What's your `show protocols all` output for the BIRD side for the sessions with the switches, to confirm BIRD is advertising add-path TX and the switches advertising add-path RX? Do you see ADD-PATH capabilities showing up properly both on the local and neighbor capabilities (TX for local capabilities; RX neighbor capabilities (switches)?)
On Fri, Mar 3, 2023 at 7:49 AM Marek Zarychta <zarych...@plan-b.pwste.edu.pl> wrote: > W dniu 3.03.2023 o 16:27, Arnaud Houdelette-Langlois pisze: > > That's was an expected one, but as I send routes to another router and > > not to the kernel i would have expected that this would not have been > > an issue. I will try to update bird. > I might be wrong and misleading you then. Perhaps someone from BIRD > developers can shed more light on this, but if you can give try building > 2.0.12 with netlink support. > > Do you know if BSD port is up to date ? > > No, it's still 2.0.11 in ports, but you can use the patch from > bugzilla[1]. You'll need the most recent 13-STABLE or 14-CURRENT built > or 13.2-RC1 to build and run netlink flavor or the port. > > [1] https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=269553 > <https://isolate-menlo.menlosecurity.com/0/eJyrViotylGyUsooKSkottLXTypNL9ZLK0pNTSpO0csvSgcJVGXm5CTqF2fkl8cDeXrJ6Zn2mSm2RmaWpqbGSjpKRflKVoY6SiWZKUBzDE0szZVqARLCG8c> > > -- > Marek Zarychta > >
