Andreas Enge <andr...@enge.fr> writes:
> On Wed, Oct 07, 2015 at 10:32:43PM +0200, Ludovic Courtès wrote:
>> Do you think it’s a likely problem? Andreas, could you try again on
>> your Novena with 2 cores turned off?
>
> I have trouble believing the explanation of overheating. The gmp test
> suite is carried out sequentially (they are not yet using the parallel
> test harness of the autotools). So one could only imagine that the build
> itself was faulty, but should then the test not fail consistently afterwards?
> If I understood correctly, you used one build and ran the same test
> over and over again. On the other hand, since the machine also serves as a
> build machine, it is possible that some other package was built at the same
> time as the tests were carried out, which may have contributed to heating.
Exactly.
FWIW, I looked through my archive of build failure logs, and found that
the same 'reuse' test failed around September 10th on hydra-slave1, the
Novena donated by Steve Sprang. I know that on a few occasions I forgot
to disable 2/4 cores, and that might have been one of those times.
Actually, right now hydra-slave1 has all 4 cores enabled and it seems to
be doing alright. I also built 'gmp' again on it with 4 cores, and it
passed the 'reuse' test. I aborted the build after that test passed,
and left the build directory in /tmp, so we could try running the
'reuse' test repeatedly if desired.
Mark
