On 2016/01/29 16:57, Lars Noodén wrote: > I'm getting frequent panics from the snapshot OpenBSD 5.9-beta > (GENERIC) #1536: Thu Jan 28 20:18:35 MST 2016 on a Soekris Net5501. > > It seems to happen when I connect physically via ethernet. Normally I > have dhcpd running but even if I kill that first, just plugging the > cable in seems to cause the panic. Below are console output, ddb > trace, ddb ps and the dmesg.
I'm not sure exactly which code is in current snaps, please build a new kernel from up-to-date current source and see if it recurs. > Regards, > Lars > > # panic: kernel diagnostic assertion "pd.m->m_pkthdr.pf.statekey == > NULL" failed: file "../../../../net/pf.c", line 6569 > Stopped at Debugger+0x7: leave > TID PID UID PRFLAGS PFLAGS CPU COMMAND > *18936 18936 0 0x14000 0x210 0 softnet > Debugger(d09feb68,f523fd14,d09d9764,f523fd14,d6057b00) at Debugger+0x7 > panic(d09d9764,d0957746,d09cf8c8,d09cf988,19a9) at panic+0x71 > __assert(d0957746,d09cf988,19a9,d09cf8c8,0) at __assert+0x2e > pf_test(2,1,d1abd800,f523fe90,d0b56680) at pf_test+0xf2d > ipv4_input(d6057b00,d0203028,60,f523fecc,d041c580) at ipv4_input+0x23e > ipintr(d041c580,56ab7825,0,f523fec8,d177cbc0) at ipintr+0x16 > netintr(0,d0b56680,d5e01700,f523ff0c,d03b8482) at netintr+0x62 > softintr_dispatch(1) at softintr_dispatch+0x5a > Xsoftnet() at Xsoftnet+0x12 > --- interrupt --- > uvm_fault(0xd0bbe100, 0x0, 0, 1) -> e > kernel: page fault trap, code=0 > Stopped at db_read_bytes+0x17: movzbl 0(%esi,%ecx,1),%eax > TID PID UID PRFLAGS PFLAGS CPU COMMAND > *18936 18936 0 0x14000 0x210 0 softnet > db_read_bytes(3,4,f523fae8,d0b52180,ffffffff) at db_read_bytes+0x17 > db_get_value(3,4,0,d03cbe95,d09feb68) at db_get_value+0x38 > db_numargs(ffffffff,f523fb80,0,3,d03cbe70) at db_numargs+0x24 > db_stack_trace_print(d0558f07,0,5,d09cb91a,d03cbe70) at > db_stack_trace_print+0x > 3a7 > db_trap(1,0,58,a,5) at db_trap+0xd2 > kdb_trap(1,0,f523fc78,f523fcd4,0) at kdb_trap+0xcc > trap() at trap+0x2a5 > --- trap (number 1) --- > Bad frame pointer: 0xd09d9764 > "net5501.dhcp.inet.fi" 16:32 29-Jan-16 > 0: > http://www.openbsd.org/ddb.html describes the minimum info required in bug > reports. Insufficient info makes it difficult to find and fix bugs. > > ddb> trace > db_read_bytes(3,4,f523fae8,d0b52180,ffffffff) at db_read_bytes+0x17 > db_get_value(3,4,0,d03cbe95,d09feb68) at db_get_value+0x38 > db_numargs(ffffffff,f523fb80,0,3,d03cbe70) at db_numargs+0x24 > db_stack_trace_print(d0558f07,0,5,d09cb91a,d03cbe70) at > db_stack_trace_print+0x > 3a7 > db_trap(1,0,58,a,5) at db_trap+0xd2 > kdb_trap(1,0,f523fc78,f523fcd4,0) at kdb_trap+0xcc > trap() at trap+0x2a5 > --- trap (number 1) --- > Bad frame pointer: 0xd09d9764 > 0: > > ddb> ps > TID PPID PGRP UID S FLAGS WAIT COMMAND > 23954 30431 23954 1000 3 0x100083 ttyin ksh > 30431 8219 8219 1000 3 0x90 select sshd > 8219 6698 8219 0 3 0x92 poll sshd > 26385 15218 26385 0 3 0x100083 ttyin ksh > 15218 1 15218 0 3 0x100080 kqread tmux > 3685 7798 3685 0 3 0x100083 kqread tmux > 7798 1 7798 0 3 0x10008b pause ksh > 5022 1 5022 0 3 0x100098 poll cron > 22234 12425 12425 74 3 0x100090 bpf pflogd > 12425 1 12425 0 3 0x80 netio pflogd > 26320 1 26320 0 3 0x100080 poll ntpd > 10186 6497 10186 83 3 0x100090 poll ntpd > 6497 1 6497 83 3 0x100090 poll ntpd > 8180 