[ using 733264 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.9-current (GENERIC.MP) #81: Thu Apr 21 00:10:03 MDT 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FE
real mem = 1073184768 (1023MB)
avail mem = 1045463040 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices RTC_(S5) PCI0(S5) PCI1(S5) PCI2(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0panic: cpu at apic id 0 already attached?
Stopped at Debugger+0x4: popl %ebp
Debugger(d08e3546,d0ba8b24,d0992a68,d0ba8b24,d08c0b02) at Debugger+0x4
panic(d0992a68,0,0,0,d0ba8b54) at panic+0x5d
apic_format_redir(d1e95fc0,d1da8400,d0ba8c04,d03e655b,0) at apic_format_redir
config_attach(d1e95fc0,d09c2b28,d0ba8c04,d083fb70,0) at config_attach+0x140
acpimadt_attach(d1e93c00,d1ea9d80,d0ba8c94,d03e655b,d0830190) at acpimadt_attac
h+0x36a
config_attach(d1e93c00,d09c3ddc,d0ba8c94,d0830e50,0) at config_attach+0x140
acpi_attach(d1e95f80,d1e93c00,d0ba8d84,d03e655b,0) at acpi_attach+0x4f1
config_attach(d1e95f80,d09c3c98,d0ba8d84,d07766c0,2f) at config_attach+0x140
biosattach(d1e95fc0,d1e95f80,d0ba8e5c,d03e655b,0) at biosattach+0x456
config_attach(d1e95fc0,d09c2abc,d0ba8e5c,d05a82b0,10) at config_attach+0x140
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{0}> trace
Debugger(d08e3546,d0ba8b24,d0992a68,d0ba8b24,d08c0b02) at Debugger+0x4
panic(d0992a68,0,0,0,d0ba8b54) at panic+0x5d
apic_format_redir(d1e95fc0,d1da8400,d0ba8c04,d03e655b,0) at apic_format_redir
config_attach(d1e95fc0,d09c2b28,d0ba8c04,d083fb70,0) at config_attach+0x140
acpimadt_attach(d1e93c00,d1ea9d80,d0ba8c94,d03e655b,d0830190) at acpimadt_attac
h+0x36a
config_attach(d1e93c00,d09c3ddc,d0ba8c94,d0830e50,0) at config_attach+0x140
acpi_attach(d1e95f80,d1e93c00,d0ba8d84,d03e655b,0) at acpi_attach+0x4f1
config_attach(d1e95f80,d09c3c98,d0ba8d84,d07766c0,2f) at config_attach+0x140
biosattach(d1e95fc0,d1e95f80,d0ba8e5c,d03e655b,0) at biosattach+0x456
config_attach(d1e95fc0,d09c2abc,d0ba8e5c,d05a82b0,10) at config_attach+0x140
mainbus_attach(0,d1e95fc0,0,d09c00d4,0) at mainbus_attach+0x4e
config_attach(0,d09c00d4,0,0,d0a343e0) at config_attach+0x140
config_rootfound(d08e2506,0,0,d03d7ef1,0) at config_rootfound+0x46
cpu_configure(d0af11e0,1,1000,cff3f000,1) at cpu_configure+0x29
main(d02004ba,d02004c2,0,0,0) at main+0x40a
ddb{0}> mach ddbcpu 1
Invalid cpu 1
Previously running kernel:
[ using 628800 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.4-beta (GENERIC.MP) #837: Tue Aug 5 12:18:32 MDT 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.
27 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
MMX,FXSR,SSE
real mem = 1073184768 (1023MB)
avail mem = 1029234688 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIO
S rev. 2.3 @ 0xfb1e0 (47 entries)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc200/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000 0xcf000/0x1800 0
xec000/0x4000!
ipmi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.
