>Synopsis: The system crashed when the system was shutting down because
>the CPU was overheating
>Category: ???
>Environment:
System : OpenBSD 6.2
Details : OpenBSD 6.2-current (GENERIC.MP) #220: Fri Nov 17
11:47:01 MST 2017
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
I was compiling a port (tor-browser) when the system decided to stop
because the CPU was overheating.
Here is the result of the show panic, show registers, trace, and ps
commands :
error: [drm:pid34966:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe A
acpitz0: critical temperature exceeded 100C, shutting down
acpitz0: critical temperature exceeded 101C, shutting down
acpitz0: critical temperature exceeded 101C, shutting down
acpitz0: critical temperature exceeded 128C, shutting down
--- stopping package daemons: tor ---
acpitz0: critical temperature exceeded 128C, shutting down
syncing disks... uvm_fault(0xffffff01367e4000, 0x18, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at handle_workitem_freeblocks+0x39: cmpq $0x1, 0x18(%rax)
ddb{0}> show panic
the kernel did not panic
ddb{0}> show registers
rdi 0xffffff011e2f7958
rsi 0
rbp 0xffff800032a83090
rbx 0xffffff0118c34d90
rdx 0xfe00000003ff1a02
rcx 0x1
rax 0
r8 0
r9 0xffff800032b05920
r10 0x1
r12 0
r11 0xffff800000bc0600
r12 0
r13 0xffff800000bc0600
r14 0xffffff011e2f7958
r15 0xffff800000351000
rip 0xffffffff813aa4d9 handle_workitem_freeblocks+0x39
cs 0x8
rflags 0x10286 __ALIGN_SIZE+0xf286
rsp 0xffff800032a82e50
ss 0x10
handle_workitem_freeblocks+0x39: cmpq $0x1,0x18(%rax)
ddb{0}> trace
handle_workitem_freeblocks(ffff800000351000) at handle_workitem_freeblocks+0x39
process_worklist_item(ffff800032a84000,ffff8000000351000) at
process_worklist_item+0x1e9
softdep_process_worklist(ffff800032a8331c) at softdep_process_worklist+0xea
softdep_flushworklist(ffff800032a84000,1,ffff80000bc0600) at
softdep_flushworklist+0x93
ffs_sync(80000,ffff800000351000,0,ffff800032a84000) at ffs_sync+0xb3
doumount_leaf(ffff8000000351040,0,0) at doumount_leaf+0x68
doumount(ffff800000351040,ffff800000351000,ffff8000000350800) at doumount+0xea
vfs_umountall() at vfs_unmountall+0x9d
vfs_shutdown() at vfs_shuftdown+0x3e
boot(0) at boot+0x49
reboot(ffff8000032a834c0) at reboot+0x4f
sys_reboot(ffff800032a84000,ffffffff81a9b180,ffffffff815fa7ec) at
sys_reboot+0x5c
syscall() at syscall+0x279
--- syscall (number 55) ---
end of kernel
end trace frame: 0x7f7ffffc18b0, count: -13
0x1a887050b0aa:
ddb{0}> ps
FLAGS WAIT COMMAND
0x14200 zerothread
0x14200 aiodoned aiodoned
0x14200 syncer update
0x14200 cleaner cleaner
0x14200 reaper reaper
0x14200 pgdaemon pagedaemon
0x14200 bored srdis
0x14200 bored crynlk
0x14200 bored crypto
0x14200 usbtsk usbtalk
0x14200 usbatsk usbtask
0x14200 bored i915-hangcheck
0x14200 bored i915-dp
0x14200 bored i915
0x40014200 acpi0 acpi0
0x40014200 idle3
0x40014200 idle2
0x40014200 idle1
0x14200 bored sensors
0x14200 softnet
0x14200 bored systqmp
0x14200 bored systq
0x40014200 bored softclock
0x40014200 idle0
0x14200 bored sbar
0x2 init
0x10200 scheduler swapper
After that I typed :
ddb{0}> boot dump
dumping to dev 4,17 off 492583
dump
But the system froze and I had to reboot it manually.
Though it isn't the first time my computer had to reboot because it was
overheating (I was testing the stress(1) package), it is the first time
it crashed like this.
Is there anything I can do to help debug this? Is it debugable? It is
worth spending time to debug it?
Best,
dmesg:
OpenBSD 6.2-current (GENERIC.MP) #220: Fri Nov 17 11:47:01 MST 2017
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4062691328 (3874MB)
avail mem = 3932659712 (3750MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET47WW (1.17 )" date 07/14/2010
bios0: LENOVO 3680BA5
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT TCPA DMAR
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4) EXP3(S4)
EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.41 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 2394006268 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 2394002459 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C2(500@205 mwait.3@0x10),
C1(1000@3 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0018" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "42T4837" serial 50934 type LION oem "LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2400, 2399, 2266, 2133, 1999, 1866,
1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x800, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 3400 KT" rev 0x06: ports: 1 com
com4 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x06: msi, address
f0:de:f1:11:3c:7e
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci1 at ppb0 bus 13
ppb1 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb2 bus 2
iwn0 at pci3 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x35: msi,
MIMO 3T3R, MoW, address 00:24:d7:46:03:bc
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci4 at ppb3 bus 14
pcib0 at pci0 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1600BEKT-0, 02.0> SCSI3 0/direct
fixed naa.50014ee2059f90bd
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4, 0x1e0b1 0xb40000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
pci5 at mainbus0 bus 255
pchb1 at pci5 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb2 at pci5 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb3 at pci5 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb4 at pci5 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb5 at pci5 dev 2 function 2 "Intel Reserved" rev 0x02
pchb6 at pci5 dev 2 function 3 "Intel Reserved" rev 0x02
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/23.45 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 152624MB, 512 bytes/sector, 312575168 sectors
root on sd1a (23e691dd1ff29ca6.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching Hub(0x0020),
Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 addr 3: full speed, power 100 mA, config 1, Biometric
Coprocessor(0x2016), UPEK(0x147e), rev 0.02
port 4 powered
port 5 powered
port 6 addr 4: high speed, power 200 mA, config 1, Integrated Camera(0x4816),
Chicony Electronics Co., Ltd.(0x17ef), rev 23.45
port 2 powered
port 3 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching Hub(0x0020),
Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
port 2 powered
port 3 powered
