[quoted lines by cov...@ccs.covici.com on 2014/03/06 at 08:18 -0500] >I again dumped a file after typing all 8 dots, that is what I did. So I >really don't know what is on the screen except a question mark, just >what is in the files.
Now that I know you're using hexdump to see what the characters are, I now also understand the 8BC3. Again, since Intel/AMD are little endian processors, this needs to be read as c38b, which is the UTF-8 encoding for 00CB, and that's an uppercase E with a diaeresis accent. This should sound familiar as we've already learned that the en-nabcc text table represents an uppercase E with a diaeresis accent as all eight dots. I'm now assuming, therefore, that it's the uppercase E with a diaeresis accent that isn't in your currently selected font. So everything is occurring as expected, including the presenting of a question mark on your braille device. Nothing has changed on your system, the relevant code hasn't changed within brltty, and yet something has changed. I'm convinced that the answer has to be which text table was/is being used. If you don't specify the text table then the default is to autoselect it based on your system's locale. In your case, text table autoselection would result in the en_US text table. If autoselection fails then the built-in text table, which is en-nabcc (unless you've explicitly configured it), is used. It's also reasonably predictable that, if you're explicitly specifying the text table, then you'd pick either of these (en_US or en-nabcc). So I checked out the en_US text table. In that one, all eight dots is - you guessed it - the section sign. So my current conclusion, which could be wrong, is that, while you're using the en-nabcc text table now, you were using the en_US text table then. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.com/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
