Hi!
It just crashed, didn't do anything fancy with it. I was connected with
ssh to the machine when suddenly I got disconnected.
Panic and dmesg:
syslogd: start
/bsd: uvm_fault(0xd8a30220, 0x0, 0, 1) -> e
/bsd: fatal page fault (6) in supervisor mode
/bsd: trap type 6 code 0 eip d052263b cs 8 eflags 210286 cr2 37 cpl 90
/bsd: panic: trap type 6, code=0, pc=d052263b
/bsd: Starting stack trace...
/bsd: panic(d08d7698,de2b8cc0,d08db05e,de2b8cc0,d09bdd14) at panic+0x6a
/bsd: panic(d08db05e,6,0,d052263b,8) at panic+0x6a
/bsd: trap() at trap+0x7f9
/bsd: --- trap (number -1) ---
/bsd: Bad frame pointer: 0xd1bda8f8
/bsd: 0:
/bsd: End of stack trace.
/bsd: syncing disks... 61 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53
53 giving up
/bsd: panic: assertwaitok: non-zero mutex count: 1
/bsd: Starting stack trace...
/bsd: panic(d08d7698,de2b8a70,8a54,0,d30c22c8) at panic+0x6a
/bsd: panic(d08b77bc,1,de2b8aa4,d03f16a7,d8d3c160) at panic+0x6a
/bsd: assertwaitok(d8d3c160,0,d30c1000,d30c1000,d30c1000) at assertwaitok+0x3e
/bsd: pool_get(d0a2eb80,1,d30c22b8,d30c2280,d30c1000) at pool_get+0x97
/bsd: ifa_item_insert(d30c22b8,d30c2280,d30c1000,d30c2280,d30c2280) at
ifa_item_insert+0x29
/bsd: ifa_add(d30c1000,d30c2280,d30c2280,0,100000a) at ifa_add+0x40
/bsd: in_ifinit(d30c1000,d30c2280,de2b8b64,0,0) at in_ifinit+0x16b
/bsd: sppp_clear_ip_addrs(d30c1000,d08bbd80,de2b8ba4,d043f3b9,d30c1000) at
sppp_clear_ip_addrs+0xbd
/bsd: sppp_ipcp_tlf(d30c1000,d30c1000,de2b8bc4,d043ba54,d30c1000) at
sppp_ipcp_tlf+0x1b
/bsd: sppp_ipcp_close(d30c1000,0,de2b8be4,8801,d30c1000) at sppp_ipcp_close+0x19
/bsd: sppp_lcp_tld(d30c1000,d30c1000,de2b8c04,d0442b17,d30c1000) at
sppp_lcp_tld+0x74
/bsd: sppp_lcp_close(d30c1000,0,de2b8c04,d045d234,24) at sppp_lcp_close+0x19
/bsd: sppp_ioctl(d30c1000,80206910,de2b8c24,37,0) at sppp_ioctl+0x1b7
/bsd: if_downall(d08b174b,1,fe,d08ab002,d03f3420) at if_downall+0x73
/bsd: boot(100,de2b8cc0,d08db05e,de2b8cc0,d09bdd14) at boot+0x136
/bsd: panic(d08db05e,6,0,d052263b,8) at panic+0x65
/bsd: trap() at trap+0x7f9
/bsd: --- trap (number -1) ---
/bsd: Bad frame pointer: 0xd1bda8f8
/bsd: 0:
/bsd: End of stack trace.
