2 configuration 1 interface 0 "Logitech MX518 Gaming
Mouse" rev 2.00/40.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse4 at ums0 mux 0
uhidev1 at uhub5 port 2 configuration 1 interface 1 "Logitech MX518 Gaming
Mouse" rev 2.00/40.00 addr 5
uhidev1: iclass 3/0, 17 report ids
uhidpp0 at uhidev1
ukbd0 at uhidev1 reportid 1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
ucc0 at uhidev1 reportid 3: 652 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhub6 at uhub5 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/d.a0 addr 6
uhidev2 at uhub6 port 4 configuration 1 interface 0 "Metadot - Das Keyboard Das
Keyboard" rev 2.00/1.00 addr 7
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev3 at uhub6 port 4 configuration 1 interface 1 "Metadot - Das Keyboard Das
Keyboard" rev 2.00/1.00 addr 7
uhidev3: iclass 3/0, 3 report ids
uhid1 at uhidev3 reportid 1: input=0, output=0, feature=7
uhid2 at uhidev3 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev3 reportid 3: 24 usages, 13 keys, enum
wskbd4 at ucc1 mux 1
uhub7 at uhub5 port 4 configuration 1 interface 0 "Microchip USB4216 Smart Hub"
rev 2.10/1.91 addr 8
ugen0 at uhub7 port 5 "Microchip Tech USB2 Controller Hub" rev 2.01/2.07 addr 9
uhidev4 at uhub5 port 5 configuration 1 interface 1 "Microchip Tech USB2
Controller Hub" rev 2.01/6.25 addr 10
uhidev4: iclass 3/0
uhid3 at uhidev4: input=64, output=64, feature=0
ugen1 at uhub5 port 5 configuration 1 "Microchip Tech USB2 Controller Hub" rev
2.01/6.25 addr 10
uhidev5 at uhub1 port 6 configuration 1 interface 0 "Yubico YubiKey
OTP+FIDO+CCID" rev 2.00/5.43 addr 11
uhidev5: iclass 3/1
ukbd2 at uhidev5: 8 variable keys, 6 key codes
wskbd5 at ukbd2 mux 1
uhidev6 at uhub1 port 6 configuration 1 interface 1 "Yubico YubiKey
OTP+FIDO+CCID" rev 2.00/5.43 addr 11
uhidev6: iclass 3/0
fido0 at uhidev6: input=64, output=64, feature=0
ugen2 at uhub1 port 6 configuration 1 "Yubico YubiKey OTP+FIDO+CCID" rev
2.00/5.43 addr 11
umodem0 at uhub1 port 9 configuration 1 interface 0 "HTMicroelectronics Goodix
Fingerprint Device" rev 2.00/1.00 addr 12
umodem0: data interface 1, has no CM over data, has no break
umodem0: status change notification available
ucom0 at umodem0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 471045MB, 512 bytes/sector, 964701698 sectors
root on sd1a (cbe0d0458386a175.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wskbd5: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwx0: hw rev 0x340, fw 67.8f59b80b.0, address 14:85:7f:f1:19:86
panic: kernel diagnostic assertion "timo || _kernel_lock_held()" failed: file
"/usr/src/sys/kern/kern_synch.c", line 127
Stopped at db_enter+0x10: popq %rbp
TID PID UID PRFLAGS PFLAGS CPU COMMAND
* 51341 34879 629 0x10 0 0 avahi-daemon
442479 87433 48 0x1100012 0 2 unwind
194861 75874 0 0 0 1 dhcpleased
db_enter() at db_enter+0x10
panic(ffffffff81f33e3e) at panic+0xbf
__assert(ffffffff81fa5cb0,ffffffff81f4008b,7f,ffffffff81fbd88e) at __assert+0x25
tsleep(fffffd8413ec77b0,10,ffffffff81f5a4c5,0) at tsleep+0x17d
usbd_transfer(fffffd8413ec77b0) at usbd_transfer+0x222
usbd_do_request_flags(ffff80000077f300,ffff80002ed74808,ffff80002ed74804,0,0,1388)
at usbd_do_request_flags+0x139
ure_iff(ffff80000074f800) at ure_iff+0x6d
ure_ioctl(ffff80000074f8a0,80206931,ffff80002ed748c0) at ure_ioctl+0x11e
in_addmulti(ffff80002ed74940,ffff80000074f8a0) at in_addmulti+0xfe
ip_setmoptions(c,fffffd840c2b3a50,fffffd805f74e600,0) at ip_setmoptions+0x540
sys_setsockopt(ffff80002ec5a2b0,ffff80002ed74a10,ffff80002ed74a70) at
sys_setsockopt+0x146
syscall(ffff80002ed74ae0) at syscall+0x384
Xsyscall() at Xsyscall+0x128
end of kernel
end trace frame: 0x7f7fffff22f0, count: 2
https://www.openbsd.org/ddb.html describes the minimum info required in bug
reports. Insufficient info makes it difficult to find and fix bugs.
ddb{0}> rebooting...
