Hi Mark,
On Sat, Jul 04, 2020 at 05:39:26PM +0200, Mark Kettenis wrote:
| > Is there something else I should have or do?
|
| Yes. You need to actually install the firmware onto the uSD card or
| USB device that your Pi boots from. At this point there is no easy
| way to do that though.
Well, these bits are on the uSD card that's in the slot on the
front(?) of the machine. I simply wrote the latest miniroot67.img to
another uSD card and swapped it with the previous one. Now I need to
specify that I want to boot from the USB stick on the OpenBSD boot
prompt (as previously I didn't have an sd0 for the uSD), but it boots
fine and I now have four CPU cores (and it reboots without issue, as
you mentioned).
Thanks!
Paul
OpenBSD 6.7-current (GENERIC.MP) #700: Sat Jul 4 13:14:53 MDT 2020
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 957657088 (913MB)
avail mem = 895942656 (854MB)
random: good seed from bootblocks
mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20200400
apm0 at mainbus0
simplefb0 at mainbus0: 656x416, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
"system" at mainbus0 not configured
"axi" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
bcmclock0 at simplebus0
bcmmbox0 at simplebus0
bcmgpio0 at simplebus0
bcmaux0 at simplebus0
bcmintc0 at simplebus0
bcmdog0 at simplebus0
bcmrng0 at simplebus0
pluart0 at simplebus0: console
bcmsdhost0 at simplebus0: 250 MHz base clock
sdmmc0 at bcmsdhost0: 4-bit, sd high-speed, mmc high-speed, dma
"dsi" at simplebus0 not configured
dwctwo0 at simplebus0
bcmtemp0 at simplebus0
"local_intc" at simplebus0 not configured
sdhc0 at simplebus0
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc0: 4-bit, sd high-speed, mmc high-speed
simplebus1 at simplebus0: "firmware"
"expgpio" at simplebus1 not configured
"power" at simplebus0 not configured
"mailbox" at simplebus0 not configured
"gpiomem" at simplebus0 not configured
"fb" at simplebus0 not configured
"vcsm" at simplebus0 not configured
"virtgpio" at simplebus0 not configured
simplebus2 at mainbus0: "clocks"
"clock" at simplebus2 not configured
"clock" at simplebus2 not configured
"phy" at mainbus0 not configured
"arm-pmu" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 19200 KHz
"leds" at mainbus0 not configured
"fixedregulator_3v3" at mainbus0 not configured
"fixedregulator_5v0" at mainbus0 not configured
usb0 at dwctwo0: USB revision 2.0
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SA04G, 0004> removable
sd0: 3776MB, 512 bytes/sector, 7733248 sectors
uhub0 at usb0 configuration 1 interface 0 "Broadcom DWC2 root hub" rev
2.00/1.00 addr 1
uhub1 at uhub0 port 1 configuration 1 interface 0 "Standard Microsystems
product 0x9514" rev 2.00/2.00 addr 2
bwfm0 at sdmmc1 function 1
manufacturer 0x02d0, product 0xa9a6 at sdmmc1 function 2 not configured
smsc0 at uhub1 port 1 configuration 1 interface 0 "Standard Microsystems
SMSC9512/14" rev 2.00/2.00 addr 3
smsc0: address b8:27:eb:93:42:d5
ukphy0 at smsc0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x0001f0, model 0x000c
urtwn0 at uhub1 port 2 configuration 1 interface 0 "Realtek 802.11n NIC" rev
2.00/0.00 addr 4
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address ec:08:6b:07:c2:1c
umass0 at uhub1 port 4 configuration 1 interface 0 "SanDisk Ultra Fit" rev
2.10/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable
serial.07815583320220107303
sd1: 29327MB, 512 bytes/sector, 60062500 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd1a:/bsd
boot device: sd1
root on sd1a (59de83c8e783b811.a) swap on sd1b dump on sd1b
WARNING: CHECK AND RESET THE DATE!
gpio0 at bcmgpio0: 54 pins
bwfm0: address b8:27:eb:c6:17:80
| > | Anyway, I think the problem is that OF_finddevice() returns -1 if the
| > | node can't be found. Does the following diff help?
| >
| > It does allow the system to boot to multiuser (so the data_abort+0x68
| > is gone). The 'failed to spin up' lines now show up a lot earlier in
| > dmesg, after cpu0 attaches. See below for full dmesg.
| >
| > For completeness, the machine still doesn't shutdown properly (need to
| > powercycle it to bring it back).
|
| That's a side-effect of the failure to spin up the secondary CPUs.