/bsd: OpenBSD 5.1 (GENERIC) #160: Sun Feb 12 09:46:33 MST 2012
/bsd: dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
/bsd: cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.42
GHz
/bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
/bsd: real mem = 2146955264 (2047MB)
/bsd: avail mem = 2101735424 (2004MB)
/bsd: mainbus0 at root
/bsd: bios0 at mainbus0: AT/286+ BIOS, date 11/05/02, BIOS32 rev. 0 @ 0xfdb60,
SMBIOS rev. 2.3 @ 0xf0630 (32 entries)
/bsd: bios0: vendor American Megatrends Inc. version "V1.2 11" date 11/05/2002
/bsd: bios0: MICRO-STAR INC. MS-6704
/bsd: acpi0 at bios0: rev 0
/bsd: acpi0: sleep states S0 S1 S4 S5
/bsd: acpi0: tables DSDT FACP APIC
/bsd: acpi0: wakeup devices USB1(S3) USB2(S3) USB3(S3) EHCI(S3) ICHB(S4)
PS2M(S4) PS2K(S4) UAR1(S4) MC9_(S4)
/bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits
/bsd: acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
/bsd: cpu0 at mainbus0: apid 0 (boot processor)
/bsd: cpu0: apic clock running at 133MHz
/bsd: ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
/bsd: acpiprt0 at acpi0: bus 0 (PCI0)
/bsd: acpiprt1 at acpi0: bus 2 (ICHB)
/bsd: acpicpu0 at acpi0
/bsd: acpipwrres0 at acpi0: URP1
/bsd: acpipwrres1 at acpi0: URP2
/bsd: acpipwrres2 at acpi0: FDDP
/bsd: acpipwrres3 at acpi0: LPTP
/bsd: acpibtn0 at acpi0: PWRB
/bsd: bios0: ROM list: 0xc0000/0xd000 0xcd000/0x4800 0xd1800/0x1000
0xe0000/0x1000
/bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios)
/bsd: pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x02
/bsd: intelagp0 at pchb0
/bsd: agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
/bsd: ppb0 at pci0 dev 1 function 0 "Intel 82845G AGP" rev 0x02
/bsd: pci1 at ppb0 bus 1
/bsd: vga1 at pci1 dev 0 function 0 "ATI Radeon 9600" rev 0x00
/bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
/bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
/bsd: radeondrm0 at vga1: apic 2 int 16
/bsd: drm0 at radeondrm0
/bsd: "ATI Radeon 9600 XT Sec" rev 0x00 at pci1 dev 0 function 1 not configured
/bsd: uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int
16
/bsd: uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int
19
/bsd: uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int
18
/bsd: ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int
23
/bsd: usb0 at ehci0: USB revision 2.0
/bsd: uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
/bsd: ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
/bsd: pci2 at ppb1 bus 2
/bsd: pciide0 at pci2 dev 3 function 0 "CMD Technology SiI3512 SATA" rev 0x01:
DMA
/bsd: pciide0: using apic 2 int 19 for native-PCI interrupt
/bsd: pciide0: port 0: device present, speed: 1.5Gb/s
/bsd: wd0 at pciide0 channel 0 drive 0: <ST3250310AS>
/bsd: wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
/bsd: wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
/bsd: pciide0: port 1: device present, speed: 1.5Gb/s
/bsd: wd1 at pciide0 channel 1 drive 0: <SAMSUNG HD501LJ>
/bsd: wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
/bsd: wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 7
/bsd: em0 at pci2 dev 4 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic
2 int 16, address xx:xx:xx:xx:xx:xx
/bsd: vge0 at pci2 dev 5 function 0 "VIA VT612x" rev 0x11: apic 2 int 17,
address xx:xx:xx:xx:xx:xx
/bsd: ciphy0 at vge0 phy 1: CS8201 10/100/1000TX PHY, rev. 1
