On Tue, Sep 13, 2016 at 4:52 PM, Ludovic Courtès <l...@gnu.org> wrote:
> Hello! > > Eus <e...@member.fsf.org> skribis: > > > Sorry for replying just now. I did not try to reproduce the bug back at > > that time. So, I took the time yesterday to try to reproduce the bug. > And, > > I cannot reproduce the problem after repeating the following rough steps > > two times with the same bootable disk and machine and network (but the > > external connection to the ISP may have changed in the mean time): > > > > 1. Format my /dev/sda8 > > 2. Swapon my /dev/sda7 > > 3. mount my /dev/sda8 to /mnt > > 4. herd start cow-store /mnt > > 5. umount /tmp > > 6. mount --bind /mnt/tmp2 /tmp > > 7. ifconfig, wpa_supplicant, dhclient > > 8. guix pull > > 9. guix system --no-grub --keep-failed init /mnt/etc/config.scm /mnt > > Normally step #8 can be omitted because hydra.gnu.org still has binaries > for the packages 0.11.0 provides. > Oh, I retried everything with 0.10.0 since I had the problem back then with 0.10.0. I have not had the chance to try 0.11.0. > Step #6 is also redundant with step #4 (‘herd start cow-store’ make /tmp > a bind mount to /mnt/tmp; see gnu/system/install.scm:154.) > Thank you for letting me know this. That will save my time in the future. > > The whole process took just about 100 minutes. > > That’s a lot of time. > Really? What is your approximate time? Perhaps it is because I used 0.10.0, guix pull, and my Internet connection here is slow. > > So, I cannot reproduce the bug. > > Great. Thanks for taking the time to verify! > Anytime! > Ludo’. > -- Eus