|
|
| >
| > Cheers,
| >
| > Paul
| >
| > OpenBSD 6.7-current (GENERIC.MP) #2: Sat Jul 4 17:12:49 CEST 2020
| > we...@pie.alm.weirdnet.nl:/usr/src/sys/arch/arm64/compile/GENERIC.MP
| > real mem = 953442304 (909MB)
| > avail mem = 891834368 (850MB)
| > random: good seed from bootblocks
| > mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
| > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
| > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
| > cpu0: 512KB 64b/line 16-way L2 cache
| > cpu1 at mainbus0 mpidr 1: failed to spin up
| > cpu2 at mainbus0 mpidr 2: failed to spin up
| > cpu3 at mainbus0 mpidr 3: failed to spin up
| > efi0 at mainbus0: UEFI 2.0.5
| > efi0: Das U-boot rev 0x0
| > apm0 at mainbus0
| > simplefb0 at mainbus0: 656x416, 32bpp
| > wsdisplay0 at simplefb0 mux 1
| > wsdisplay0: screen 0-5 added (std, vt100 emulation)
| > "system" at mainbus0 not configured
| > "axi" at mainbus0 not configured
| > simplebus0 at mainbus0: "soc"
| > bcmdmac0 at simplebus0: DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
| > bcmintc0 at simplebus0
| > bcmmbox0 at simplebus0
| > bcmgpio0 at simplebus0
| > syscon0 at simplebus0: "syscon"
| > bcmdog0 at simplebus0
| > bcmrng0 at simplebus0
| > pluart0 at simplebus0
| > bcmsdhost0 at simplebus0: 250 MHz base clock
| > sdmmc0 at bcmsdhost0: 4-bit, sd high-speed, mmc high-speed, dma
| > com0 at simplebus0: ns16550, no working fifo
| > com0: console
| > "mmc" at simplebus0 not configured
| > dwctwo0 at simplebus0
| > "firmware" at simplebus0 not configured
| > "power" at simplebus0 not configured
| > "leds" at simplebus0 not configured
| > "fb" at simplebus0 not configured
| > "vchiq" at simplebus0 not configured
| > "thermal" at simplebus0 not configured
| > "local_intc" at simplebus0 not configured
| > "arm-pmu" at simplebus0 not configured
| > "gpiomem" at simplebus0 not configured
| > agtimer0 at simplebus0: tick rate 19200 KHz
| > "virtgpio" at simplebus0 not configured
| > simplebus1 at mainbus0: "clocks"
| > "clock" at simplebus1 not configured
| > "clock" at simplebus1 not configured
| > "clock" at simplebus1 not configured
| > "clock" at simplebus1 not configured
| > "clock" at simplebus1 not configured
| > "clock" at simplebus1 not configured
| > "clock" at simplebus1 not configured
| > usb0 at dwctwo0: USB revision 2.0
| > sdmmc0: can't enable card
| > uhub0 at usb0 configuration 1 interface 0 "Broadcom DWC2 root hub" rev
2.00/1.00 addr 1
| > uhub1 at uhub0 port 1 configuration 1 interface 0 "Standard Microsystems
product 0x9514" rev 2.00/2.00 addr 2
| > smsc0 at uhub1 port 1 configuration 1 interface 0 "Standard Microsystems
SMSC9512/14" rev 2.00/2.00 addr 3
| > smsc0: address b8:27:eb:93:42:d5
| > ukphy0 at smsc0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x0001f0, model 0x000c
| > urtwn0 at uhub1 port 2 configuration 1 interface 0 "Realtek 802.11n NIC"
rev 2.00/0.00 addr 4
| > urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address ec:08:6b:07:c2:1c
| > umass0 at uhub1 port 4 configuration 1 interface 0 "SanDisk Ultra Fit" rev
2.10/1.00 addr 5
| > umass0: using SCSI over Bulk-Only
| > scsibus0 at umass0: 2 targets, initiator 0
| > sd0 at scsibus0 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable
serial.07815583320220107303
| > sd0: 29327MB, 512 bytes/sector, 60062500 sectors
| > vscsi0 at root
| > scsibus1 at vscsi0: 256 targets
| > softraid0 at root
| > scsibus2 at softraid0: 256 targets
| > bootfile: sd0a:/bsd
| > boot device: sd0
| > root on sd0a (59de83c8e783b811.a) swap on sd0b dump on sd0b
| > WARNING: CHECK AND RESET THE DATE!
| > gpio0 at bcmgpio0: 54 pins
| >
| > |
| > | Index: arch/arm64/dev/mainbus.c
| > | ===================================================================
| > | RCS file: /cvs/src/sys/arch/arm64/dev/mainbus.c,v
| > | retrieving revision 1.17
| > | diff -u -p -r1.17 mainbus.c
| > | --- arch/arm64/dev/mainbus.c 17 Jun 2020 08:00:22 -0000 1.17
| > | +++ arch/arm64/dev/mainbus.c 3 Jul 2020 22:16:43 -0000
| > | @@ -316,7 +316,7 @@ mainbus_attach_cpus(struct device *self,
| > | int acells, scells;
| > | char buf[32];
| > |
| > | - if (node == 0)
| > | + if (node == -1)
| > | return;
| > |
| > | acells = sc->sc_acells;
| > | @@ -369,7 +369,7 @@ mainbus_attach_psci(struct device *self)
| > | struct mainbus_softc *sc = (struct mainbus_softc *)self;
| > | int node = OF_finddevice("/psci");
| > |
| > | - if (node == 0)
| > | + if (node == -1)
| > | return;
| > |
| > | sc->sc_early = 1;
| > | @@ -384,7 +384,8 @@ mainbus_attach_efi(struct device *self)
| > | struct fdt_attach_args fa;
| > | int node = OF_finddevice("/chosen");
| > |
| > | - if (node == 0 || OF_getproplen(node, "openbsd,uefi-system-table") <= 0)
| > | + if (node == -1 ||
| > | + OF_getproplen(node, "openbsd,uefi-system-table") <= 0)
| > | return;
| > |
| > | memset(&fa, 0, sizeof(fa));
| > |
| >
| > --
| > >++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
| > +++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
| > http://www.weirdnet.nl/
| >
|
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
