Hi Gary,
I have one of those and use it when I get on the Vintage SSB net (which is
not nearly often enough) with a CE20. It works well with that level of drive
If you're still stuck for a manual let me know!
John
At 09:41 AM 9/29/2014, Gary H. Harmon, Jr. wrote:
I picked up a ragged LA-1 amplifier yesterday. It looks complete but has
some unknown mods at this time. There is an extra switch in the front panel
and the 6m coax to the rear panel has been disconnected. The meter is also
missing its cover. The manual on BAMA is rough with several pages hard to
read.
It came with a large schematic and chassis layout as well as an Engineering
Bulletin dated Nov 12, 1958 "Modification of Function Switch in LA-1 Linear
Amplifier". The article states the changes will eliminate excessive arching
at function switch.
Here's what I need:
(1) An original or good copy of the manual.
(2) Meter or meter cover.
(3) Anything else I am not thinking about.
73,
Gary H. Harmon, Jr. - K5JWK - HAM Radio Archaeologist
6003 Archwood
San Antonio, TX 78239-1504
210.657.1549h / 210.884.6926c/t
gharmon (at) idworld.net
"Retirement = Every day is a Saturday except Sunday"
http://www.grissomroadcoc.org
_______________________________________________
Boatanchors mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/boatanchors
III
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
_______________________________________________
Boatanchors mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/boatanchors
