Pilot error, this works:
filter kernel_out {
if net = 0.0.0.0/0 then {
#krt_prefsrc from lo;
krt_prefsrc = 129.250.15.29;
accept;
}
reject;
}
I wish 'krt_prefsrc from lo' would work, as it would require less
tooling to generate config :>. But no biggy. Thanks people!
On 20 March 2018 at 20:22, Saku Ytti <s...@ytti.fi> wrote:
> I want default address to use lo as source for locally originated
> connections. Is this possible?
>
> bird> show route
> 0.0.0.0/0 via 204.141.224.2 on ens224 [static1 18:11:50] * (200)
> 129.250.15.29/32 dev lo [direct1 18:11:50] * (240)
> 129.250.0.0/16 via 204.141.224.2 on ens224 [red 18:17:38] * (100)
> [AS2914i]
> via 204.141.224.0 on ens192 [blue 18:11:56] (100) [AS2914i]
> bird>
>
> protocol static {
> route 0.0.0.0/0 recursive 129.250.0.0;
> }
>
> terraform00:~# ip route
> default via 204.141.224.2 dev ens224 proto bird metric 64
> default via 204.141.224.0 dev ens192 src 129.250.15.29 metric 200
> default via 204.141.224.2 dev ens224 src 129.250.15.29 metric 205
> 10.20.40.0/24 dev ens256 proto kernel scope link src 10.20.40.1
> 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown
> 204.141.224.0/31 dev ens192 proto kernel scope link src 204.141.224.1
> 204.141.224.2/31 dev ens224 proto kernel scope link src 204.141.224.3
> terraform00:~#
>
>
> --
> ++ytti
--
++ytti
