Bernie Innocenti wrote: > I attached a USB enclosure containing a 160MB PATA disk formatted with > an Apple Partition Map and got this error: > > ----------8<-----------8<-----------8<-----------8<-----------8<---------- > GNU Parted 2.3 > Using /dev/sdc > Welcome to GNU Parted! Type 'help' to view a list of commands. > (parted) p > Error: Can't have a partition outside the disk! > ----------8<-----------8<-----------8<-----------8<-----------8<---------- > > The partition table display correctly in Palimpsest and all partitions > were automatically mounted by udisks. This is what fdisk says: > > ----------8<-----------8<-----------8<-----------8<-----------8<---------- > Disk /dev/sdc: 160.0 GB, 160041885184 bytes > 255 heads, 63 sectors/track, 19457 cylinders, total 312581807 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disk identifier: 0x00000000 > ----------8<-----------8<-----------8<-----------8<-----------8<---------- > > I'm attaching the first 1kb of the disk in the hope that it contains the > full partition map.
Hi Bernie, Thank you for the report. Two sectors (1KB) is almost enough. If you could send a little more, I'll take a look. If there are 4 partitions or fewer, 1.5KB is enough. If you have more than 4 partitions, then you might as well send sectors (17KB) worth. _______________________________________________ bug-parted mailing list bug-parted@gnu.org http://lists.gnu.org/mailman/listinfo/bug-parted
