URL:
<https://savannah.gnu.org/support/?109945>
Summary: Removed a USB device after wiping its partition but
before exiting
Project: GNU Parted
Submitted by: None
Submitted on: Wed 28 Aug 2019 06:36:17 AM UTC
Category: None
Priority: 5 - Normal
Severity: 1 - Wish
Status: None
Privacy: Public
Assigned to: None
Originator Email: sevenbrokenbri...@gmail.com
Open/Closed: Open
Discussion Lock: Any
Operating System: GNU/Linux
_______________________________________________________
Details:
(parted) print devices
/dev/sda (500GB)
/dev/sdb (500GB)
/dev/sdc (1000GB)
/dev/sr0 (2097MB)
/dev/sdd (73.4MB)
(parted) select /dev/sdd
Using /dev/sdd
(parted) print
Model: USB DISK Pro (scsi)
Disk /dev/sdd: 73.4MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
1 0.00B 73.4MB 73.4MB fat16
(parted) rm 1
Warning: Partition /dev/sdd is being used. Are you sure you want to continue?
Yes/No? y
(parted) print
Model: USB DISK Pro (scsi)
Disk /dev/sdd: 73.4MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags:
Number Start End Size File system Flags
(parted) print devices
/dev/sdc (1000GB)
/dev/sdd (73.4MB)
/dev/sda (500GB)
/dev/sdb (500GB)
/dev/sr0 (2097MB)
Error: Error opening /dev/sdd: No medium found
Retry/Cancel? c
(parted) exit
align-check TYPE N check partition N for
TYPE(min|opt)
alignment
help [COMMAND] print general help, or help on
COMMAND
mklabel,mktable LABEL-TYPE create a new disklabel (partition
table)
mkpart PART-TYPE [FS-TYPE] START END make a partition
name NUMBER NAME name partition NUMBER as NAME
print [devices|free|list,all|NUMBER] display the partition table,
available
devices, free space, all found partitions, or a particular partition
quit exit program
rescue START END rescue a lost partition near START
and
END
resizepart NUMBER END resize partition NUMBER
rm NUMBER delete partition NUMBER
select DEVICE choose the device to edit
disk_set FLAG STATE change the FLAG on selected device
disk_toggle [FLAG] toggle the state of FLAG on
selected
device
set NUMBER FLAG STATE change the FLAG on partition
NUMBER
toggle [NUMBER [FLAG]] toggle the state of FLAG on
partition
NUMBER
unit UNIT set the default unit to UNIT
version display the version number and
copyright
information of GNU Parted
(parted) quit
You found a bug in GNU Parted! Here's what you have to do:
Don't panic! The bug has most likely not affected any of your data.
Help us to fix this bug by doing the following:
Check whether the bug has already been fixed by checking
the last version of GNU Parted that you can find at:
http://ftp.gnu.org/gnu/parted/
Please check this version prior to bug reporting.
If this has not been fixed yet or if you don't know how to check,
please visit the GNU Parted website:
http://www.gnu.org/software/parted
for further information.
Your report should contain the version of this release (3.2)
along with the error message below, the output of
parted DEVICE unit co print unit s print
and the following history of commands you entered.
Also include any additional information about your setup you
consider important.
Command History:
help
print devices
print all
print devices
help
print
print all
select /dev/sdb
print
rm 1
select /dev/sdc
print
rm 1
print devices
select /dev/sdd
print
rm 1
y
print
print devices
c
exit
quit
Error: SEGV_MAPERR (Address not mapped to object)
Backtrace has 9 calls on stack:
9: /lib/x86_64-linux-gnu/libparted.so.2(ped_assert+0x45) [0x7f01bc422c45]
8: parted(+0xbc7b) [0x55b4946c9c7b]
7: /lib/x86_64-linux-gnu/libc.so.6(+0x43f60) [0x7f01bc1f2f60]
6: parted(+0x8ad1) [0x55b4946c6ad1]
5: parted(+0x8bbf) [0x55b4946c6bbf]
4: parted(interactive_mode+0x12c) [0x55b4946cbecc]
3: parted(main+0x13ab) [0x55b4946c4deb]
2: /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xeb) [0x7f01bc1d5b6b]
1: parted(_start+0x2a) [0x55b4946c4e7a]
You found a bug in GNU Parted! Here's what you have to do:
Don't panic! The bug has most likely not affected any of your data.
Help us to fix this bug by doing the following:
Check whether the bug has already been fixed by checking
the last version of GNU Parted that you can find at:
http://ftp.gnu.org/gnu/parted/
Please check this version prior to bug reporting.
If this has not been fixed yet or if you don't know how to check,
please visit the GNU Parted website:
http://www.gnu.org/software/parted
for further information.
Your report should contain the version of this release (3.2)
along with the error message below, the output of
parted DEVICE unit co print unit s print
and the following history of commands you entered.
Also include any additional information about your setup you
consider important.
Assertion (0) at ../../parted/ui.c:356 in function sa_sigsegv_handler()
failed.
Aborted
_______________________________________________________
Reply to this item at:
<https://savannah.gnu.org/support/?109945>
_______________________________________________
Message sent via Savannah
https://savannah.gnu.org/