/bsd: ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
/bsd: ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: apic 2
int 17
/bsd: iic0 at ichiic0
/bsd: iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00
0c=00 0d=07 0e=85 0f=00 10=c4 11=10 12=00 13=60 words 00=00ff 01=ffff 02=0fff
03=00ff 04=00ff 05=ffff 06=0fff 07=00ff
/bsd: spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
/bsd: spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
/bsd: usb1 at uhci0: USB revision 1.0
/bsd: uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
/bsd: usb2 at uhci1: USB revision 1.0
/bsd: uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
/bsd: usb3 at uhci2: USB revision 1.0
/bsd: uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
/bsd: isa0 at ichpcib0
/bsd: isadma0 at isa0
/bsd: com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
/bsd: pckbc0 at isa0 port 0x60/5
/bsd: pckbd0 at pckbc0 (kbd slot)
/bsd: pckbc0: using irq 1 for kbd slot
/bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
/bsd: pcppi0 at isa0 port 0x61
/bsd: spkr0 at pcppi0
/bsd: lpt0 at isa0 port 0x378/4 irq 7
/bsd: wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
/bsd: lm1 at wbsio0 port 0x290/8: W83627HF
/bsd: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
/bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
/bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
/bsd: mtrr: Pentium Pro MTRR support
/bsd: vscsi0 at root
/bsd: scsibus0 at vscsi0: 256 targets
/bsd: softraid0 at root
/bsd: scsibus1 at softraid0: 256 targets
/bsd: root on wd0a (69dbc259cb64de66.a) swap on wd0b dump on wd0b
/bsd: WARNING: / was not properly unmounted
/bsd: pppoe0: received unexpected PADO
last message repeated 12 times
savecore: reboot after panic: trap type 6, code=0, pc=d052263b
savecore: /var/crash/bounds: No such file or directory
savecore: writing core to /var/crash/bsd.0.core
savecore: writing kernel to /var/crash/bsd.0
# other information
# ps -N /var/crash/bsd.0 -M /var/crash/bsd.0.core -O paddr
PID PADDR TT STAT TIME COMMAND
28561 d8e3e29c C0 Is+ 0:00.00 (getty)
5826 d8e3ebb0 C1 Is+ 0:00.00 (getty)
14681 d8c29a68 C2 Is+ 0:00.00 (getty)
23777 d8a31688 C3 Is+ 0:00.00 (getty)
12532 d881315c C5 Is+ 0:00.00 (getty)
# ps -xhklww -M bsd.0.core -N bsd.0 -O paddr
UID PID PPID CPU PRI NI VSZ RSS WCHAN STAT TT TIME COMMAND
PADDR
0 14 0 0 -18 0 0 0 aiodone DK ?? 0:00.00
(aiodoned) d8e3e150
0 10 0 0 -18 0 0 0 pgdaemo DK ?? 0:00.00
(pagedaemon) d8e48bac
0 11 0 0 -18 0 0 0 reaper DK ?? 1:12.22 (reaper)
d8e48cf8
0 12 0 0 -13 0 0 0 cleaner DK ?? 0:01.58 (cleaner)
d8e48e44
0 13 0 0 18 0 0 0 - RK ?? 1:19.96 (update)
d8e3e004
0 3 0 36 -22 0 0 0 - DK ?? 4242:59.48 (idle0)
d8e48298
0 5 0 0 10 0 0 0 acpi0 DK ?? 0:00.00 (acpi0)
d8e48530
0 6 0 0 10 0 0 0 usbatsk DK ?? 0:00.00 (usbatsk)
d8e4867c
0 7 0 0 10 0 0 0 usbtsk DK ?? 0:00.00 (usbtask)
d8e487c8
0 8 0 0 10 0 0 0 - RK ?? 0:05.81 (pfpurge)
d8e48914
0 9 0 0 10 0 0 0 bored DK ?? 0:00.00 (crypto)
d8e48a60
0 0 0 0 -18 0 0 0 - RKs ?? 0:00.10 (swapper)
d0a26240
0 1 0 0 10 0 424 0 wait Is ?? 0:00.01 (init)
d8e48000
0 2 0 0 -18 0 0 0 kmalloc DK ?? 0:00.13
(kmthread) d8e4814c
0 4 0 0 10 0 0 0 - RK ?? 0:04.51 (syswq)
d8e483e4
0 28192 1 0 2 0 476 0 netio Is ?? 0:00.01 (syslogd)
d8e3e680
0 15539 1 8 2 0 500 0 netio Is ?? 0:00.00 (pflogd)
d8e3ea64
0 29210 1 0 2 0 620 0 poll Is ?? 0:00.01 (ntpd)
