On Tue, Aug 01, 2017 at 09:26:29AM +0200, Luk wrote:
> What is proper syntax for this kind of show route:
>
> bird> show route protocol ECO where net ~ 2.2.2.250/31 all
> 2.2.2.250/31 via 1.1.1.66 on eth0.930 [ECO 08:53:25] * E2 (150/200/10000)
> [1.1.1.66]
> Type: OSPF-E2 unicast univ
> OSPF.metric1: 200
> OSPF.metric2: 10000
> OSPF.tag: 0x00000000
> OSPF.router_id: 1.1.1.66
> bird> show route protocol ECO where ospf_router_id ~ 1.1.1.66
> bird>
>
> I expect, that second show route should show the same output as first.
Like this?
root@eunetworks-2:~# birdc show route where ospf_router_id =
94.142.247.2 all
BIRD 1.6.3 ready.
94.142.247.2/32 via 94.142.247.243 on eth8.108 [ospf1 2017-07-19
23:09:36] * E2 (150/20/10000) [94.142.247.2]
Type: OSPF-E2 unicast univ
OSPF.metric1: 20
OSPF.metric2: 10000
OSPF.tag: 0x00000000
OSPF.router_id: 94.142.247.2
Kind regards,
Job
