This adds a second binary target to compile in
the rump USB stack instead of SATA/IDE using conditional
ifdefs to mostly share the code between the two translators.
This can be tested by running qemu with a USB3 controller as follows:
-drive if=none,id=usbstick,format=raw,file=/path/to/disk.img \
-device qemu-xhci \
-device usb-storage,drive=usbstick \
NB: /path/to/disk.img can be a block device on the host.
Then call grub module rumpusbdisk.static instead of rumpdisk.static
and pass ' root=part:X:device:sd0 noide' as gnumach parameters,
where X is the partition number of / within the disk/image.
Caveats: netdde seems to exhibit a bug when running 'ifdown /dev/eth0'
simultaneously to running the rumpusbdisk translator, due to
the two devices sharing the same IRQ.
---
rumpdisk/Makefile | 25 +++++++++++++++++++------
rumpdisk/block-rump.c | 14 ++++++++++++--
rumpdisk/main.c | 8 +++++++-
3 files changed, 38 insertions(+), 9 deletions(-)
diff --git a/rumpdisk/Makefile b/rumpdisk/Makefile
index b59aaf9a..0b496963 100644
--- a/rumpdisk/Makefile
+++ b/rumpdisk/Makefile
@@ -15,7 +15,9 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-RUMPLIBS=rump rumpuser rumpdev rumpdev_disk rumpdev_pci rumpvfs
rumpdev_ahcisata rumpdev_piixide rumpdev_ata
+RUMPLIBS=rump rumpuser rumpdev rumpdev_disk rumpdev_pci rumpvfs
+RUMPSATA=rumpdev_ahcisata rumpdev_piixide rumpdev_ata
+RUMPUSB=rumpdev_usb rumpdev_pci_usbhc rumpdev_umass
RUMPEXTRA=rumpdev_scsipi
# If we have a configured tree, include the configuration so that we
@@ -29,14 +31,25 @@ RUMPLIBS += rumpvfs_nofifofs
endif
dir := rumpdisk
-makemode := server
+makemode := servers
SRCS = main.c block-rump.c
LCLHDRS = block-rump.h ioccom-rump.h
-target = rumpdisk
-OBJS = $(SRCS:.c=.o)
+targets = rumpdisk rumpusbdisk
HURDLIBS = machdev ports trivfs shouldbeinlibc iohelp ihash fshelp
-LDLIBS += -lpthread -lpciaccess -ldl
-LDLIBS += -Wl,--whole-archive $(RUMPLIBS:%=-l%_pic) -Wl,--no-whole-archive
$(RUMPEXTRA:%=-l%_pic)
+LDLIBS += -lpthread -lpciaccess -ldl $(RUMPEXTRA:%=-l%_pic) \
+ -Wl,--whole-archive $(RUMPLIBS:%=-l%_pic) -Wl,--no-whole-archive
+
+%.disk.o: %.c
+ $(CC) $(CFLAGS) $(CPPFLAGS) -D_RUMP_SATA -c $< -o $@
+rumpdisk-OBJS = $(SRCS:.c=.disk.o)
+rumpdisk-LDLIBS += -Wl,--whole-archive $(RUMPSATA:%=-l%_pic)
-Wl,--no-whole-archive
+rumpdisk rumpdisk.static: $(rumpdisk-OBJS) $(HURDLIBS:%=-l%)
+
+%.usb.o: %.c
+ $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@
+rumpusbdisk-OBJS = $(SRCS:.c=.usb.o)
+rumpusbdisk-LDLIBS += -Wl,--whole-archive $(RUMPUSB:%=-l%_pic)
-Wl,--no-whole-archive
+rumpusbdisk rumpusbdisk.static: $(rumpusbdisk-OBJS) $(HURDLIBS:%=-l%)
include ../Makeconf
diff --git a/rumpdisk/block-rump.c b/rumpdisk/block-rump.c
index 5ceb14ae..a29ebe73 100644
--- a/rumpdisk/block-rump.c
+++ b/rumpdisk/block-rump.c
@@ -48,6 +48,12 @@
#define DISK_NAME_LEN 32
#define MAX_DISK_DEV 2
+#ifdef _RUMP_SATA
+#define RUMP_TYPE_STRING "rump SATA/IDE"
+#else
+#define RUMP_TYPE_STRING "rump USB"
+#endif
+
static bool disabled;
static mach_port_t master_host;
@@ -107,7 +113,11 @@ is_disk_device (const char *name)
{
const char *dev;
const char *allowed_devs[MAX_DISK_DEV] = {
+#ifdef _RUMP_SATA
"wd",
+#else
+ "sd",
+#endif
"cd"
};
uint8_t i;
@@ -158,7 +168,7 @@ rumpdisk_device_init (void)
{
device_close (device);
mach_port_deallocate (mach_task_self (), device);
- fprintf(stderr, "Kernel is already driving an IDE device, skipping
probing disks\n");
+ fprintf(stderr, "Kernel is already driving an IDE device, skipping
probing " RUMP_TYPE_STRING " disks\n");
fflush(stderr);
disabled = 1;
return;
@@ -172,7 +182,7 @@ rumpdisk_device_init (void)
{
device_close (device);
mach_port_deallocate (mach_task_self (), device);
- fprintf(stderr, "Kernel is already driving a SATA device, skipping
probing disks\n");
+ fprintf(stderr, "Kernel is already driving a SATA device, skipping
probing " RUMP_TYPE_STRING " disks\n");
fflush(stderr);
disabled = 1;
return;
diff --git a/rumpdisk/main.c b/rumpdisk/main.c
index 64065c6c..ca166274 100644
--- a/rumpdisk/main.c
+++ b/rumpdisk/main.c
@@ -32,6 +32,12 @@
#include <pthread.h>
#include <mach.h>
+#ifdef _RUMP_SATA
+#define RUMPNAME "rumpdisk"
+#else
+#define RUMPNAME "rumpusbdisk"
+#endif
+
mach_port_t bootstrap_resume_task = MACH_PORT_NULL;
static const struct argp_option options[] = {
@@ -128,7 +134,7 @@ main (int argc, char **argv)
}
rump_register_block ();
- machdev_trivfs_init (argc, argv, bootstrap_resume_task, "rumpdisk",
"/dev/rumpdisk", &bootstrap);
+ machdev_trivfs_init (argc, argv, bootstrap_resume_task, RUMPNAME, "/dev/"
RUMPNAME, &bootstrap);
/* Make sure we will not swap out, in case we drive the disk used for
swapping. */
--
2.40.1