OpenBSD 7.2-current (GENERIC.MP) #865: Mon Dec 5 21:00:55 MST 2022
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16877355008 (16095MB)
avail mem = 16348413952 (15591MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x5fd15000 (95 entries)
bios0: vendor Dell Inc. version "1.10.0" date 09/08/2022
bios0: Dell Inc. XPS 13 9305
efi0 at bios0: UEFI 2.7
efi0: Dell rev 0x10000
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SSDT SSDT HPET APIC MCFG SSDT NHLT SSDT SSDT SSDT SSDT
LPIT WSMT SSDT SSDT DBGP DBG2 SLIC BOOT SSDT TPM2 MSDM DMAR SSDT SSDT PTDT BGRT
FPDT
acpi0: wakeup devices PEG0(S4) PEGP(S4) PEGP(S4) PEGP(S4) XHCI(S0) XDCI(S4)
HDAS(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4689.19 MHz, 06-8c-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 38MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.1.2.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4689.20 MHz, 06-8c-01
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.58 MHz, 06-8c-01
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz, 4090.57 MHz, 06-8c-01
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PT,AVX512CD,SHA,AVX512BW,AVX512VL,AVX512VBMI,UMIP,PKU,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 48KB 64b/line 12-way D-cache, 32KB 64b/line 8-way I-cache, 1MB 64b/line
20-way L2 cache, 12MB 64b/line 12-way L3 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xc0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PC00)
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus 164 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (RP09)
acpiprt11 at acpi0: bus -1 (RP10)
acpiprt12 at acpi0: bus -1 (RP11)
acpiprt13 at acpi0: bus 165 (RP12)
acpiprt14 at acpi0: bus -1 (RP13)
acpiprt15 at acpi0: bus -1 (RP14)
acpiprt16 at acpi0: bus -1 (RP15)
acpiprt17 at acpi0: bus -1 (RP16)
acpiprt18 at acpi0: bus -1 (RP17)
acpiprt19 at acpi0: bus -1 (RP18)
acpiprt20 at acpi0: bus -1 (RP19)
acpiprt21 at acpi0: bus -1 (RP20)
acpiprt22 at acpi0: bus -1 (RP21)
acpiprt23 at acpi0: bus -1 (RP22)
acpiprt24 at acpi0: bus -1 (RP23)
acpiprt25 at acpi0: bus -1 (RP24)
acpiprt26 at acpi0: bus 2 (TRP0)
acpiprt27 at acpi0: bus 83 (TRP1)
acpiec0 at acpi0
### AML PARSE ERROR (0xfffe662d): Undefined name: VSP1
error evaluating: \\_SB_.PC00.LPCB.ECDV.TSKN._STA
"INT3472" at acpi0 not configured
acpipci0 at acpi0 PC00: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
"INTC1043" at acpi0 not configured
### AML PARSE ERROR (0xfffe662d): Undefined name: VSP1
error evaluating: \\_SB_.PC00.LPCB.ECDV.TSKN._STA
"INTC1043" at acpi0 not configured
"ELAN2930" at acpi0 not configured
"DLL0945" at acpi0 not configured
"SONY362A" at acpi0 not configured
"SONY362A" at acpi0 not configured
"ACPI000E" at acpi0 not configured
pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000
0xfd6a0000/0x10000 0xfd690000/0x10000 irq 14, 360 pins
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL G8VCF6C" serial 563 type LiP oem "SMP"
"INTC1051" at acpi0 not configured
"INTC1040" at acpi0 not configured
"USBC000" at acpi0 not configured
tpm0 at acpi0 TPM_ 2.0 (TIS) addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpipwrres0 at acpi0: DBTP, resource for HS01
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: DRST
acpipwrres3 at acpi0: V0PR
acpipwrres4 at acpi0: V1PR
acpipwrres5 at acpi0: V2PR
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: TBT0, resource for TDM0, TRP0, TRP1
acpipwrres8 at acpi0: TBT1, resource for TDM1, TRP2, TRP3
acpipwrres9 at acpi0: D3C_, resource for TXHC, TDM0, TDM1, TRP0, TRP1, TRP2,
TRP3
acpicpu0 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1048 mwait.1@0x60), C2(200@253 mwait.1@0x31),
C1(1000@1 mwait.1), PSS
acpipwrres10 at acpi0: PIN_
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 4689 MHz: speeds: 2701, 2700, 2600, 2500, 2300, 2100,