d8e3ee48
0 28941 1 0 2 0 704 0 select Is ?? 0:00.00 (sshd)
d8c29154
0 18906 1 0 2 0 31492 0 - Rs ?? 0:53.42 (perl)
d8a3100c
0 25423 1 0 2 0 632 0 kqread Is ?? 0:00.10 (dovecot)
d8c29008
0 6610 25423 0 2 0 704 0 kqread I ?? 0:00.03 (log)
d8a317d4
0 27465 1 0 2 0 764 0 kqread Is ?? 0:00.91 (master)
d8a31920
0 3042 1 0 10 0 332 0 nanosle Ss ?? 0:01.32
(sensorsd) d8813010
0 19851 1 0 2 0 756 0 select Is ?? 0:00.40 (cron)
d8a31d04
0 26847 25423 1 2 0 2096 0 kqread I ?? 0:00.02 (config)
d8813540
0 28561 1 7 3 0 252 0 ttyin Is+ C0 0:00.00 (getty)
d8e3e29c
0 5826 1 7 3 0 392 0 ttyin Is+ C1 0:00.00 (getty)
d8e3ebb0
0 14681 1 7 3 0 244 0 ttyin Is+ C2 0:00.00 (getty)
d8c29a68
0 23777 1 7 3 0 456 0 ttyin Is+ C3 0:00.00 (getty)
d8a31688
0 12532 1 7 3 0 400 0 ttyin Is+ C5 0:00.00 (getty)
d881315c
# vmstat -N /var/crash/bsd.0 -M /var/crash/bsd.0.core -m
vmstat: undefined symbols: _uvm_km_pages_free
# gdb
GNU gdb 6.3
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-unknown-openbsd5.1".
(gdb) file /var/crash/bsd.0
Reading symbols from /var/crash/bsd.0...(no debugging symbols found)...done.
(gdb) target kvm /var/crash/bsd.0.core
#0 0xd056c7b2 in boot ()
(gdb) where
#0 0xd056c7b2 in boot ()
#1 0xd03f38d5 in panic ()
#2 0xd03f616e in assertwaitok ()
#3 0xd03f16a7 in pool_get ()
#4 0xd0435db9 in ifa_item_insert ()
#5 0xd0435e80 in ifa_add ()
#6 0xd048502b in in_ifinit ()
#7 0xd043cf1d in sppp_clear_ip_addrs ()
#8 0xd043cfab in sppp_ipcp_tlf ()
#9 0xd043f3b9 in sppp_ipcp_close ()
#10 0xd043ba54 in sppp_lcp_tld ()
#11 0xd043f3d9 in sppp_lcp_close ()
#12 0xd0442b17 in sppp_ioctl ()
#13 0xd0437423 in if_downall ()
#14 0xd056c786 in boot ()
#15 0xd03f38d5 in panic ()
#16 0xd0576fa9 in trap ()
#17 0xd0200b25 in alltraps ()
#18 0xde2b8d60 in ?? ()
#19 0xffffffff in ?? ()
#20 0xffffffff in ?? ()
#21 0xffffffff in ?? ()
#22 0xffffffff in ?? ()
#23 0x00000006 in ?? ()
#24 0x00000000 in ?? ()
###############
# ifconfig -a #
###############
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33196
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr xx:xx:xx:xx:xx:xx
priority: 0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::21b:21ff:fe0a:aa12%em0 prefixlen 64 scopeid 0x1
vge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr xx:xx:xx:xx:xx:xx
priority: 0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::204:e2ff:fe76:98d0%vge0 prefixlen 64 scopeid 0x2
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog1: flags=0<> mtu 33196
priority: 0
groups: pflog
pppoe0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1492
priority: 0
dev: em0 state: session
sid: 0xee PADI retries: 0 PADR retries: 0 time: 01:40:59
sppp: phase network authproto pap
groups: pppoe egress
status: active
inet6 fe80::21b:21ff:fe0a:aa12%pppoe0 -> prefixlen 64 scopeid 0x6
inet xxx.xxx.xxx.xxx --> 10.0.0.1 netmask 0xffffffff
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33196
priority: 0
groups: pflog
##############
# pcidump -v #
##############
Domain /dev/pci0:
0:0:0: Intel 82845G Host
0x0000: Vendor ID: 8086 Product ID: 2560
0x0004: Command: 0006 Status ID: 2090
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem prefetchable 32bit addr: 0xe0000000/0x04000000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e4: Capability 0x09: Vendor Specific
0x00a0: Capability 0x02: AGP
0:1:0: Intel 82845G AGP
