I'm very sorry about that, I forgot to include that information. The problem
was happening on 6.6-stable on amd64.
I upgraded the test machine using sysupgrade -s now, but the problem is still
there.
Attaching dmesg and dmesg.boot.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Sunday, 26 January 2020 22:54, Klemens Nanni <[email protected]> wrote:
> Which version? Which platform? Your report is useless whithout proper
> information, see https://www.openbsd.org/report.html
>
> Tracey Emery fixed a very similar issue just recently, please try an
> up-to-date snapshot and resend a proper report in case the problem still
> exists.
OpenBSD 6.6-current (GENERIC) #600: Sun Jan 26 02:05:35 MST 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1056899072 (1007MB)
avail mem = 1012535296 (965MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Ryzen 5 2600X Six-Core Processor, 3602.93 MHz, 17-08-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,MMXX,FFXSR,RDTSCP,LONG,LAHF,AMCR8,ABM,SSE4A,MASSE,3DNOWP,ITSC,FSGSBASE,AVX2,RDSEED,CLFLUSHOPT
cpu0: 64KB 64b/line 4-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
8-way L2 cache, 16MB 64b/line 16-way L3 cache
cpu0: ITLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 999MHz
cpu0: mwait min=64, max=64
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
0xcf8 - 0xcff
0x10000 - 0xffffffff
extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
0x0 - 0x9ffff
0xc0000 - 0x3fffffff
0xfe000000 - 0xffffffffffffffff
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: GFX0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 51200MB, 104857600 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 1 int 19, address
08:00:27:aa:2e:69
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not
configured
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 1 int 23
iic0 at piixpm0
em1 at pci0 dev 8 function 0 "Intel 82540EM" rev 0x02: apic 1 int 16, address
08:00:27:c3:81:e8
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (7f2efd858aeb812d.a) swap on wd0b dump on wd0b
OpenBSD 6.6-current (GENERIC) #600: Sun Jan 26 02:05:35 MST 2020
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1056899072 (1007MB)
avail mem = 1012535296 (965MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Ryzen 5 2600X Six-Core Processor, 3602.93 MHz, 17-08-02
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,MMXX,FFXSR,RDTSCP,LONG,LAHF,AMCR8,ABM,SSE4A,MASSE,3DNOWP,ITSC,FSGSBASE,AVX2,RDSEED,CLFLUSHOPT
cpu0: 64KB 64b/line 4-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
8-way L2 cache, 16MB 64b/line 16-way L3 cache
cpu0: ITLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 999MHz
cpu0: mwait min=64, max=64
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
0xcf8 - 0xcff
0x10000 - 0xffffffff
extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
0x0 - 0x9ffff
0xc0000 - 0x3fffffff
0xfe000000 - 0xffffffffffffffff
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: GFX0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 51200MB, 104857600 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 1 int 19, address
08:00:27:aa:2e:69
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not
configured
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 1 int 23
iic0 at piixpm0
em1 at pci0 dev 8 function 0 "Intel 82540EM" rev 0x02: apic 1 int 16, address
08:00:27:c3:81:e8
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (7f2efd858aeb812d.a) swap on wd0b dump on wd0b