1900, 1700, 1600, 1400, 1200, 1100, 900, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel Core 11G Host" rev 0x01
inteldrm0 at pci0 dev 2 function 0 "Intel Xe Graphics" rev 0x01
drm0 at inteldrm0
inteldrm0: msi, TIGERLAKE, gen 12
"Intel Core 11G DTT" rev 0x01 at pci0 dev 4 function 0 not configured
ppb0 at pci0 dev 6 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
nvme0 at pci1 dev 0 function 0 vendor "SK hynix", unknown product 0x174a rev
0x00: msix, NVMe 1.3
nvme0: PC711 NVMe SK hynix 512GB, firmware 41001131, serial CDA7N524910607D6E
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, PC711 NVMe SK hy, 4100>
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
ppb1 at pci0 dev 7 function 0 "Intel Core 11G PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 7 function 1 "Intel Core 11G PCIE" rev 0x01: msi
pci3 at ppb2 bus 83
"Intel Core 11G GNA" rev 0x01 at pci0 dev 8 function 0 not configured
"Intel Core 11G SRAM" rev 0x01 at pci0 dev 10 function 0 not configured
xhci0 at pci0 dev 13 function 0 "Intel Core 11G xHCI" rev 0x01: msi, xHCI 1.20
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Core 11G TBT" rev 0x01 at pci0 dev 13 function 2 not configured
xhci1 at pci0 dev 20 function 0 "Intel 500 Series xHCI" rev 0x20: msi, xHCI 1.20
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 500 Series Shared SRAM" rev 0x20 at pci0 dev 20 function 2 not configured
dwiic0 at pci0 dev 21 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 27
iic0 at dwiic0
ihidev0 at iic0 addr 0x10 gpio 321, vendor 0x4f3 product 0x2930, ELAN2930
ihidev0: 14 report ids
ims0 at ihidev0 reportid 1: 1 button, tip
wsmouse0 at ims0 mux 0
hid at ihidev0 reportid 2 not configured
hid at ihidev0 reportid 3 not configured
hid at ihidev0 reportid 4 not configured
hid at ihidev0 reportid 6 not configured
hid at ihidev0 reportid 10 not configured
hid at ihidev0 reportid 14 not configured
dwiic1 at pci0 dev 21 function 1 "Intel 500 Series I2C" rev 0x20: apic 2 int 40
iic1 at dwiic1
ihidev1 at iic1 addr 0x2c gpio 327, vendor 0x6cb product 0x76b1, DLL0945
ihidev1: 15 report ids
imt0 at ihidev1: clickpad, 5 contacts
wsmouse1 at imt0 mux 0
ims1 at ihidev1 reportid 2: 2 buttons
wsmouse2 at ims1 mux 0
hid at ihidev1 reportid 6 not configured
hid at ihidev1 reportid 7 not configured
hid at ihidev1 reportid 9 not configured
hid at ihidev1 reportid 10 not configured
hid at ihidev1 reportid 11 not configured
hid at ihidev1 reportid 12 not configured
hid at ihidev1 reportid 13 not configured
hid at ihidev1 reportid 14 not configured
hid at ihidev1 reportid 15 not configured
"Intel 500 Series HECI" rev 0x20 at pci0 dev 22 function 0 not configured
dwiic2 at pci0 dev 25 function 0 "Intel 500 Series I2C" rev 0x20: apic 2 int 31
iic2 at dwiic2
dwiic3 at pci0 dev 25 function 1 "Intel 500 Series I2C" rev 0x20: apic 2 int 32
iic3 at dwiic3
ppb3 at pci0 dev 28 function 0 "Intel 500 Series PCIE" rev 0x20: msi
pci4 at ppb3 bus 164
rtsx0 at pci4 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb4 at pci0 dev 29 function 0 "Intel 500 Series PCIE" rev 0x20: msi
pci5 at ppb4 bus 165
iwx0 at pci5 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix
pcib0 at pci0 dev 31 function 0 "Intel 500 Series eSPI" rev 0x20
azalia0 at pci0 dev 31 function 3 "Intel 500 Series HD Audio" rev 0x20: msi
azalia0: codecs: Realtek ALC299, Intel/0x2812, using Realtek ALC299
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 500 Series SMBus" rev 0x20: apic 2 int
16
iic4 at ichiic0
"Intel 500 Series SPI" rev 0x20 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse3 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub2 at uhub0 port 4 configuration 1 interface 0 "Microchip USB7206 Smart Hub"
rev 3.20/6.25 addr 2
