None of the relevent specs (EFI, DT, EBBR) specify the GUID for passing a DTB. Add it to the EBBR document so it is documented somewhere relevant.
Fixes: #45 Cc: Andrei Warkentin <[email protected]> Cc: Francois Ozog <[email protected]> Signed-off-by: Grant Likely <[email protected]> --- source/chapter2-uefi.rst | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/source/chapter2-uefi.rst b/source/chapter2-uefi.rst index f6a5802..cf2f652 100644 --- a/source/chapter2-uefi.rst +++ b/source/chapter2-uefi.rst @@ -86,6 +86,16 @@ tables. - An Advanced Configuration and Power Interface [ACPI]_ table, or - a Devicetree [DTSPEC]_ system description +A Devicetree system description MUST be provided in Flattened Devicetree (DTB) +format version 17 or higher. +The following GUID must be used in the EFT system table to identify the DTB. + +.. code-block:: c + + #define EFI_DTB_GUID \ + EFI_GUID(0xb1b621d5, 0xf19c, 0x41a5, \ + 0x83, 0x0b, 0xd9, 0x15, 0x2c, 0x69, 0xaa, 0xe0) + As stated above, EBBR systems must not provide both ACPI and Devicetree tables at the same time. Systems that support both interfaces must provide a configuration -- 2.20.1 IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ boot-architecture mailing list [email protected] https://lists.linaro.org/mailman/listinfo/boot-architecture
