Dear all,
I'm gnubies here.
Succeeded installing debian gnu/hurd on my thinkpad t30. But strangely,
mach don't recognize my eepro100 card (and I'm sure this is the driver I
use in Linux 2.4/2.6).
I've tried recompiling mach,
1. gnumach-1.3, failed on some assembly statements, and since I don't
know much about assembly, I stop there.
2. Download gnumach source from debian ftp (package name:
gnumach_20040229.orig.tar.gz). Compilation work this time (I've
installed gcc-i38b-gnu and mig and stuffs before) with this configure
command: ./configure --enable-lpr --enable-floppy --enable-ide
--enable-eexpresspro100 --host=i386-gnu --build=i386-linux. But a reboot
to GNU still didn't give me eepro100.
What happened?
Below I attached my lspci -v output.
Best Regards,
-arief
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev
04)
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
(prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: e8000000-efffffff
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1800 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1820 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1840 [size=32]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42) (prog-if 00 [Normal
decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
I/O behind bridge: 00004000-00008fff
Memory behind bridge: d0200000-dfffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 8a [Master
SecP PriP])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 1860 [size=16]
Memory at 10000000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
Subsystem: IBM ThinkPad A/T/X Series
Flags: medium devsel, IRQ 5
I/O ports at 1880 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio
Controller (rev 02)
Subsystem: IBM ThinkPad T30
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at 1c00 [size=256]
I/O ports at 18c0 [size=64]
0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if
00 [Generic])
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at 2400 [size=256]
I/O ports at 2000 [size=128]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW
[Radeon Mobility 7500] (prog-if 00 [VGA])
Subsystem: IBM ThinkPad T30
Flags: bus master, stepping, fast Back2Back, 66MHz, medium devsel, latency 66,
IRQ 11
Memory at e8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
0000:02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev
01)
Subsystem: IBM ThinkPad T30/T40
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 03e1
0000:02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev
01)
Subsystem: IBM ThinkPad T30/T40
Flags: bus master, medium devsel, latency 168, IRQ 5
Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 03e1
0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM)
Ethernet Controller (rev 42)
Subsystem: IBM ThinkPad A/T/X Series
Flags: bus master, medium devsel, latency 66, IRQ 11
Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 8000 [size=64]
Capabilities: <available only to root>
_______________________________________________
Bug-hurd mailing list
[EMAIL PROTECTED]
http://lists.gnu.org/mailman/listinfo/bug-hurd