uhub3 at uhub2 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub"
rev 3.00/d.a1 addr 3
uhub4 at uhub2 port 4 configuration 1 interface 0 "Microchip USB7216 Smart Hub"
rev 3.20/1.91 addr 4
ure0 at uhub4 port 3 configuration 1 interface 0 "Realtek USB 10/100/1000 LAN"
rev 3.20/33.00 addr 5
ure0: , unknown ver 7420, address c8:4b:d6:af:a7:8d
ukphy0 at ure0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI
0x000732, model 0x0004
uvideo0 at uhub1 port 3 configuration 1 interface 0 "CN09357G8LG0017QA9T6A01
Integrated_Webcam_HD" rev 2.01/80.08 addr 2
video0 at uvideo0
uhub5 at uhub1 port 4 configuration 1 interface 0 "Microchip USB4206 Smart Hub"
rev 2.10/6.25 addr 3
uvideo1 at uhub5 port 1 configuration 1 interface 0 "Logitech HD Pro Webcam
C920" rev 2.10/0.0c addr 4
video1 at uvideo1
uaudio0 at uhub5 port 1 configuration 1 interface 3 "Logitech HD Pro Webcam
C920" rev 2.10/0.0c addr 4
uaudio0: class v1, high-speed, sync, channels: 0 play, 2 rec, 2 ctls
audio1 at uaudio0
uhidev0 at uhub5 port 2 configuration 1 interface 0 "Logitech MX518 Gaming
Mouse" rev 2.00/40.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse4 at ums0 mux 0
uhidev1 at uhub5 port 2 configuration 1 interface 1 "Logitech MX518 Gaming
Mouse" rev 2.00/40.00 addr 5
uhidev1: iclass 3/0, 17 report ids
uhidpp0 at uhidev1
ukbd0 at uhidev1 reportid 1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
ucc0 at uhidev1 reportid 3: 652 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhub6 at uhub5 port 3 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/d.a0 addr 6
uhidev2 at uhub6 port 4 configuration 1 interface 0 "Metadot - Das Keyboard Das
Keyboard" rev 2.00/1.00 addr 7
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev3 at uhub6 port 4 configuration 1 interface 1 "Metadot - Das Keyboard Das
Keyboard" rev 2.00/1.00 addr 7
uhidev3: iclass 3/0, 3 report ids
uhid1 at uhidev3 reportid 1: input=0, output=0, feature=7
uhid2 at uhidev3 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev3 reportid 3: 24 usages, 13 keys, enum
wskbd4 at ucc1 mux 1
uhub7 at uhub5 port 4 configuration 1 interface 0 "Microchip USB4216 Smart Hub"
rev 2.10/1.91 addr 8
ugen0 at uhub7 port 5 "Microchip Tech USB2 Controller Hub" rev 2.01/2.07 addr 9
uhidev4 at uhub5 port 5 configuration 1 interface 1 "Microchip Tech USB2
Controller Hub" rev 2.01/6.25 addr 10
uhidev4: iclass 3/0
uhid3 at uhidev4: input=64, output=64, feature=0
ugen1 at uhub5 port 5 configuration 1 "Microchip Tech USB2 Controller Hub" rev
2.01/6.25 addr 10
uhidev5 at uhub1 port 6 configuration 1 interface 0 "Yubico YubiKey
OTP+FIDO+CCID" rev 2.00/5.43 addr 11
uhidev5: iclass 3/1
ukbd2 at uhidev5: 8 variable keys, 6 key codes
wskbd5 at ukbd2 mux 1
uhidev6 at uhub1 port 6 configuration 1 interface 1 "Yubico YubiKey
OTP+FIDO+CCID" rev 2.00/5.43 addr 11
uhidev6: iclass 3/0
fido0 at uhidev6: input=64, output=64, feature=0
ugen2 at uhub1 port 6 configuration 1 "Yubico YubiKey OTP+FIDO+CCID" rev
2.00/5.43 addr 11
umodem0 at uhub1 port 9 configuration 1 interface 0 "HTMicroelectronics Goodix
Fingerprint Device" rev 2.00/1.00 addr 12
umodem0: data interface 1, has no CM over data, has no break
umodem0: status change notification available
ucom0 at umodem0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 471045MB, 512 bytes/sector, 964701698 sectors
root on sd1a (cbe0d0458386a175.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wskbd5: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwx0: hw rev 0x340, fw 67.8f59b80b.0, address 14:85:7f:f1:19:86
drm:pid5539:intel_dp_aux_wait_done *ERROR* [drm] *ERROR* AUX USBC3/DDI TC3/PHY
TC3: did not complete or timeout within 10ms (status 0xac1003ff)
----------------------------------------------------------------------
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