0x0000: Vendor ID: 8086 Product ID: 2561
0x0004: Command: 0107 Status ID: 00a0
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 01 Latency Timer: 20 Cache Line Size: 00
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
Secondary Latency Timer: 20
0x001c: I/O Base: b0 I/O Limit: b0 Secondary Status: 22a0
0x0020: Memory Base: dfc0 Memory Limit: dfc0
0x0024: Prefetch Memory Base: 9f90 Prefetch Memory Limit: df90
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Bridge Control: 000d
0:29:0: Intel 82801DB USB
0x0000: Vendor ID: 8086 Product ID: 24c2
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000e400/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1462 Product ID: 7040
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: 00 Max Lat: 00
0:29:1: Intel 82801DB USB
0x0000: Vendor ID: 8086 Product ID: 24c4
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000e800/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1462 Product ID: 7040
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 03 Min Gnt: 00 Max Lat: 00
0:29:2: Intel 82801DB USB
0x0000: Vendor ID: 8086 Product ID: 24c7
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000ec00/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1462 Product ID: 7040
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 03 Line: 05 Min Gnt: 00 Max Lat: 00
0:29:7: Intel 82801DB USB
0x0000: Vendor ID: 8086 Product ID: 24cd
0x0004: Command: 0006 Status ID: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xdffffc00/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1462 Product ID: 3981
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 04 Line: 0a Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x0a: Debug Port
0:30:0: Intel 82801BA Hub-to-PCI
0x0000: Vendor ID: 8086 Product ID: 244e
0x0004: Command: 0107 Status ID: 8080
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 82
0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
Secondary Latency Timer: 20
0x001c: I/O Base: c0 I/O Limit: d0 Secondary Status: 2280
0x0020: Memory Base: dfd0 Memory Limit: dfe0
0x0024: Prefetch Memory Base: fff0 Prefetch Memory Limit: 0000
0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Bridge Control: 0006
0:31:0: Intel 82801DB LPC
0x0000: Vendor ID: 8086 Product ID: 24c0
0x0004: Command: 000f Status ID: 0280
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:31:3: Intel 82801DB SMBus
0x0000: Vendor ID: 8086 Product ID: 24c3
0x0004: Command: 0001 Status ID: 0280
0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00000c00/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1462 Product ID: 7040
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 00 Min Gnt: 00 Max Lat: 00
1:0:0: ATI Radeon 9600
0x0000: Vendor ID: 1002 Product ID: 4152
0x0004: Command: 0007 Status ID: 02b0
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 00
0x000c: BIST: 00 Header Type: 80 Latency Timer: 20 Cache Line Size: 08
0x0010: BAR mem prefetchable 32bit addr: 0xc0000000/0x10000000
0x0014: BAR io addr: 0x0000b800/0x0100
0x0018: BAR mem 32bit addr: 0xdfcf0000/0x00010000
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 174b Product ID: 0200
0x0030: Expansion ROM Base Address: dfcc0000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: 08 Max Lat: 00
0x0058: Capability 0x02: AGP
0x0050: Capability 0x01: Power Management
1:0:1: ATI Radeon 9600 XT Sec
