Hello,
Based on the output you provided, it appears BIRD/OSPF is not seeing
your interfaces? In BIRD CLI, if you compare "show interfaces" with "show
ospf interfaces" do you see any difference? I am using a very basic config
(only defining cost) for each OpenVPN tun interface I am using, and its
working over here.
bird.conf:
protocol ospf SlothNet {
rfc1583compat yes;
area 0.0.0.0 {
networks {
172.22.150.64/26;
172.23.158.64/26;
};
stub no;
interface "tun-node43" {
cost 20;
};
interface "tun-node69" {
cost 180;
};
interface "tun-node96" {
cost 70;
};
interface "tun-node28" {
cost 130;
};
interface "eth1" {
cost 10;
};
interface "lo" {
stub;
};
};
}
bird output:
bird> show ospf
SlothNet:
RFC1583 compatibility: enabled
Stub router: No
RT scheduler tick: 1
Number of areas: 1
Number of LSAs in DB: 4
Area: 0.0.0.0 (0) [BACKBONE]
Stub: No
NSSA: No
Transit: No
Number of interfaces: 8
Number of neighbors: 3
Number of adjacent neighbors: 3
Area networks:
172.22.150.64/26 Advertise
172.23.158.64/26 Advertise
/Charles van Niman
On Wed, Mar 21, 2018 at 4:32 PM, Michael McConnell <
mich...@winkstreaming.com> wrote:
> I’ve also tried with pointtopoint and declared my neighors under the tap
> interface and made it pointtopoint without success;
>
> interface "tap*" {
> type pointopoint;
> cost 5;
> hello 5;
> wait 10;
> dead 25;
> authentication cryptographic; password “boogers";
> neighbors {
> 10.10.10.34;
> };
>
> };
>
>
>
>
> On Mar 21, 2018, at 3:08 PM, Michael McConnell <mich...@winkstreaming.com>
> wrote:
>
> Hello all,
>
> I am trying to establish OSPF over OpenVPN without any luck. The client
> side always turns up with no neighbours. I’ve tried pointtopoint and
> exclusively listing my neighbours all with no luck.
>
> I originally was using the tun interface and switched to tap hoping that
> would help, but still nothing.
>
> Below are my configurations, does anyone see anything obvious that I am
> missing?
>
> Thanks so much for your time and thoughts!
>
>
> ===
> show ospf
> ospf1:
> RFC1583 compatibility: disabled
> Stub router: No
> RT scheduler tick: 1
> Number of areas: 1
> Number of LSAs in DB: 1
> Area: 0.0.0.0 (0) [BACKBONE]
> Stub: No
> NSSA: No
> Transit: No
> Number of interfaces: 0
> Number of neighbors: 0
> Number of adjacent neighbors: 0
>
>
> Server ===
>
> protocol ospf {
> import all;
> export filter {
> ospf_metric1 = 1000;
> if source = RTS_STATIC then accept; else reject;
> };
> area 0 {
> networks {
> 10.40.32.0/24;
> 10.10.10.32/27;
> };
>
> interface "bond1" {
> type broadcast;
> cost 5;
> hello 5;
> wait 10;
> dead 25;
> authentication cryptographic; password “boogers";
> };
>
> interface "tap*" {
> type broadcast;
> cost 5;
> hello 5;
> wait 10;
> dead 25;
> authentication cryptographic; password “boogers";
> };
>
>
>
> interface "*" {
> cost 1000;
> stub;
> #type pointopoint;
> };
>
> };
>
>
>
> Client ===
> protocol ospf {
> import all;
> export filter {
> ospf_metric1 = 1000;
> if source = RTS_STATIC then accept; else reject;
> };
> area 0 {
> networks {
> 10.40.32.0/24;
> 10.10.10.32/27;
> };
>
> interface "bond1" {
> type broadcast;
> cost 5;
> hello 5;
> wait 10;
> dead 25;
> authentication cryptographic; password “boogers";
> };
> interface "tap*" {
> type broadcast;
> cost 5;
> hello 5;
> wait 10;
> dead 25;
> authentication cryptographic; password "boogers";
> };
>
> interface "*" {
> cost 1000;
> stub;
> #type pointopoint;
> };
> };
>
>
> --
> Michael McConnell
> WINK Streaming;
> email: mich...@winkstreaming.com <mich...@winkstreaming.com>
> toll free: 877-GO-4-WINK x 7400
> direct: +1 312 281-5434 <(312)%20281-5434>
> cell: +506 8706-2389 <+506%208706%202389>
> skype: wink-michael
> web: http://winkstreaming.com
>
>
>
>
>
