ISIS +1 Em sex., 24 de jan. de 2025, 15:49, Pim van Pelt via Bird-users < bird-users@network.cz> escreveu:
> Hoi > > It is not possible because RFC5838 requires an IPv4 address in the IPv6 > Link LSA. You cannot do IPv4 unnumbered using link-local because of this > requirement. > > Groet > Pim > — > Pim van Pelt / PBVP1-RIPE > https://ipng.ch/ > > > On 24 Jan 2025, at 15:39, beno...@enki-multimedia.eu wrote: > > > > Thank you, for the linlks :) > > > > I was already using your post as a ref but I didn't found the right way > to get unnumbered addresses on freebsd. I'm still investigating it > > > > My initial expectation however was that it would work the same it does > for IPv6 passing the loopback using the local link IP as next hop. But it > doesn't seem to it without the trick you use on linux. At least on 1.16.1 . > Is there a way to do it wuthout an unnumbered interface ? > > > > > >> On 24 Jan 2025, at 02:24, Pim van Pelt via Bird-users < > bird-users@network.cz> wrote: > >> > >> Hoi Benoit, > >> > >> I did not try this on FreeBSD, but I did on Linux: > >> > https://ipng.ch/s/articles/2024/06/22/vpp-with-loopback-only-ospfv3-part-2/ > >> > >> and I discussed my travels in Paris at FRNOG'40 in > >> https://video.ipng.ch/w/9A9Zg83PXpunnBvncWYQHL > >> Hope that helps. > >> > >> groet, > >> Pim > >> > >> > >>> On 24.01.2025 01:38, benoitc--- via Bird-users wrote: > >>> Hi all, > >>> > >>> I am looking at reducing the number of IPv4s I am using but i'ms > truggling to have loopback propagation over local link using OSPv3 on > freebsd. > >>> > >>> Did someone tried it? Can you share your related configuration? > >>> > >>> when i setup the ip on lo1 and pass as stub in the OSPfV3 IPv4 > iinstances, no ipv4 route is exported. any hint is welcome. > >>> > >>> > >>> Benoît > >>> > >> > >> -- > >> Pim van Pelt <p...@ipng.ch> > >> PBVP1-RIPE - https://ipng.ch/ > >> > > > > > > > >
