[quoted lines by Mike Gorse on 2016/01/08 at 13:26 -0500] >The After= line doesn't appear to be necessary; if I remove it, then >systemd still unloads brltty when I disconnect my device, but it is >still possible to start brltty manually via systemd without a USB >device connected. Revised patch attached.
Thanks. I've finally gotten around to looking at this one. I have a couple of questions: >--- a/Autostart/Systemd/brltty.service.in >+++ b/Autostart/Systemd/brltty.service.in >+BindsTo=dev-braille.device ... >--- a/Autostart/Udev/udev.rules >+++ b/Autostart/Udev/udev.rules >+SYMLINK+="braille" Am I correct that the symlink creates /dev/braille? If so, why is the BindsTo to dev-braille? Is dev- a magic prefix that means /dev? Are you able to test this with two USB braille devices? I'm interested to know if each one starts its own brltty, and if disconnecting each one stops the correct brltty. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
