[quoted lines by Jean-Philippe MENGUAL on 2011/09/23 at 17:18 +0200] >I have a lot of problems to know how I can use BRLTTY on an Iris braille >display (Eurkhraille driver). Firstly, I search for keyboard bindings >for brltty functions.
The EuroBraille driver hasn't been converted to use key tables yet. You can, however, find a description of its key bindings within the file "brl-eu-all.txt". This file can be found either within the "Tables/" subdirectory of the source tree or within the directory "/etc/brltty/" (after install). >Lastly, I search specific driver parameters (such as -B). I know -B >protocol=clio but I search for variants if there are, Protocol is the only parameter supported by the EuroBraille driver. It can be set to either "clio" or "esysiris". >to speed the boot of Iris connection. If you're still using brltty-4.2, I think you'll find that the EuroBraille driver works a lot better, including faster, if you build from the development stream. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | 2011 May 21 is the End of Salvation. EMail: [email protected] | Canada K2A 1H7 | 2011 Oct 21 is the End of the World. http://FamilyRadio.com/ | http://Mielke.cc/bible/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