27 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int
1 (irq 11), address 00:06:5b:ec:9c:f6
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int
0 (irq 7), address 00:06:5b:ec:9c:f7
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 2 (
irq 5)
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct f
ixed
sd0: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 1 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct f
ixed
sd1: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct f
ixed
sd2: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
safte0 at scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.28> SCSI2 3/processor
fixed
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 3 (
irq 11)
scsibus1 at ahc1: 16 targets, initiator 7
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
uhci0 at pci0 dev 10 function 0 "VIA VT83C572 USB" rev 0x62: apic 3 int 4 (irq
11)
uhci1 at pci0 dev 10 function 1 "VIA VT83C572 USB" rev 0x62: apic 3 int 5 (irq
7)
ehci0 at pci0 dev 10 function 2 "VIA VT6202 USB" rev 0x65: apic 3 int 6 (irq 5
)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 256MB SDRAM registered ECC PC133CL2
spdmem1 at iic0 addr 0x51: 256MB SDRAM registered ECC PC133CL2
spdmem2 at iic0 addr 0x52: 256MB SDRAM registered ECC PC133CL2
spdmem3 at iic0 addr 0x53: 256MB SDRAM registered ECC PC133CL2
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus2 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> ATAPI 5/cdrom rem
ovable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2 i
nt 3 (irq 3), version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 80.0MHz DT, offset = 0x7f
root on sd0a swap on sd0b dump on sd0b
bsd.rd hangs on 'rd0: fixed,..':
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.9-current (RAMDISK_CD) #41: Thu Apr 21 00:17:13 MDT 2011
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FE
real mem = 1073184768 (1023MB)
avail mem = 1048649728 (1000MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (application processor)
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus -1 (ZION)
acpiprt3 at acpi0: bus 2 (PCI2)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000 0xcf000/0x1800 0x!
cpu at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 6
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 7
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 2 (i)
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi5
sd0: 70007MB, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 1 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi3
sd1: 70007MB, 512 bytes/sec, 143374650 sec total
sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi9
sd2: 70007MB, 512 bytes/sec, 143374650 sec total
scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.28> SCSI2 3/processor fixed not
cdahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 3
(i)
scsibus1 at ahc1: 16 targets, initiator 7
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
uhci0 at pci0 dev 10 function 0 "VIA VT83C572 USB" rev 0x62: apic 3 int 4 (irq )
uhci1 at pci0 dev 10 function 1 "VIA VT83C572 USB" rev 0x62: apic 3 int 5 (irq )
ehci0 at pci0 dev 10 function 2 "VIA VT6202 USB" rev 0x65: apic 3 int 6 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pchb4 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> ATAPI 5/cdrom remoe
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2 int
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
rd0: fixed, 3872 blocks
Tried with 'disable acpimadt' and it works:
>> OpenBSD/i386 BOOT 3.02
boot> bsd.rd49cur -c
booting hd0a:bsd.rd49cur: 5929292+952636 [61+226208+214150]=0x6fbc8c
entry point at 0x200120
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.9-current (RAMDISK_CD) #41: Thu Apr 21 00:17:13 MDT 2011
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FE
real mem = 1073184768 (1023MB)
avail mem = 1048649728 (1000MB)
User Kernel Config
UKC> disable acpimadt
254 acpimadt0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus -1 (ZION)
acpiprt3 at acpi0: bus 2 (PCI2)
mpbios at bios0 function 0x0 not configured
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000 0xcf000/0x1800 0x!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: irq 11, add6
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: irq 7, addr7
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 5
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi5
sd0: 70007MB, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 1 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi3
sd1: 70007MB, 512 bytes/sec, 143374650 sec total
sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi9
sd2: 70007MB, 512 bytes/sec, 143374650 sec total
scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.28> SCSI2 3/processor fixed not cd
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 11
scsibus1 at ahc1: 16 targets, initiator 7
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
uhci0 at pci0 dev 10 function 0 "VIA VT83C572 USB" rev 0x62: irq 11
uhci1 at pci0 dev 10 function 1 "VIA VT83C572 USB" rev 0x62: irq 7
ehci0 at pci0 dev 10 function 2 "VIA VT6202 USB" rev 0x65: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pchb4 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> ATAPI 5/cdrom remoe
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 3, vet
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffed netmask ffed ttymask ffff
rd0: fixed, 3872 blocks
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 80.0MHz DT, offset = 0x7f
umass0 at uhub0 port 1 configuration 1 interface 0 "Western Digital My Book 1112
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd3 at scsibus3 targ 1 lun 0: <WD, My Book 1110, 2003> SCSI2 0/direct fixed
sd3: 953199MB, 512 bytes/sec, 1952151552 sec total
cd1 at scsibus3 targ 1 lun 1: <WD, Virtual CD 1110, 2003> SCSI2 5/cdrom removabe
scsibus3 targ 1 lun 2: <WD, SES Device, 2003> SCSI2 13/enclosure services fixedd
softraid0 at root
scsibus4 at softraid0: 1 targets
sd4 at scsibus4 targ 0 lun 0: <OPENBSD, SR RAID 0, 004> SCSI2 0/direct fixed
sd4: 209699MB, 512 bytes/sec, 429465405 sec total
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
kern.osrelease=4.9
hw.machine=i386
hw.model=Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class)
hw.product=PowerEdge 1650
hw.disknames=sd0:,sd1:,sd2:,cd0:,fd0:,rd0:65ee03026b2add82,sd3:867f04c3ea7a7417:
hw.ncpufound=1
There are definately two cpus in this system.
