Please note that I've posted questions about two different problems. The status display was due to incorrect system time configuration, and that's solved.
[Nicolas Pitre] > On Sat, 30 Apr 2016, Mario Lang wrote: > > > Lars Bjørndal <l...@lamasti.net> writes: > > > > > After more digging, I find that the problem occures on a Raspberry pi > > > only, and not on a pc that I tried. > > > > This confirms my original guess, it is an ARM/Kernel/rpi thing. > > > > I am not exactly sure if it provides useful extra information, but one > > thing to try would be to use the USB logging fascilities of the kernel. > > Maybe Nicolas can chime in here to let us know what we can try to narrow > > this down, IIRC he does (or did?) ARM kernel development? > > Istill do. However, time handling is for the most part architecture > independent. Mario here referes to a problem I posted under the subject `BRLTTY, HT Active Braille on Raspberry pi 2, USB'. Using BRLTTY with a Handy Tech Active Braille connected via USB on a Raspberry pi 2b, with Fedora 22 ARM, is really slugish. > I just built and tested BRLTTY natively on a RPI running latest Raspbian > here and everything just works, including the time display with the > proper time zone. > > One thing to remember, though, is that the RPI has no battery-----backed > real time clock. That means it needs access to the internet to set the > current time, or you must set it manually, on every reboot. > > > On a pragmatic note, Lars, just move to bluetooth for the time being, > > that should work, does it? Yes, Active braille works perfectly on bluetooth. I need USB for emergency situations only, now and then. > I don't think the displayed time will be any different. Nicolas, do you have access to the thread I mentioned and have any ideas on what can be the connection/communication problem? Thanks and regards, Lars _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
