Dave Mielke <[EMAIL PROTECTED]> writes: >>I can confirm this one, just happened to me. When it happened, >>I just pressed return to open a mail folder in Gnus, which basically >>means the cursor jumps down to the last line on the screen (since there is >>prompt). The jump is like from line 6 to line 50. > > Did you happen to check your status cells to see where brltty thought the > cursor was?
Now it happened again, and I reconfigured my status cells to show these infos. The fact is that the cursor is at an unknown location, the status cells correctly reflect its position. State dots also tells me that cursor tracking is on, but it apparently isn't working. I should add that the initiating event this time was me clicking a routing key to move the cursor from one cell to another on the same line. I hear the routing-started sound, but no routing end sound, no failed either. I dont remember if the cursor moved, I was so puzzled, but from then on, cursor tracking didn't work anymore. I should probably also add that I am currently running the SD speech driver (due to the recent testing stuff) but have autospeak set to no. > Did you try entering further input to see if the cursor would eventually > come back into view? Again this time, everyting works, the cursor is visible, but the display doesn't follow its movements. -- CYa, ⡍⠁⠗⠊⠕ | Debian Developer <URL:http://debian.org/> .''`. | Get my public key via finger mlang/[EMAIL PROTECTED] : :' : | 1024D/7FC1A0854909BCCDBE6C102DDFFC022A6B113E44 `. `' `- <URL:http://delysid.org/> <URL:http://www.staff.tugraz.at/mlang/> _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