4.4 release with 'disable acpimadt' freezes in 'iic0 at piixpm0':
[ using 628768 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.4 (GENERIC.MP) #844: Tue Aug 12 17:24:39 MDT 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,ME
real mem = 267878400 (255MB)
avail mem = 250523648 (238MB)
User Kernel Config
UKC> disable acpimadt
440 acpimadt0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices RTC_(S5) PCI0(S5) PCI1(S5) PCI2(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus -1 (ZION)
acpiprt3 at acpi0: bus 2 (PCI2)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000 0xcf000/0x1800 0x!
ipmi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,ME
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 6
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 7
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 2 (i)
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fid
sd0: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 1 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fid
sd1: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fid
sd2: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
safte0 at scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.28> SCSI2 3/processor fd
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 3 (i)
scsibus1 at ahc1: 16 targets, initiator 7
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
uhci0 at pci0 dev 10 function 0 "VIA VT83C572 USB" rev 0x62: apic 3 int 4 (irq )
uhci1 at pci0 dev 10 function 1 "VIA VT83C572 USB" rev 0x62: apic 3 int 5 (irq )
ehci0 at pci0 dev 10 function 2 "VIA VT6202 USB" rev 0x65: apic 3 int 6 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMI
iic0 at piixpm0
4.4 release works with 'disable acpimadt' 'disable piixpm':
[ using 628768 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.4 (GENERIC.MP) #844: Tue Aug 12 17:24:39 MDT 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,ME
real mem = 267878400 (255MB)
avail mem = 250523648 (238MB)
User Kernel Config
UKC> disable acpimadt
440 acpimadt0 disabled
UKC> disable piixpm
197 piixpm* disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices RTC_(S5) PCI0(S5) PCI1(S5) PCI2(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus -1 (ZION)
acpiprt3 at acpi0: bus 2 (PCI2)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000 0xcf000/0x1800 0x!
ipmi at mainbus0 not configured
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,ME
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 6
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 7
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 2 (i)
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fid
sd0: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 1 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fid
sd1: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fid
sd2: 70007MB, 49070 cyl, 4 head, 730 sec, 512 bytes/sec, 143374650 sec total
safte0 at scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.28> SCSI2 3/processor fd
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 3 (i)
scsibus1 at ahc1: 16 targets, initiator 7
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
uhci0 at pci0 dev 10 function 0 "VIA VT83C572 USB" rev 0x62: apic 3 int 4 (irq )
uhci1 at pci0 dev 10 function 1 "VIA VT83C572 USB" rev 0x62: apic 3 int 5 (irq )
ehci0 at pci0 dev 10 function 2 "VIA VT6202 USB" rev 0x65: apic 3 int 6 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
pchb4 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus2 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> ATAPI 5/cdrom remoe
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2 int
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "Western Digital My Book 1112
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd3 at scsibus3 targ 1 lun 0: <WD, My Book 1110, 2003> SCSI2 0/direct fixed
sd3: 953199MB, 121515 cyl, 255 head, 63 sec, 512 bytes/sec, 1952151552 sec total
cd1 at scsibus3 targ 1 lun 1: <WD, Virtual CD 1110, 2003> SCSI2 5/cdrom removabe
ses0 at scsibus3 targ 1 lun 2: <WD, SES Device, 2003> SCSI2 13/enclosure servicd
ses0: unable to read enclosure configuration
softraid0 at root
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
softraid0: sd0d can not read metadata version 4, expected 3
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f
softraid0: sd1d can not read metadata version 4, expected 3
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 80.0MHz DT, offset = 0x7f
