I try that. both in BRLTTY and NVDA without any results. My
unprofesional gues is that the problem is that the brailledisplay
diden't show up as normal device do when you conect it to a computer.
But you have right. In jaws i selected Alva bc 640, or what it was????
But there is specific drivers wich comes with the converter for jaws,
Window eyes and some more screenreader. So my amatur gues is that the
driver in nvda or brltty must be modify in order to work with this
converter.
Den 2015-11-18 kl. 17:30, skrev Bram Duvigneau:
Hello,
If I remember correctly, Optelec made a converter device that converts
the old Voyager protocol to the Alva BC protocol. If that's the case,
please try NVDA without BRLTTY and just choose the Alva BC display in
NVDA's braille settings.
Bram
On 11/18/2015 5:07 PM, Alexander Masic wrote:
Hehe. I'M not a techguy to understand it clearly. However i conect it
from the brailledisplays uSB-port to the convertbox , and another usb
from the box in to the computer. My gues is the box converts from an
old usb-standard to a newer, or convert from 32 to 64 bit.
Another intresting thing is that Voyager does not shows up in my
device manager. But in devices and printers an unspecific device shows
up as, "USB converter".
However it works very well with jaws and Windows eyes.
Den 2015-11-18 kl. 16:13, skrev Dave Mielke:
[quoted lines by Alexander Masic on 2015/11/18 at 00:38 +0100]
I have now purchased an Convert box wich Optelec provide. The price
was more
or less robb. but ok. 70 cells display is 70 cells display. So now
it,s works
very well with both Jaws 17 and window eyes and other screenreaders
running
windows 10 64 bit maschine..
What does the box do? Do you access your Voyager via USB or via a
serial port?
But my problem is that i can't get it work together with brltty and
NVDA. And
i would like to use it with nvda. Because it's better in many
situation then
Jaws.
Do you mean directly with NVDA, or do you mean still via brltty?
If you're using brltty, we'd need to see a debug log that shows what's
happening when the problem occurs.
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
