Hi Mathieu, Mathieu <m...@disr.it> writes:
> Dear Guix users,
>
> For some reason, still to be understood, my EFI partition is no longer
> detected at boot and I cannot boot my existing Guix System. I could confirm
> that the Guix partition (encrypted) is fine, but my BIOS won't detect any
> bootable partition. Turns out my `/dev/nvme0n1p1` partition only contains a
> single file: `EFI/Guix/grubx64.efi`.
It could be broken 'nvram' of a motherboard. Because of that happened to
me on a single UEFI motherboard, personally I try not to use it at all,
but use all available disks instead.
With current Guix I'm not sure it is supported by the distribution. If
anyone would like to implement it in the upstream, here is my
configuration which I use [1] hopefully 'nvram' is not touched at all on
'guix system reconfigure' and survive a disk failure.
[…]
> This looks like a bug since I did everything the guide indicates. Can anyone
> reproduce it and confirm that chrooting into an existing Guix installation to
> reconfigure and rescue the system does not work? Is there something missing in
> the how-to to prevent the D-bus crash? Would there be another way to save my
> system, i.e., reinstalling Guix from scratch on another SSD and then `dd` the
> LUKS partition from the broken SSD onto the root partition of the new one?
I could recommend to delete everything not required for a boot from the
configuration file and try to reconfigure again (warning that you will
probably get permission errors after adding those services again which
will require to 'chown' their state directories).
Another way to recover is reinstalling Guix from scratch, but it's
possible to do this without reformating or using another drive. Just
move every directory in your '/' to '/old-system' and proced regular
installation.
[1]: guix 1f734a6
repository URL: https://git.savannah.gnu.org/git/guix.git
branch: master
commit: 1f734a6f0a7db5b0e12091a0c869c5c4810ac80e
(define-module (bootloader grub)
#:use-module (gnu bootloader)
#:use-module (gnu bootloader grub)
#:use-module (guix gexp)
#:export (grub-efi-bootloader-removable))
(define install-grub-efi-removable
#~(lambda (bootloader efi-dir mount-point)
;; There is nothing useful to do when called in the context of a disk
;; image generation.
(when efi-dir
;; Install GRUB onto the EFI partition mounted at EFI-DIR, for the
;; system whose root is mounted at MOUNT-POINT.
(let ((grub-install (string-append bootloader "/sbin/grub-install"))
(install-dir (string-append mount-point "/boot"))
;; When installing Guix, it's common to mount EFI-DIR below
;; MOUNT-POINT rather than /boot/efi on the live image.
(target-esp (if (file-exists? (string-append mount-point efi-dir))
(string-append mount-point efi-dir)
efi-dir)))
;; Tell 'grub-install' that there might be a LUKS-encrypted /boot or
;; root partition.
(setenv "GRUB_ENABLE_CRYPTODISK" "y")
(invoke/quiet grub-install
"--boot-directory" install-dir
"--efi-directory" target-esp
;; do not write to nvram on the motherboard
"--no-nvram"
"--target=x86_64-efi"
"--removable")))))
(define grub-efi-bootloader-removable
(bootloader
(inherit grub-efi-bootloader)
(name 'grub-efi-bootloader-removable)
(installer install-grub-efi-removable)))
config.scm:
--8<---------------cut here---------------start------------->8---
(operating-system
;; ...
(bootloader (bootloader-configuration
(bootloader grub-efi-bootloader-removable)
(targets '("/boot1/efi"
"/boot2/efi"
"/boot3/efi"))))
(file-systems (cons* (file-system
(device (file-system-label "boot1"))
(mount-point "/boot1/efi")
(type "vfat"))
(file-system
(device (file-system-label "boot2"))
(mount-point "/boot2/efi")
(type "vfat"))
(file-system
(device (file-system-label "boot3"))
(mount-point "/boot3/efi")
(type "vfat"))
;; ...
%base-file-systems)))
--8<---------------cut here---------------end--------------->8---
/boot?/efi current state:
--8<---------------cut here---------------start------------->8---
oleg@guixsd ~$ find /boot?/efi -type f -exec ls -l {} \;
-rwxr-xr-x 1 root root 159744 May 8 2022 /boot1/efi/EFI/Guix/grubx64.efi
-rwxr-xr-x 1 root root 159744 Nov 16 04:28 /boot1/efi/EFI/BOOT/BOOTX64.EFI
-rwxr-xr-x 1 root root 159744 Mar 17 2022 /boot2/efi/EFI/Guix/grubx64.efi
-rwxr-xr-x 1 root root 159744 Nov 16 04:28 /boot2/efi/EFI/BOOT/BOOTX64.EFI
-rwxr-xr-x 1 root root 76 Feb 9 2020 '/boot2/efi/System Volume
Information/IndexerVolumeGuid'
-rwxr-xr-x 1 root root 12 Feb 9 2020 '/boot2/efi/System Volume
Information/WPSettings.dat'
-rwxr-xr-x 1 root root 129 Feb 9 2020 '/boot2/efi/$RECYCLE.BIN/desktop.ini'
-rwxr-xr-x 1 root root 159744 Nov 16 04:28 /boot3/efi/EFI/BOOT/BOOTX64.EFI
--8<---------------cut here---------------end--------------->8---
as you can see /boot?/efi/EFI/BOOT/BOOTX64.EFI is the thing needed for
boot, everything else probably a garbage.
mount points:
--8<---------------cut here---------------start------------->8---
oleg@guixsd ~$ findmnt | grep efi
│ ├─/sys/firmware/efi/efivars efivarfs efivarfs rw,relatime
├─/boot1/efi /dev/sdc1 vfat
rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
├─/boot2/efi /dev/sda1 vfat
rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
├─/boot3/efi /dev/sdd1 vfat
rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
--8<---------------cut here---------------end--------------->8---
'/boot/grub' is not configured anywhere, but it's placed on a '/' mount
point which mounted from a raid disk array.
signature.asc
Description: PGP signature