0x0000: Vendor ID: 1002 Product ID: 4172
0x0004: Command: 0007 Status ID: 02b0
0x0008: Class: 03 Subclass: 80 Interface: 00 Revision: 00
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08
0x0010: BAR mem prefetchable 32bit addr: 0xb0000000/0x10000000
0x0014: BAR mem 32bit addr: 0xdfce0000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 174b Product ID: 0201
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: ff Min Gnt: 08 Max Lat: 00
0x0050: Capability 0x01: Power Management
2:3:0: CMD Technology SiI3512 SATA
0x0000: Vendor ID: 1095 Product ID: 3512
0x0004: Command: 0007 Status ID: 02b0
0x0008: Class: 01 Subclass: 04 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08
0x0010: BAR io addr: 0x0000dc00/0x0008
0x0014: BAR io addr: 0x0000d800/0x0004
0x0018: BAR io addr: 0x0000d400/0x0008
0x001c: BAR io addr: 0x0000d000/0x0004
0x0020: BAR io addr: 0x0000cc00/0x0010
0x0024: BAR mem 32bit addr: 0xdfeffe00/0x00000200
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1095 Product ID: 6512
0x0030: Expansion ROM Base Address: dfe00000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 03 Min Gnt: 00 Max Lat: 00
0x0060: Capability 0x01: Power Management
2:4:0: Intel PRO/1000GT (82541GI)
0x0000: Vendor ID: 8086 Product ID: 107c
0x0004: Command: 0017 Status ID: 0230
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 05
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08
0x0010: BAR mem 32bit addr: 0xdfec0000/0x00020000
0x0014: BAR mem 32bit addr: 0xdfea0000/0x00020000
0x0018: BAR io addr: 0x0000c800/0x0040
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 1376
0x0030: Expansion ROM Base Address: dfe80000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: ff Max Lat: 00
0x00dc: Capability 0x01: Power Management
0x00e4: Capability 0x07: PCI-X
2:5:0: VIA VT612x
0x0000: Vendor ID: 1106 Product ID: 3119
0x0004: Command: 0017 Status ID: 0230
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 11
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08
0x0010: BAR io addr: 0x0000c400/0x0100
0x0014: BAR mem 32bit addr: 0xdfeffd00/0x00000100
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1106 Product ID: 0110
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0f Min Gnt: 03 Max Lat: 08
0x0050: Capability 0x01: Power Management
#############
# sysctl hw #
#############
hw.machine=i386
hw.model=Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class)
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0:69dbc259cb64de66,wd1:31884673ad7ec33e,fd0:
hw.diskcount=3
hw.sensors.lm1.temp0=8.00 degC
hw.sensors.lm1.temp1=45.00 degC
hw.sensors.lm1.temp2=30.50 degC
hw.sensors.lm1.volt0=1.52 VDC (VCore A)
hw.sensors.lm1.volt1=1.46 VDC (VCore B)
hw.sensors.lm1.volt2=3.17 VDC (+3.3V)
hw.sensors.lm1.volt3=4.92 VDC (+5V)
hw.sensors.lm1.volt4=11.73 VDC (+12V)
hw.sensors.lm1.volt5=-11.46 VDC (-12V)
hw.sensors.lm1.volt6=-4.90 VDC (-5V)
hw.sensors.lm1.volt7=4.92 VDC (5VSB)
hw.sensors.lm1.volt8=3.14 VDC (VBAT)
hw.cpuspeed=2411
hw.setperf=100
hw.vendor=MICRO-STAR INC.
hw.product=MS-6704
hw.version=100
hw.serialno=00000000
hw.uuid=Not Set
hw.physmem=2146955264
hw.usermem=2146942976
hw.ncpufound=1
hw.allowpowerdown=1
##############
# usbdevs -v #
##############
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Daniel
--
LÉVAI Dániel
PGP key ID = 0x83B63A8F
Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F