1 8180 77 3 0x100090 poll dhclient > 20082 1 20082 0 3 0x80 poll dhclient > 3112 1 3112 99 3 0x100090 poll sndiod > 30808 1 30808 110 3 0x100090 poll sndiod > 15178 1 15178 109 3 0x90 kqread ftp-proxy > 988 2777 2777 95 3 0x100090 kqread smtpd > 603 2777 2777 95 3 0x100090 kqread smtpd > 17455 2777 2777 95 3 0x100090 kqread smtpd > 24674 2777 2777 95 3 0x100090 kqread smtpd > 19851 2777 2777 95 3 0x100090 kqread smtpd > 2160 2777 2777 103 3 0x100090 kqread smtpd > 2777 1 2777 0 3 0x100080 kqread smtpd > 1609 1 1609 77 3 0x100090 poll dhcpd > 6698 1 6698 0 3 0x80 select sshd > 6268 11201 11821 83 3 0x100090 poll ntpd > 11201 11821 11821 83 3 0x100090 poll ntpd > 11821 1 11821 0 3 0x100080 poll ntpd > 24477 30672 30672 74 3 0x100090 bpf pflogd > 30672 1 30672 0 3 0x80 netio pflogd > 26659 16340 16340 73 3 0x100090 kqread syslogd > 16340 1 16340 0 3 0x100080 netio syslogd > 27309 0 0 0 3 0x14200 pgzero zerothread > 22001 0 0 0 3 0x14200 aiodoned aiodoned > 26836 0 0 0 3 0x14200 syncer update > 25182 0 0 0 3 0x14200 cleaner cleaner > 6836 0 0 0 3 0x14200 reaper reaper > 27523 0 0 0 3 0x14200 pgdaemon pagedaemon > 24875 0 0 0 3 0x14200 bored sensors > 16209 0 0 0 3 0x14200 bored srdis > 19127 0 0 0 3 0x14200 bored crypto > 14244 0 0 0 3 0x14200 pftm pfpurge > 20483 0 0 0 3 0x14200 usbtsk usbtask > 32332 0 0 0 3 0x14200 usbatsk usbatsk > *18936 0 0 0 7 0x14210 softnet > 17844 0 0 0 3 0x14200 bored systqmp > 4243 0 0 0 3 0x14200 bored systq > 22992 0 0 0 3 0x40014200 idle0 > 25905 0 0 0 3 0x14200 kmalloc kmthread > 1 0 1 0 3 0x82 wait init > 0 -1 0 0 3 0x10200 scheduler swapper > > > # dmesg > 1 at ohci0: USB revision 1.0 > uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > softraid0: sd0 was not shutdown properly > sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 0, 005> SCSI2 0/direct fixed > sd0: 6827MB, 512 bytes/sector, 13981696 sectors > root on wd0a (cd1ed40cc23f4dd4.a) swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > panic: kernel diagnostic assertion "pd.m->m_pkthdr.pf.statekey == > NULL" failed: file "../../../../net/pf.c", line 6569 > Stopped at Debugger+0x7: leave > TID PID UID PRFLAGS PFLAGS CPU COMMAND > *18936 18936 0 0x14000 0x210 0 softnet > Debugger(d09feb68,f523fd14,d09d9764,f523fd14,d6057b00) at Debugger+0x7 > panic(d09d9764,d0957746,d09cf8c8,d09cf988,19a9) at panic+0x71 > __assert(d0957746,d09cf988,19a9,d09cf8c8,0) at __assert+0x2e > pf_test(2,1,d1abd800,f523fe90,d0b56680) at pf_test+0xf2d > ipv4_input(d6057b00,d0203028,60,f523fecc,d041c580) at ipv4_input+0x23e > ipintr(d041c580,56ab7825,0,f523fec8,d177cbc0) at ipintr+0x16 > netintr(0,d0b56680,d5e01700,f523ff0c,d03b8482) at netintr+0x62 > softintr_dispatch(1) at softintr_dispatch+0x5a > Xsoftnet() at Xsoftnet+0x12 > --- interrupt --- > uvm_fault(0xd0bbe100, 0x0, 0, 1) -> e > kernel: page fault trap, code=0 > Stopped at db_read_bytes+0x17: movzbl 0(%esi,%ecx,1),%eax > TID PID UID PRFLAGS PFLAGS CPU COMMAND > *18936 18936 0 0x14000 0x210 0 softnet > db_read_bytes(3,4,f523fae8,d0b52180,ffffffff) at db_read_bytes+0x17 > db_get_value(3,4,0,d03cbe95,d09feb68) at db_get_value+0x38 > db_numargs(ffffffff,f523fb80,0,3,d03cbe70) at db_numargs+0x24 > db_stack_trace_print(d0558f07,0,5,d09cb91a,d03cbe70) at > db_stack_trace_print+0x3a7 > db_trap(1,0,58,a,5) at db_trap+0xd2 > kdb_trap(1,0,f523fc78,f523fcd4,0) at kdb_trap+0xcc > trap() at trap+0x2a5 > --- trap (number 1) --- > Bad frame pointer: 0xd09d9764 > 0: > http://www.openbsd.org/ddb.html describes the minimum info required in bug > reports. Insufficient info makes it difficult to find and fix bugs. > ddb> db_read_bytes(3,4,f523fae8,d0b52180,ffffffff) at db_read_bytes+0x17 > db_get_value(3,4,0,d03cbe95,d09feb68) at db_get_value+0x38 > db_numargs(ffffffff,f523fb80,0,3,d03cbe70) at db_numargs+0x24 > db_stack_trace_print(d0558f07,0,5,d09cb91a,d03cbe70) at > db_stack_trace_print+0x3a7 > db_trap(1,0,58,a,5) at db_trap+0xd2 > kdb_trap(1,0,f523fc78,f523fcd4,0) at kdb_trap+0xcc > trap() at trap+0x2a5 > --- trap (number 1) --- > Bad frame pointer: 0xd09d9764 > 0: > ddb> TID PPID PGRP UID S FLAGS WAIT COMMAND > 23954 30431 23954 1000 3 0x100083 ttyin ksh > 30431 8219 8219 1000 3 0x90 select sshd > 8219 6698 8219 0 3 0x92 poll sshd > 26385 15218 26385 0 3 0x100083 ttyin ksh > 15218 1 15218 0 3 0x100080 kqread tmux > 3685 7798 3685 0 3 0x100083 kqread tmux > 7798 1 7798 0 3 0x10008b pause ksh > 5022 1 5022 0 3 0x100098 poll cron > 22234 12425 12425 74 3 0x100090 bpf pflogd > 12425 1 12425 0 3 0x80 netio pflogd > 26320 1 26320 0 3 0x100080 poll ntpd > 10186 6497 10186 83 3 0x100090 poll ntpd > 6497 1 6497 83 3 0x100090 poll ntpd > 8180 1 8180 77 3 0x100090 poll dhclient > 20082 1 20082 0 3 0x80 poll dhclient > 3112 1 3112 99 3 0x100090 poll sndiod > 30808 1 30808 110 3 0x100090 poll sndiod > 15178 1 15178 109 3 0x90 kqread ftp-proxy > 988 2777 2777 95 3 0x100090 kqread smtpd > 603 2777 2777 95 3 0x100090 kqread smtpd > 17455 2777 2777 95 3 0x100090 kqread smtpd > 24674 2777 2777 95 3 0x100090 kqread smtpd > 19851 2777 2777 95 3 0x100090 kqread smtpd > 2160 2777 2777 103 3 0x100090 kqread smtpd > 2777 1 2777 0 3 0x100080 kqread smtpd > 1609 1 1609 77 3 0x100090 poll dhcpd > 6698 1 6698 0 3 0x80 select sshd > 6268 11201 11821 83 3 0x100090 poll ntpd > 11201 11821 11821 83 3 0x100090 poll ntpd > 11821 1 11821 0 3 0x100080 poll ntpd > 24477 30672 30672 74 3 0x100090 bpf pflogd > 30672 1 30672 0 3 0x80 netio pflogd > 26659 16340 16340 73 3 0x100090 kqread syslogd > 16340 1 16340 0 3 0x100080 netio syslogd > 27309 0 0 0 3 0x14200 pgzero zerothread > 22001 0 0 0 3 0x14200 aiodoned aiodoned > 26836 0 0 0 3 0x14200 syncer update > 25182 0 0 0 3 0x14200 cleaner cleaner > 6836 0 0 0 3 0x14200 reaper reaper > 27523 0 0 0 3 0x14200 pgdaemon pagedaemon > 24875 0 0 0 3 0x14200 bored sensors > 16209 0 0 0 3 0x14200 bored srdis > 19127 0 0 0 3 0x14200 bored crypto > 14244 0 0 0 3 0x14200 pftm pfpurge > 20483 0 0 0 3 0x14200 usbtsk usbtask > 32332 0 0 0 3 0x14200 usbatsk usbatsk > *18936 0 0 0 7 0x14210 softnet > 17844 0 0 0 3 0x14200 bored systqmp > 4243 0 0 0 3 0x14200 bored systq > 22992 0 0 0 3 0x40014200 idle0 > 25905 0 0 0 3 0x14200 kmalloc kmthread > 1 0 1 0 3 0x82 wait init > 0 -1 0 0 3 0x10200 scheduler swapper > ddb> sync crash dump halt reboot poweroff > ddb> > OpenBSD 5.9-beta (GENERIC) #1536: Thu Jan 28 20:18:35 MST 2016 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" > 586-class) 500 MHz > cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW > real mem = 536363008 (511MB) > avail mem = 513568768 (489MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40 > pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 > pcibios0: pcibios_get_intr_routing - function not supported > pcibios0: PCI IRQ Routing information unavailable. > pcibios0: PCI bus #0 is the last bus > bios0: ROM list: 0xc8000/0xa800 > cpu0 at mainbus0: (uniprocessor) > mtrr: K6-family MTRR support (2 registers) > amdmsr0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > 0:20:0: io address conflict 0x6100/0x100 > 0:20:0: io address conflict 0x6200/0x200 > pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33 > glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES > vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, > address 00:00:24:cb:a9:24 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, > address 00:00:24:cb:a9:25 > ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, > address 00:00:24:cb:a9:26 > ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, > address 00:00:24:cb:a9:27 > ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > re0 at pci0 dev 14 function 0 "Realtek 8139" rev 0x20: RTL8139C+ > (0x7480), irq 10, address 00:0a:fa:20:03:79 > rlphy0 at re0 phy 0: RTL internal PHY > ral0 at pci0 dev 17 function 0 "Ralink RT2561S" rev 0x00: irq 15, > address 00:12:0e:61:54:68 > ral0: MAC/BBP RT2561C, RF RT5225 > glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, > 32-bit 3579545Hz timer, watchdog, gpio, i2c > gpio0 at glxpcib0: 32 pins > iic0 at glxpcib0 > pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH-004G> > wd0: 1-sector PIO, LBA48, 3825MB, 7835184 sectors > wd1 at pciide0 channel 0 drive 1: <ELITE PRO CF CARD 4GB> > wd1: 1-sector PIO, LBA, 3823MB, 7831152 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7, > version 1.0, legacy support > ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 > isa0 at glxpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbc0: unable to establish interrupt for irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS > gpio1 at nsclpcsio0: 29 pins > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > softraid0: sd0 was not shutdown properly > sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 0, 005> SCSI2 0/direct fixed > sd0: 6827MB, 512 bytes/sector, 13981696 sectors > root on wd0a (cd1ed40cc23f4dd4.a) swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > panic: kernel diagnostic assertion "pd.m->m_pkthdr.pf.statekey == > NULL" failed: file "../../../../net/pf.c", line 6569 > Stopped at Debugger+0x7: leave > TID PID UID PRFLAGS PFLAGS CPU COMMAND > *25430 25430 0 0x14000 0x210 0 softnet > Debugger(d09feb68,f523fd14,d09d9764,f523fd14,d5f9a800) at Debugger+0x7 > panic(d09d9764,d0957746,d09cf8c8,d09cf988,19a9) at panic+0x71 > __assert(d0957746,d09cf988,19a9,d09cf8c8,0) at __assert+0x2e > pf_test(2,1,d1abd800,f523fe90,d0b56680) at pf_test+0xf2d > ipv4_input(d5f9a800,d0203028,60,f523fecc,d041c580) at ipv4_input+0x23e > ipintr(d041c580,56ab7925,0,f523fec8,d177cbc0) at ipintr+0x16 > netintr(0,d0b56680,d5f99400,f523ff0c,d03b8482) at netintr+0x62 > softintr_dispatch(1) at softintr_dispatch+0x5a > Xsoftnet() at Xsoftnet+0x12 > --- interrupt --- > uvm_fault(0xd0bbe100, 0x0, 0, 1) -> e > kernel: page fault trap, code=0 > Stopped at db_read_bytes+0x17: movzbl 0(%esi,%ecx,1),%eax > TID PID UID PRFLAGS PFLAGS CPU COMMAND > *25430 25430 0 0x14000 