softraid0: sd2d can not read metadata version 4, expected 3
root on sd0a swap on sd0b dump on sd0b
# sysctl hw
hw.machine=i386
hw.model=Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class)
hw.ncpu=2
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0,sd1,sd2,cd0,fd0,sd3,cd1
hw.diskcount=7
hw.sensors.safte0.temp0=20.56 degC, OK
hw.cpuspeed=1264
hw.vendor=Dell Computer Corporation
hw.product=PowerEdge 1650
hw.serialno=23TML11
hw.uuid=44454c4c-3300-1054-804d-b2c04f4c3131
hw.physmem=267878400
hw.usermem=267862016
4.9-current with 'disable acpimadt' 'disable piixpm':
>> OpenBSD/i386 BOOT 3.02
boot> bsd.mp49cur -cs
booting hd0a:bsd.mp49cur: 8286496+1100996 [61+373888+358899]=0x9a6e34
entry point at 0x200120
[ using 733264 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.9-current (GENERIC.MP) #81: Thu Apr 21 00:10:03 MDT 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FE
real mem = 267878400 (255MB)
avail mem = 253333504 (241MB)
User Kernel Config
UKC> disable acpimadt
487 acpimadt0 disabled
UKC> disable piixpm
207 piixpm* already disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS)
bios0: vendor Dell Computer Corporation version "A11" date 10/08/2003
bios0: Dell Computer Corporation PowerEdge 1650
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices RTC_(S5) PCI0(S5) PCI1(S5) PCI2(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus -1 (ZION)
acpiprt3 at acpi0: bus 2 (PCI2)
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel" 686-class) 1.2z
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FE
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000 0xcf000/0x1800 0x!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 1
em0 at pci1 dev 2 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 6
em1 at pci1 dev 4 function 0 "Intel PRO/1000XT (82544EI)" rev 0x02: apic 3 int 7
ahc0 at pci1 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 2 (i)
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi5
sd0: 70007MB, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 1 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi3
sd1: 70007MB, 512 bytes/sec, 143374650 sec total
sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS10K4_73SCA, DFX1> SCSI3 0/direct fi9
sd2: 70007MB, 512 bytes/sec, 143374650 sec total
safte0 at scsibus0 targ 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.28> SCSI2 3/processor fd
ahc1 at pci1 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 3 (i)
scsibus1 at ahc1: 16 targets, initiator 7
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 2
uhci0 at pci0 dev 10 function 0 "VIA VT83C572 USB" rev 0x62: apic 3 int 4 (irq )
uhci1 at pci0 dev 10 function 1 "VIA VT83C572 USB" rev 0x62: apic 3 int 5 (irq )
ehci0 at pci0 dev 10 function 2 "VIA VT6202 USB" rev 0x65: apic 3 int 6 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb4 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> ATAPI 5/cdrom remoe
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2 int
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x7f
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 80.0MHz DT, offset = 0x7f
umass0 at uhub0 port 1 configuration 1 interface 0 "Western Digital My Book 1112
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd3 at scsibus3 targ 1 lun 0: <WD, My Book 1110, 2003> SCSI2 0/direct fixed
sd3: 953199MB, 512 bytes/sec, 1952151552 sec total
cd1 at scsibus3 targ 1 lun 1: <WD, Virtual CD 1110, 2003> SCSI2 5/cdrom removabe
ses0 at scsibus3 targ 1 lun 2: <WD, SES Device, 2003> SCSI2 13/enclosure servicd
ses0: unable to read enclosure configuration
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 1 targets
sd4 at scsibus5 targ 0 lun 0: <OPENBSD, SR RAID 0, 004> SCSI2 0/direct fixed
sd4: 209699MB, 512 bytes/sec, 429465405 sec total
root on sd0a swap on sd0b dump on sd0b
acpidump:
[demime removed a uuencoded section named dell1650.tar.gz which was 103 lines]
--
Todd Fries .. [email protected]
_____________________________________________
| \ 1.636.410.0632 (voice)
| Free Daemon Consulting, LLC \ 1.405.227.9094 (voice)
| http://FreeDaemonConsulting.com \ 1.866.792.3418 (FAX)
| 2525 NW Expy #525, Oklahoma City, OK 73112 \ sip:[email protected]
| "..in support of free software solutions." \ sip:[email protected]
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
37E7 D3EB 74D0 8D66 A68D B866 0326 204E 3F42 004A
http://todd.fries.net/pgp.txt
