Hello Bird Users, I have an issue with adding static route and interfaces. I use two different platform one has interface names like eth-1_1_32 and second eth-1\1\64. First one works as I would expect.
First platform: ifconfig eth-1_1_32 eth-1_1_32: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 bird.conf: route 192.168.1.5/32 via fe80::2 % 'eth-1_1_32'; ip r 192.168.1.5 via inet6 fe80::2 dev eth-1_1_32 proto bird metric 32 but second platform with interfaces in eth-1\1\64 style didn’t work ifconfig eth-1\\1\\64 eth-1\1\64: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 I’ve got an error message for route 192.168.1.5/32 via fe80::2 % 'eth-1\1\64'; birdc BIRD 2.13 ready. bird> configure Reading configuration from /mnt/storage/config/bird.conf /mnt/storage/config/bird.conf:29:45 Invalid character in apostrophed symbol for: route 192.168.1.5/32 via fe80::2 % "eth-1\1\64"; bird> configure Reading configuration from /mnt/storage/config/bird.conf /mnt/storage/config/bird.conf:29:51 syntax error, unexpected TEXT for: route 192.168.1.5/32 via "fe80::2%eth-1\1\64"; no error and no entries in linux I did also tests with route 192.168.1.5/32 via "fe80::2%eth-1\\\1\\\64"; route 192.168.1.5/32 via "fe80::2%eth-1\\1\\64"; route 192.168.1.5/32 via fe80::2 % ’eth-1\\\1\\\64’; route 192.168.1.5/32 via fe80::2 % ’eth-1\\1\\64’; without any success Is it possible to make it work on both cases or there is some other way to configure such static route? Thanks, Marcin