0x210 0 softnet > db_read_bytes(3,4,f523fae8,d0b52180,ffffffff) at db_read_bytes+0x17 > db_get_value(3,4,0,d03cbe95,d09feb68) at db_get_value+0x38 > db_numargs(ffffffff,f523fb80,0,3,d03cbe70) at db_numargs+0x24 > db_stack_trace_print(d0558f07,0,5,d09cb91a,d03cbe70) at > db_stack_trace_print+0x3a7 > db_trap(1,0,58,f523fc10,d039edc4) at db_trap+0xd2 > kdb_trap(1,0,f523fc78,f523fc30,d084b07e) at kdb_trap+0xcc > trap() at trap+0x2a5 > --- trap (number 1) --- > Bad frame pointer: 0xd09d9764 > 0: > http://www.openbsd.org/ddb.html describes the minimum info required in bug > reports. Insufficient info makes it difficult to find and fix bugs. > ddb> > OpenBSD 5.9-beta (GENERIC) #1536: Thu Jan 28 20:18:35 MST 2016 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" > 586-class) 500 MHz > cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW > real mem = 536363008 (511MB) > avail mem = 513568768 (489MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40 > pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 > pcibios0: pcibios_get_intr_routing - function not supported > pcibios0: PCI IRQ Routing information unavailable. > pcibios0: PCI bus #0 is the last bus > bios0: ROM list: 0xc8000/0xa800 > cpu0 at mainbus0: (uniprocessor) > mtrr: K6-family MTRR support (2 registers) > amdmsr0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > 0:20:0: io address conflict 0x6100/0x100 > 0:20:0: io address conflict 0x6200/0x200 > pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33 > glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES > vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, > address 00:00:24:cb:a9:24 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, > address 00:00:24:cb:a9:25 > ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, > address 00:00:24:cb:a9:26 > ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, > address 00:00:24:cb:a9:27 > ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x004063, model 0x0034 > re0 at pci0 dev 14 function 0 "Realtek 8139" rev 0x20: RTL8139C+ > (0x7480), irq 10, address 00:0a:fa:20:03:79 > rlphy0 at re0 phy 0: RTL internal PHY > ral0 at pci0 dev 17 function 0 "Ralink RT2561S" rev 0x00: irq 15, > address 00:12:0e:61:54:68 > ral0: MAC/BBP RT2561C, RF RT5225 > glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, > 32-bit 3579545Hz timer, watchdog, gpio, i2c > gpio0 at glxpcib0: 32 pins > iic0 at glxpcib0 > pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH-004G> > wd0: 1-sector PIO, LBA48, 3825MB, 7835184 sectors > wd1 at pciide0 channel 0 drive 1: <ELITE PRO CF CARD 4GB> > wd1: 1-sector PIO, LBA, 3823MB, 7831152 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7, > version 1.0, legacy support > ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 > isa0 at glxpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbc0: unable to establish interrupt for irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS > gpio1 at nsclpcsio0: 29 pins > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > softraid0: sd0 was not shutdown properly > sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 0, 005> SCSI2 0/direct fixed > sd0: 6827MB, 512 bytes/sector, 13981696 sectors > root on wd0a (cd1ed40cc23f4dd4.a) swap on wd0b dump on wd0b > WARNING: / was not properly unmounted >
