Hi,
Do you alter krt_metric in you kernel protocol export filter? That could
cause such problem. There was recently a question about it in this mailing
list.
Regards,
Alexander
On Mon, Jun 3, 2024, 03:40 이재용 <jaeyong....@nhn.com> wrote:
> Hello,
>
> We use BIRD for communication with servers with higher-level switches.
>
> But recently we came across the following case:
>
> server run as a ecmp routing.
>
> 10.171.0.0/24 proto bird
> nexthop via 10.171.0.25 dev p0 weight 1
> nexthop via 10.171.1.25 dev p1 weight 1
>
> For a change higher-level switches, we adjusted our ibgp LP value to flow
> traffic as a one path.
>
> As we expected, servers routing are changed as one path routing
>
> 10.171.0.0/24 proto bird
>
> but, one server has a two same net range routing. like this sample
>
> case1)
>
> 10.171.0.0/24 proto bird
>
> 10.171.0.0/24 proto bird metric 32
> nexthop via 10.171.0.25 dev ${interface1}
> nexthop via 10.171.1.25 dev ${interface2}
>
> case2 )
>
> 10.171.0.0/24 proto bird metric 32
>
> 10.171.0.0/24 proto bird
> nexthop via 10.171.0.25 dev ${interface1}
> nexthop via 10.171.1.25 dev ${interface2}
>
> in case1, there was any problem , but in case 2 it had. (flow packet as two
> paths)
>
> in my thought, pervious routing not deleted.
>
> So, two same range is now avaliable.
>
> if there are someone who have same problem, would you advise for this problem?
>
>
