>Synopsis: Need modified dtb and u-boot files (from NetBSD) to boot
>Category: system, arm, arm64, aarch64
>Environment:
System : OpenBSD 6.7
Details : OpenBSD 6.7-beta (GENERIC.MP) #557: Sun Apr 12 20:59:24
MDT 2020
[email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
Architecture: OpenBSD.arm64
Machine : arm64
>Description:
1. The machine (Pinebook 11" 1080p) does not from SD-card. No output
either on the screen of on the serial console,
not even from U-Boot.
2. The left USB port doesn't work. It does under NetBSD. I have
yet failed to come up with a solution.
3. I can provide the necessary files (*.dtb, u-boot*.bin)
upon request
>How-To-Repeat:
Turn off the machine, hit the power switch :)
>Fix:
The machine does not boot, unless the following changes
are made to the SD-Card:
1. dd if=miniroot67.fs of=/dev/rsd0c bs=1m conv=sync
2. dd if=u-boot-sunxi-with-spl.bin of=/dev/rsd0c bs=1024 seek=8
conv=sync
3. mount /dev/sd0i /mnt
4. mkdir /mnt/vendor
5. cp sun50i-a64-pinebook.dtb /mnt/vendor
6. umount /mnt
7. reboot
8. At the OpenBSD bootloader prompt interrupt the boot
process and enter:
- set tty fb0
- boot
9. I can provide the necessary files (*.dtb, u-boot*.bin)
upon request
dmesg:
OpenBSD 6.7-beta (GENERIC.MP) #557: Sun Apr 12 20:59:24 MDT 2020
[email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 2015813632 (1922MB)
avail mem = 1923813376 (1834MB)
mainbus0 at root: Pinebook
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x20181100
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
"osc24M_clk" at mainbus0 not configured
"osc32k_clk" at mainbus0 not configured
"internal-osc-clk" at mainbus0 not configured
"sound_spdif" at mainbus0 not configured
"spdif-out" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
sxisid0 at simplebus0
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller"
sxirtc0 at simplebus0
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sxirsb0 at simplebus0
axppmic0 at sxirsb0 addr 0x3a3: AXP803
"de2" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
sximmc1 at simplebus0
sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
sximmc2 at simplebus0
sdmmc2 at sximmc2: 8-bit, sd high-speed, mmc high-speed, dma
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci0 at simplebus0: version 1.0
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci1 at simplebus0: version 1.0
com0 at simplebus0sxiccmu_ccu_reset: 0x0000002e
: ns16550, no working fifo
sxipwm0 at simplebus0
"hdmi-phy" at simplebus0 not configured
"interrupt-controller" at simplebus0 not configured
sxitwi0 at simplebus0
iic0 at sxitwi0
"analogix,anx6345" at iic0 addr 0x38 not configured
sxidog0 at simplebus0
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00
addr 1
"regulator" at mainbus0 not configured
pwmbl0 at mainbus0
"gpio_keys" at mainbus0 not configured
"vcc3v3" at mainbus0 not configured
"wifi_pwrseq" at mainbus0 not configured
simplefb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
manufacturer 0x024c, product 0xb703 at sdmmc1 function 1 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SN64G, 0080> removable
sd0: 60906MB, 512 bytes/sector, 124735488 sectors
scsibus1 at sdmmc2: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Samsung, AJTD4R, 0000> removable
sd1: 14910MB, 512 bytes/sector, 30535680 sectors
uhub4 at uhub1 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/88.32 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "HAILUCK CO.,LTD USB
KEYBOARD" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "HAILUCK CO.,LTD USB
KEYBOARD" rev 1.10/1.00 addr 3
uhidev1: iclass 3/0, 9 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
uhid3 at uhidev1 reportid 6: input=0, output=0, feature=255
uhid4 at uhidev1 reportid 9: input=1, output=0, feature=0
uvideo0 at uhub4 port 3 configuration 1 interface 0 "Generic USB2.0 PC CAMERA"
rev 2.00/1.00 addr 4
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (aebd3abcef6b3a90.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
usbdevs:
Controller /dev/usb0:
addr 01: 0000:0000 Generic, EHCI root hub
high speed, self powered, config 1, rev 1.00
driver: uhub0
Controller /dev/usb1:
addr 01: 0000:0000 Generic, EHCI root hub
high speed, self powered, config 1, rev 1.00
driver: uhub1
addr 02: 05e3:0608 Genesys Logic, USB2.0 Hub
high speed, self powered, config 1, rev 88.32
driver: uhub4
addr 03: 258a:000c HAILUCK CO.,LTD, USB KEYBOARD
low speed, power 100 mA, config 1, rev 1.00
driver: uhidev0
driver: uhidev1
addr 04: 1908:2311 Generic, USB2.0 PC CAMERA
high speed, power 256 mA, config 1, rev 1.00
driver: uvideo0
addr 05: 17ef:7205 Lenovo, Thinkpad USB LAN
high speed, power 180 mA, config 2, rev 30.00, iSerial 000001000000
driver: cdce0
Controller /dev/usb2:
addr 01: 0000:0000 Generic, OHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub2
Controller /dev/usb3:
addr 01: 0000:0000 Generic, OHCI root hu
full speed, self powered, config 1, rev 1.00
driver: uhub3
pcidump:
acpidump:
