[quoted lines by Georgina Joyce on 2007/08/25 at 22:06 +0100] >Well it don't look good!
Well ... maybe it looks better than you think. >[EMAIL PROTECTED]:/dev/bus/usb# ls -1 >1 >2 >3 >4 >[EMAIL PROTECTED]:/dev/bus/usb# The bus numbers are there. It's just that they don't have leading zeros like they usually do and like brltty is expecting them to have. We should be able to adjust the code to accommodate this. Can you please do an ls on those bus subdirectories so that we can see if the device numbers, too, have no leading zeros? >[EMAIL PROTECTED]:/dev/bus/usb# lsusb >Bus 4 Device 1: ID 0000:0000 >Bus 1 Device 1: ID 0000:0000 >Bus 3 Device 2: ID 0403:fe72 Future Technology Devices International, >Ltd >Bus 3 Device 1: ID 0000:0000 >Bus 2 Device 1: ID 0000:0000 >[EMAIL PROTECTED]:/dev/bus/usb# Looks fine. >the /proc/bus/usb/ directory is empty. That's okay. It just means that they aren't mounting usbfs and that they want /dev/bus/usb to be used. -- Dave Mielke | 2213 Fox Crescent | I believe that the Bible is the Phone: 1-613-726-0014 | Ottawa, Ontario | Word of God. Please contact me EMail: [EMAIL PROTECTED] | Canada K2A 1H7 | if you're concerned about Hell. http://FamilyRadio.com/ | http://Mielke.cc/bible/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
